Page 1
Regulator ICs
PCMCIA / flash memory power supply
BP5310
The BP5310 is a DC / DC converter for supplying power to PCMCIA flash memory. From a power supply (5V) for
PCMCIA operations, the IC supplies a voltage for programming operations (12V).
Applications
Personal computers, CD-ROM players, portable information devices, and other PCMCIA-slot equipped devices
Features
1) Designed to provide power for PCMCIA / flash
memory programming operations (output voltage =
12V ± 5%; output current = 120mA)
2) The 5V operating voltage is same as the IC memory
card operating voltage.
3) Built-in short-circuit protection circuit.
4) Compact 9-pin SIL package.
5) Surface mounting is possible because parts are concentrated on one side.
Absolute maximum ratings
377
Page 2
Regulator ICs BP5310
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCTL = 5V)
FMeasurement circuit
378
Page 3
Regulator ICs BP5310
Pin descriptions
Application examples
(1) Flash memory that requires 5V for reading
Operation notes
(1) Place I / O external capacitors as near as possible
to the connection pins. In particular, make sure to minimize the impedance between the input-side capacitor
(C1) and pin 9.
(Reference value: A length less than 50mm for a copper
foil of 1.0mm wide and 35µm thickness.)
(2) Avoid frequent switching using the ON / OFF CTL
pin (five times per second at the maximum).
379
Page 4
Regulator ICs BP5310
(2) Pull-down of VP–P
The OFF output is pulled down through an effective resistance of 30kΩ.
(3) The module has a built-in short-circuit protection
circuit. Short-circuiting is assumed if the output voltage
does not reach 4.2V (typical) in 40ms (typical), and the
protection circuit starts to operate. When setting the out-
External dimensions (Units: mm)
put capacitor, we recommend considering the capacitance within the IC card and making the output voltage
to reach 8V or more in less than 20ms.
380
Loading...