Page 1
Specification for
BTHQ 21603V-STF-LV-LED Y.G.
with connector
BA TRON
Version June 2003
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
0
www.data-modul.de
Page 2
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 2 OF 12
DOCUMENT REVISION HISTORY 1:
DOCUMENT
DATE DESCRIPTION CHANGED
REVISION
FROM TO
A 2003.06.21 First Release
(Based Test Specification
VL-TS-BTHQ 21603VSS-XX
REV.E, 2003-05-05).
CHECKED
BY
BY
SUNNY LEE ZHOU CHUN
HUA
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 3
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 3 OF 12
CONTENTS
Page No.
1. GENERAL DESCRIPTION 4
2. MECHANICAL SPECIFICATIONS 4
3. INTERFACE SIGNALS 6
4. ABSOLUTE MAXIMUM RATINGS 7
4.1
ELECTRICAL MAXIMUM RATINGS (Ta=25qC)
4.2 ENVIRONMENTAL CONDITION 7
5. ELECTRICAL SPECIFICATIONS 8
5.1 TYPICAL ELECTRICAL CHARACTERISTICS 8
5.2 TIMING SPECIFICATIONS 9
5.3 TIMING DIAGRAM OF VDD AGAINST V0 11
5.4 CORRESPONDENCE BETWEEN CHARACTER CODES AND
CHARACTER PATTERNS (NOVATEK STANDARD NT3881D-01)
7
12
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 4
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 4 OF 12
Specification
of
LCD Module Type
Item No.: BTHQ 21603VSS-06
1. General Description
x 16 characters (5x8 dots) x 2 lines STN Positive Yellow Transflective Dot Matrix LCD module.
x Viewing Angle: 6 O’clock direction.
x Driving scheme: 1/16 Duty, 1/5 bias.
x ‘NOVATEK’ NT3881DH-01/AI (Die form) LCD Controller and Driver or equivalent.
x ‘SAMSUNG’ KS0065B-PCC (Die form) 40-Channel Segment/Common Driver for Dot Matrix LCD
or equivalent.
x Connector: 16 pins SMD "FULLCONN" connector (CON-16X1-35).
x Yellow - Green LED01 backlight.
2. Mechanical Specifications
The mechanical detail is shown in Fig. 1 and summarized in Table 1 below.
Table 1
Parameter Specifications Unit
Outline dimensions 53.0(W) x 20.0(H) x 8.0 MAX.(D) (Excluded connector) mm
Effective viewing area 36.0(W) x 10.0(H) mm
Active area 34.10(W) x 7.40(H) mm
Display format 16 characters x 2 lines Character size 1.85(W) x 3.15(H) (5 x 8 dots) mm
Character spacing 0.30(W) x 1.10(H) mm
Character pitch 2.15(W) x 4.25(H) mm
Dot size 0.358(W) x 0.381(H) mm
Dot spacing 0.015(W) x 0.015(H) mm
Dot pitch 0.373(W) x 0.396(H) mm
Weight: Approx. 11.0 grams
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 5
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 5 OF 12
Figure 1: Outline Drawing
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 6
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 6 OF 12
3. Interface signals
Table 2
Pin No. Symbol Description
1 VSS Ground (0V).
2 VDD Power supply for logic (+5V)
3 V0 Power supply for LCD driver
4 RS Register Select Input:
“High” for Data register (for read and write)
“Low” for Instruction register (for write),
Busy flag, address counter (for read)
5 R/W Read/Write signal:
“High” for Read mode.
“Low” for Write mode.
6 E Enable.
Start signal for data read /write.
7 DB0 Data input/output (LSB)
8 DB1 Data input/output
9 DB2 Data input/output
10 DB3 Data input/output
11 DB4 Data input/output
12 DB5 Data input/output
13 DB6 Data input/output
14 DB7 Data input/output (MSB)
15 LED(+) Anode of LED backlight
16 LED(-) Cathode of LED backlight
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 7
VL-FS-BTHQ 21603VSS-06 REV. A
A
H
V
H
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 7 OF 12
4. Absolute Maximum Ratings
4.1 Electrical Maximum Ratings (Ta = 25 ºC)
Table 3
Parameter Symbol Min. Max. Unit
Power Supply voltage (Logic) VDD - VSS -0.3 +7.0 V
Power Supply voltage (LCD drive) VLCD=VDD – V0 -0.3 +13.5 V
Input voltage Vin -0.3 VDD +0.3 V
Note:
The modules may be destroyed if they are used beyond the absolute maximum ratings.
All voltage values are referenced to VSS = 0V.
4.2 Environmental Condition
Table 4
Item
Operating
Temperature
(Topr)
Storage
Temperature
(Tstg)
Remark
Min. Max. Min. Max.
mbient Temperature
umidity
0qC +50qC -10qC +60qC
95% max. RH for Ta d 40qC
Dry
no condensation
< 95% RH for Ta > 40qC
ibration (IEC 68-2-6)
cells must be mounted
on a suitable connector
Shock (IEC 68-2-27)
alf-sine pulse shape
Frequency: 10 a 55 Hz
Amplitude: 0.75 mm
Duration: 20 cycles in each direction.
Pulse duration : 11 ms
Peak acceleration: 981 m/s2= 100g
3 directions
3 directions
Number of shocks : 3 shocks in 3
mutually perpendicular axes.
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 8
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 8 OF 12
5. Electrical Specifications
5.1 Typical Electrical Characteristics
At Ta = 25 qC, VDD = 5Vr5%, VSS=0V.
Table 5
Parameter Symbol Conditions Min. Typ. Max. Unit
Supply voltage (Logic) VDD-VSS 4.75 5.0 5.25 V
Supply voltage (LCD) VLCD
=VDD-V0
VDD=5.0V, Ta=0 qC,
Note1.
VDD=5.0V, Ta=25 qC,
- 4.7 - V
4.0 4.5 5.0 V
Note1.
VDD=5.0V, Ta=50 qC,
- 4.2 - V
Note1.
V
“H” level 2.2 - VDD V Input signal voltage 1
IH1
for E,DB0-DB7,R/W,RS.
for OSC1.
(Logic & LCD)
V
“L” level -0.3 - 0.8 V
IL1
V
“H” level VDD
IH2
- VDD V Input signal voltage 2
-1.0
V
“L” level VSS - 1.0 V
IL2
IDD
Character mode, Note 1 - 1.3 2.0 mA Supply Current
Checker board mode,
- 1.5 2.2 mA
Note 1
Character mode,
- 0.2 0.3 mA Supply Current (LCD) I0
Note 1
Checker board mode,
- 0.2 0.3 mA
Note 1
Supply voltage of yellow
green LED01 backlight
VLED Forward current
=20mA
3.9 4.0 4.1 V
Number of LED dies
=2x2=4
Note (1) : There is tolerance in optimum LCD driving voltage during production and it will be within
the specified range.
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 9
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 9 OF 12
5.2 Timing Specifications
At Ta = 0 qC To +50 qC, VDD = +5Vr5%, VSS = 0V.
Refer to Fig. 2, the bus timing diagram for write mode.
Table 6
Parameter Symbol Min. Max. Unit Remarks
Enable cycle time t
Enable ”High” level pulse width t
500 - ns
CYCE
300 - ns
WHE
Enable rise time tRE - 25 ns
Enable fall time tFE - 25 ns
AS
60 - ns 8-bit operation mode RS, R/W set-up time t
100 4-bit operation mode
RS, R/W address hold time tAH 10 - ns
Data output delay tDS 100 - ns
Data hold time t
10 - ns
DHR
Refer to Fig. 3, the bus timing diagram for read mode .
Table 7
Parameter Symbol Min. Max. Unit Remarks
Enable cycle time t
Enable ”High” level pulse width t
500 - ns
CYCE
300 - ns
WHE
Enable rise time tRE - 25 ns
Enable fall time tFE - 25 ns
AS
60 - ns 8-bit operation mode RS, R/W set-up time t
100 4-bit operation mode
RS, R/W address hold time tAH 10 - ns
Read data output delay tRD - 190 ns
Read data hold time t
20 - ns
DHR
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 10
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 10 OF 12
Figure 2: Bus write operation sequence (Writing data from MPU to NT3881D).
Figure 3: Bus read operation sequence (Reading out data from NT3881D to MPU).
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 11
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 11 OF 12
5.3 Timing Diagram of VDD against V0.
Power on sequence shall meet the requirement of Figure 4, the timing diagram of VDD against V0.
VDD
95%
LOGIC SUPPLY
VOLTAGE
0V
OV
LCD SUPPLY
VOLTAGE
V0
50ms(typical)
Figure 4: Timing diagram of VDD against V0.
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Page 12
VL-FS-BTHQ 21603VSS-06 REV. A
(BTHQ 21603V-STF-LV-LED Y.G. with connector)
JUNE/2003
PAGE 12 OF 12
5.4 Correspondence between Character Codes and Character Patterns
(NOVATEK Standard NT3881D-01)
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
Loading...