Page 1
DISCRETE SEMICONDUCTORS
DATA SH EET
M3D176
BZV86 series
Low-voltage stabistors
Product specification
Supersedes data of April 1992
1996 Mar 21
Page 2
Philips Semiconductors Product specification
Low-voltage stabistors BZV86 series
FEATURES
• Low-voltage stabilization
• Forward voltage range: 1.4 to 3.2 V
DESCRIPTION
Low-voltage stabilization diode in a hermetically-sealed SOD27 (DO-35) glass
package. The series consists of four types: BZV86-1V4 to BZV86-3V2.
• Total power dissipation:
max. 330 mW
• Differential resistance range:
max. 20 to 35 Ω.
APPLICATIONS
• Power clipping
The diodes are type branded.
handbook, halfpage
k
a
MAM246
• Level shifting
• Low-voltage regulation
Fig.1 Simplified outline (SOD27; DO-35) and symbol.
• Temperature stabilization.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
R
I
F
continuous reverse voltage − 10 V
continuous forward current
BZV86-1V4 − 200 mA
BZV86-2V0 − 150 mA
BZV86-2V6 − 125 mA
BZV86-3V2 − 100 mA
P
tot
T
stg
T
j
total power dissipation T
=25°C − 330 mW
amb
storage temperature −65 +150 °C
junction temperature − 150 °C
1996 Mar 21 2
Page 3
Philips Semiconductors Product specification
Low-voltage stabistors BZV86 series
ELECTRICAL CHARACTERISTICS
T
=25°C unless otherwise specified.
j
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V
F
I
R
r
dif
r
dif
r
dif
S
F
C
d
forward voltage IF= 5 mA; see Fig.2
BZV86-1V4 1.30 − 1.50 V
BZV86-2V0 1.85 − 2.15 V
BZV86-2V6 2.35 − 2.80 V
BZV86-3V2 2.85 − 3.45 V
reverse current VR=5V −−200 nA
differential resistance IF= 1 mA; f = 1 kHz
BZV86-1V4 − 55 −Ω
BZV86-2V0 − 80 −Ω
BZV86-2V6 − 90 −Ω
BZV86-3V2 − 100 −Ω
differential resistance IF= 5 mA; f = 1 kHz
BZV86-1V4 − 10 20 Ω
BZV86-2V0 − 15 30 Ω
BZV86-2V6 − 18 32.5 Ω
BZV86-3V2 − 20 35 Ω
differential resistance IF= 10 mA; f = 1 kHz
BZV86-1V4 − 610Ω
BZV86-2V0 − 815Ω
BZV86-2V6 − 9 17.5 Ω
BZV86-3V2 − 10 20 Ω
temperature coefficient IF=5mA
BZV86-1V4 −−3.8 − mV/K
BZV86-2V0 −−6.0 − mV/K
BZV86-2V6 −−8.5 − mV/K
BZV86-3V2 −−11.5 − mV/K
diode capacitance VR= 0 V; f = 1 MHz − 15 25 pF
THERMAL CHARACTERISTICS
SYMBOL PARAMETER CONDITIONS VALUE UNIT
R
R
th j-tp
th j-a
thermal resistance from junction to tie-point 8 mm from the body 300 K/W
thermal resistance from junction to ambient lead length 10 mm 380 K/W
1996 Mar 21 3
Page 4
Philips Semiconductors Product specification
Low-voltage stabistors BZV86 series
GRAPHICAL DATA
2
10
handbook, halfpage
I
F
(mA)
10
1
−1
10
Tj=25°C.
1V4 2V0 2V6 3V2
2
341
VF (V)
Fig.2 Forward current as a function of forward
voltage; typical values.
MBG518
1996 Mar 21 4
Page 5
Philips Semiconductors Product specification
Low-voltage stabistors BZV86 series
PACKAGE OUTLINE
ndbook, full pagewidth
Dimensions in mm.
The marking band indicates the cathode.
The diodes are type-branded.
1.85
max
25.4 min
4.25
max
25.4 min
0.56
max
MLA428 - 1
Fig.3 SOD27 (DO-35).
DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1996 Mar 21 5
Loading...