Datasheet BT131 Datasheet (Philips)

Download

Page 1

查询BT131-600D供应商查询BT131-600D供应商

BT131 series

Triacs logic level

Rev. 08 — 9 September 2005 Product data sheet

1. Product proﬁle

1.1 General description

Passivated, sensitive gate triacs in a SOT54 plastic package

1.2 Features

■ Designed to be interfaced directly to microcontrollers, logic integrated circuits and

other low power gate trigger circuits.

1.3 Applications

■ General purpose switching and phase control

1.4 Quick reference data

■ V

≤ 600 V (BT131-600) ■ I

DRM

≤ 800 V (BT131-800) ■ I

DRM

T(RMS) TSM

≤ 1A

≤ 12.5 A

2. Pinning information

Table 1: Pinning

Pin Description Simpliﬁed outline Symbol

1 main terminal 2 (T2) 2 gate (G) 3 main terminal 1 (T1)

123

SOT54 (TO-92)

sym051

T1 G

Page 2

Philips Semiconductors

BT131 series

Triacs logic level

3. Ordering information

Table 2: Ordering information

Type number Package

Name Description Version

BT131-600 TO-92 plastic single-ended leaded (through hole) package; 3 leads SOT54 BT131-800

4. Limiting values

Table 3: Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

DRM

T(RMS)

TSM

/dt rate of rise of on-state current ITM= 1.5 A; IG=20mA;

G(AV)

stg

repetitive peak off-state voltage

[1]

BT131-600

- 600 V

BT131-800 - 800 V

RMS on-state current all conduction angles;

= 51.2 °C;

lead

see

Figure 1, 4 and 5

non-repetitive peak on-state current

half sine wave; Tj=25°C prior to surge; see and

Figure 2

-1A

t = 20 ms - 12.5 A t = 16.7 ms - 13.8 A

t for fusing t = 10 ms - 1.28 A2s

/dt = 200 mA/µs

T2+ G+ - 50 A/µs T2+ G− -50A/µs T2− G− -50A/µs

T2− G+ - 10 A/µs peak gate current - 2 A peak gate power - 5 W average gate power over any 20 ms period - 0.1 W storage temperature −40 +150 °C junction temperature - 125 °C

[1] Although not recommended, off-state voltages up to 800 V maybeappliedwithoutdamage,butthetriacmay switch to the on-state. The

rate of rise of current should not exceed 3 A/µs.

Product data sheet Rev. 08 — 9 September 2005 2 of 12

Page 3

Philips Semiconductors

BT131 series

Triacs logic level

1.5

tot

(W)

0.5

0 0.2 0.4 0.6 0.8 1 1.2

a = form factor = I

T(RMS)/IT(AV)

Fig 1. Total power dissipation as a function of average on-state current; maximum values

TSM

(A)

003aab038

α =180° 120°

90° 60°

30°

T(RMS)

003aab041

Tj = 25 °C max

(A)

TSM

lead(max)

(°C)

125

1 10

f = 50 Hz

Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum

values

Product data sheet Rev. 08 — 9 September 2005 3 of 12

Page 4

Philips Semiconductors

BT131 series

Triacs logic level

tp (s)

003aab040

TSM

−1

TSM

(A)

Tj = 25 °C max

(1)

(2)

−5

−4

−3

−2

tp≤ 20 ms (1) dIT/dt limit (2) T2− G+ quadrant

Fig 3. Non-repetitivepeak on-state current as a function of pulse width for sinusoidal currents; maximum values

003aab039

T(RMS)

(A)

003aab042

1.2

T(RMS)

(A)

51.2 °C

−2

f = 50 Hz; T

−1

surge duration (s)

≤ 51.2 °C (1) T

lead

10110

Fig 4. RMS on-state current as a function of surge

duration, for sinusoidal currents; maximum

values

0.8

0.4

−50 0 50 100 150

= 51.2 °C

lead

(°C)

lead

Fig 5. RMS on-state current as a function of lead

temperature; maximum values

Product data sheet Rev. 08 — 9 September 2005 4 of 12

Page 5

Philips Semiconductors

BT131 series

Triacs logic level

5. Thermal characteristics

Table 4: Thermal characteristics

Symbol Parameter Conditions Min Typ Max Unit

th(j-lead)

thermal resistance from junction to lead

th(j-a)

thermal resistance from junction to ambient

[1] Mounted on a printed-circuit board; lead length = 4 mm

full cycle - - 60 K/W half cycle - - 80 K/W see Figure 6

[1]

- 150 - K/W

th(j-lead)

(K/W)

(1)

−1

−2

−5

−4

−3

(2)

−2

(1) half cycle (2) full cycle

Fig 6. Transient thermal impedance as a function of pulse width

003aab045

−1

11010

tp (s)

Product data sheet Rev. 08 — 9 September 2005 5 of 12

Page 6

Philips Semiconductors

BT131 series

Triacs logic level

6. Characteristics

Table 5: Characteristics

Tj = 25°C unless otherwise stated.

Symbol Parameter Conditions Min Typ Max Unit

Static characteristics

Dynamic characteristics

/dt rateof rise of off-state

/dt rate of change of

com

gate trigger current VD= 12 V; IT= 100 mA; see

Figure 8

T2+ G+ - 0.4 3 mA T2+ G− - 1.3 3 mA T2− G− - 1.4 3 mA T2− G+ - 3.8 7 mA

latching current VD= 12 V; IGT= 100 mA; see

Figure 10

T2+ G+ - 1.2 5 mA T2+ G− - 48mA T2− G− - 15mA T2− G+ - 2.5 8 mA

holding current VD= 12 V; IGT= 100 mA; see

- 1.3 5 mA

Figure 11

on-state voltage IT= 1.4 A; see Figure 9 - 1.2 1.5 V gate trigger voltage IT= 10 mA; gate open circuit;

see

Figure 7

= 12 V; IGT= 100 mA - 0.7 1.5 V

= 125 °C

off-state current VD=V

VDM=67% V voltage

exponential waveform; R

see

Figure 12

VDM= 400 V; Tj= 125 °C; commutating current

gate-controlled turn-on time

/dt = 0.5 A/ms

com

ITM= 1.5 A; VD=V

= 100 mA; dIG/dt = 5 A/µs

= 400 V; IGT= 100 mA;

DRM(max)

; Tj= 125 °C - 0.1 0.5 mA

DRM(max)

; Tj= 125 °C;

DRM(max)

=1kΩ;

;

0.2 0.3 - V

10 20 - V/µs

2--V/µs

-2-µs

Product data sheet Rev. 08 — 9 September 2005 6 of 12

Page 7

Philips Semiconductors

BT131 series

Triacs logic level

003aab043

Tj (°C)

GT(Tj)

GT(25°C)

1.6

1.2

0.8

0.4

−50 150100050

Fig 7. Normalizedgate trigger voltage as a function of

junction temperature

GT(Tj)

GT(25°C)

(1)

(2) (3)

(4)

−50 150100050

003aab044

(4) (3)

(2) (1)

Tj (°C)

(1) T2− G+ (2) T2− G− (3) T2+ G− (4) T2+ G+

Fig 8. Normalizedgate trigger current as a function of

junction temperature

001aab100

Tj (°C)

(A)

1.6

1.2

0.8

0.4

021.60.8 1.20.4

003aab037

(1) (2) (3)

VT (V)

L(Tj)

L(25°C)

−50 150100050

Vo= 0.92 V

Rs= 0.4 Ω. (1) Tj= 125 °C; typical values (2) Tj= 125 °C; maximum values (3) Tj=25°C; maximum values

Fig 9. On-state current characteristics Fig 10. Normalized latching current as a function of

junction temperature

Product data sheet Rev. 08 — 9 September 2005 7 of 12

Page 8

Philips Semiconductors

BT131 series

Triacs logic level

H(Tj)

H(25°C)

−50 150100050

001aab099

Tj (°C)

Fig 11. Normalized holding current as a function of

junction temperature

7. Package information

Epoxy meets requirements of UL94 V-0 at1⁄8 inch.

dVD/dt

(V/µs)

0 15010050

003aab046

Tj (°C)

Fig 12. Rate of rise of off-state voltage as a function of

junction temperature; minimum values

Product data sheet Rev. 08 — 9 September 2005 8 of 12

Page 9

Philips Semiconductors

BT131 series

Triacs logic level

8. Package outline

Plastic single-ended leaded (through hole) package; 3 leads SOT54

A L

0 2.5 5 mm

scale

DIMENSIONS (mm are the original dimensions)

UNIT

Note

1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities.

5.2

0.48

5.0

OUTLINE

VERSION

SOT54 TO-92 SC-43A

0.40

0.66

0.55

0.45

4.8

0.38

4.4

IEC JEDEC JEITA

1.7

4.2

1.4

3.6

REFERENCES

2.54

1.27

14.5

12.7

(1)

max.

2.5

EUROPEAN

PROJECTION

ISSUE DATE

04-06-28 04-11-16

Fig 13. Package outline SOT54 (TO-92)

Product data sheet Rev. 08 — 9 September 2005 9 of 12

Page 10

Philips Semiconductors

BT131 series

Triacs logic level

9. Revision history

Table 6: Revision history

Document ID Release date Data sheet status Change notice Doc. number Supersedes

BT131_SER_8 20050909 Product data sheet - - BT131_SER_7 Modiﬁcations:

BT131_SER_7 20040101 Product speciﬁcation - - BT131_SER_6 BT131_SER_6 20030801 Product speciﬁcation - - BT131_SER_5 BT131_SER_5 20001201 Product speciﬁcation - - BT131_SER_4 BT131_SER_4 20000501 Product speciﬁcation - - BT131_SER_3 BT131_SER_3 19980401 Product speciﬁcation - - -

• The format of this data sheet has been redesigned to comply with the new presentation and

information standard of Philips Semiconductors.

• Figure 5: corrected

Product data sheet Rev. 08 — 9 September 2005 10 of 12

Page 11

Philips Semiconductors

10. Data sheet status

BT131 series

Triacs logic level

Level Data sheet status

I Objective data Development This data sheet contains data from the objective speciﬁcation for product development. Philips

II Preliminary data Qualiﬁcation This datasheet contains data fromthe preliminary speciﬁcation. Supplementary datawill be published

III Product data Production This data sheet contains data from the product speciﬁcation. Philips Semiconductors reserves the

[1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at

URL http://www.semiconductors.philips.com.

[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.

[1]

Product status

11. Deﬁnitions

Short-form speciﬁcation — The data in a short-form speciﬁcation is

extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook.

Limiting values deﬁnition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the speciﬁcation is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warrantythatsuch applications will be suitable for the speciﬁed use without further testing or modiﬁcation.

[2] [3]

Deﬁnition

Semiconductors reserves the right to change the speciﬁcation in any manner without notice.

at a laterdate. Philips Semiconductors reserves the right tochange the speciﬁcation without notice, in order to improve the design and supply the best possible product.

right to make changes atany time in order to improvethedesign, manufacturing and supply.Relevant changes will be communicated via a Customer Product/Process Change Notiﬁcation (CPCN).

customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.

Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notiﬁcation (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, andmakes norepresentations or warrantiesthat these productsare free frompatent, copyright, or maskwork right infringement, unless otherwise speciﬁed.

13. Trademarks

12. Disclaimers

Life support — These products are not designed for use in life support

appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors

Notice — All referenced brands, product names, service names and trademarks are the property of their respective owners.

14. Contact information

For additional information, please visit: http://www.semiconductors.philips.com For sales ofﬁce addresses, send an email to: sales.addresses@www.semiconductors.philips.com

Product data sheet Rev. 08 — 9 September 2005 11 of 12

Page 12

Philips Semiconductors

15. Contents

1 Product proﬁle . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5

6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 6

7 Package information . . . . . . . . . . . . . . . . . . . . . 8

8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9

9 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 10

10 Data sheet status. . . . . . . . . . . . . . . . . . . . . . . 11

11 Deﬁnitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

12 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

13 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

14 Contact information . . . . . . . . . . . . . . . . . . . . 11

BT131 series

Triacs logic level

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.

Published in The Netherlands

Date of release: 9 September 2005 Document number: BT131_SER_8