Datasheet BMP 71 Datasheet (BRADY)

Download

One smart printer to print it all

www.bradyeurope.com

Content

BMP™71 Label Printer & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

High Performance Industrial Identification / Safety Identification . . . . . . . 10

General and Industrial Identification Labels . . . . . . . . . . . . . . . . . . . . . . 11

Wire And Cable Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Electrical Component Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Datacom Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Circuit Board and Component Identification Labels . . . . . . . . . . . . . . . . . 27

Security Identification Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Laboratory Identification Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Brady products are sold on the condition that the purchaser will test them in actual use and determine for himself/herself their suitability to his/her intended purpose Brady warrants to the purchaser that Brady products are free from defects in material and workmanship but limits its obligation under this warranty to the replacement of the product which has been shown to Brady’s satisfaction to have been defective at the time of its purchase.

The warranty does not extend to any persons who have acquired the product from the purchaser. It is in lieu of any other warranty, including every warranty of sale-ability, marketability or suitability for the intended purpose, and is also in lieu of any other obligation or liability on the part of Brady.

Under no circumstances will Brady be liable for losses, damage, costs or subsequent damage of whatever nature which may arise in connection with the use of, or inability to use, Brady’s products.

BMP™71 Label Printer

The BMP71 mobile label printer can print on more than 30 different types of label material – all designed with Brady’s industrial-strength durability.

Whether you need heat shrink sleeves, die-cut labels or indoor/outdoor vinyl, you can be conﬁdent that the BMP71 printer has the right label material for your application.

Speed up your labelling

The powerful BMP71 prints faster than any other printer in it’s class (38 mm/sec). Don’t wait longer than necessary for your labels.

The full keyboard lets you type labels in less time

The BMP71 has a full keyboard, available in 4 different versions: QWERTY, AZERTY, QWERTZ and CYRILLIC. Use both your hands to type your label instead of one ﬁnger and save time!

The enlarged full colour screen makes your label printing so much easier

The enlarged screen of the BMP71 enables to see the whole label at once, helping you to compose the label in the most efﬁcient way, eliminating trial and error!

One smart printer to print it all

The BMP71 is your essential tool that handles all your label printing needs.

Order Reference Description

BMP71-QWERTY-UK Printer, Hard Carry Case, 2 Label Rolls, 1 Black Ribbon Cartridge,

BMP71-QWERTY-EU As above but with European Power Supply BMP71-AZERTY-EU As above but with AZERTY Keyboard and European Power Supply BMP71-QWERTZ-EU As above but with QWERTZ Keyboard and European Power Supply BMP71-CYRILLIC-EU As above but with CYRILLIC Keyboard and European Power Supply M71-AC-EU BMP71 European AC M71-AC-UK BMP71 UK AC M71-QC-EU BMP71 European Quick Charger M71-QC-UK BMP 71 UK Quick Charger M71-HC BMP71 Hard Carry Case M71-SC BMP 71 Soft Carry Case M71-AC-BC BMP71 AC/BATTERY CHARGER M71-BATT BMP71 SPARE BATTERY M71-CLEAN BMP71 CLEANING KIT M71-ADAPT BMP71 ROLL ADAPTER FOR TLS/HM

Rechargeable Battery Pack, AC Adaptor, USB Communications Cable, TLS2200® / HandiMark™ Material Roll Adaptor, Quick Start Guide, Product CD (w/ Printer Driver, Tutorials, Full User’s Guide), Cleaning Kit

www.bradyeurope.com 2

www.bradyeurope.com

Features – Printing Options

Printer

• Large full colour graphic LCD screen

• Display communicates important status information:

• Installed label part

• Label size and colour

• Amount of material remaining

• Remaining battery charge

• Label and area status

• Current font size and rotation

• Thermal transfer printing mechanism - 300 dpi

• High print speed of 38 mm/sec

• Weight : 2.5kg (w/battery)

• Handle to easily carry the printer anywhere you need it

• Built in industrial label cutter

• Print width 46 mm - Print length up to 1016 mm

• Stand alone or PC connectivity via USB

• Durable hard carry case

• Operating temperature range: 4° to 49°C

Labels

• The pre-deﬁned application templates and wizards save

time and make it easy to print the exact label you need

• Adjustable to six different widths of labels

• Can print up to 25 lines per label

• Batch label printing or print multiple copies of one label

• Ability to serialise data

• Prints mirror image

• Built-in Smart Cell Technology in labels and ribbons

Memory

• Ability to store, retrieve and delete label ﬁles

• Save over 100,000 labels!

• Built in time/date stamp

Battery

• Prints 4000 labels per battery charge

(25, 40 to 50 mm labels)

• Rechargeable Battery and AC power/battery charger

• Sleep mode conserves battery power when printer

is not in use

• UL and CUL listed battery charger

Label part number Font size Number of labels in

print ﬁle

Labels remaining

Battery charge remaining

Pre-deﬁned application templates

Label size

Ribbon remaining

Text

• Auto font sizing

• Custom True Type Font

• Text size 4 pt to 174pt (scaleable)

Label rotation

Number of areas

on current label

Symbols & Barcodes

• Standard electrical and datacom symbols included

• Barcode symbologies: Code 39 and Code 128

• Over 500 built in graphics

Prints all TLS2000® and Handimark™ label parts including bulk rolls. Users interested in upgrading to BMP™71 Printer, do not need to invest in a new set of consumables.

Easy way to create labels on your PC

™

with LabelMark

Brady’s LabelMark™ software lets you easily create labels for Asset ID, Component Marking, Telecom/ Datacom Labelling, Wire Markers and more. It allows users to design, edit and print their Brady labels. Integrates completely with Microsoft® Ofﬁce, AutoCAD® applications and more.

Labelling Software

Easy to Use Graphical Interface Label Design

• Option for line-edit or free-form mode for label design

• Several common barcode symbologies available

• Ability to import graphical images

• Data import support including spreadsheets, ASCII, ODBC and OLE DB

Label Editing

• Easy to use single screen editing

• Multiple document interface for working with different labels at the same time

• Ability to ﬂip/ﬂop data on label (i.e. ﬂip/ﬂop “to”/“from” order)

Software

Label Printing

• Compatible with all Brady media, stock and custom formats

• Works with a variety of different printers to suit various applications

Enhance your labels with advanced graphics and symbols with MarkWare™ software

With Brady’s MarkWare™ software you can combine text with graphics, symbols and barcodes. Labels can be used as visual tools throughout your facility. For lean enterprises, Brady’s MarkWare™ software provides additional graphics and templates for Signs, Labels, Pipe Markers and Tags - perfect for 5S, TPM and lean visuals.

Quick & Easy Label Design

• Includes label template designs. The size of the template

adjusts automatically to the size of the installed material, regardless of width

• Over 600 standardised symbols available

• Ability to import drawings, signs and diagrams

• Supports European CLP Hazardous Substances

Identiﬁcation labels containing GHS and ADR graphics

• Creation of pipe markers guaranteeing compliance based

on your choice of national standard

• 5 Barcode protocols and 19 languages

Label Editing

• Advanced functions allow quick label creation

(“align objects”, “group objects”, foreground/ background, zoom, rotation…)

• Employs all the basic functions of Windows®

applications (copy/paste within the application print preview, etc …).

Label Printing

• Windows®-compatible print driver included

• Windows® print driver adds the Brady printer

to your printer list. This authorises printing directly from other software such as drawing and other widely used creative programs

www.bradyeurope.com 4

www.bradyeurope.com

Applications

Patch Panel ID

Wire & Cable

Self-Laminating Labels

Electrical Panel ID

Wire & Cable Sleeves

Face Plate ID

Terminal Block

Markers

Wire & Cable

Wrap Around Labels

Desi-Strip Inserts Flag Labels

Tag Printing

Applications

Logistics Labelling Pipe Marking

Asset ID

Safety Identiﬁcation

Laboratory ID Information Signs

Circuit Board &

Component Labelling

Industrial

Barcode Labelling

www.bradyeurope.com 6

Security ID

www.bradyeurope.com

Materials and Ribbons Cross Reference Chart

Material

Number

Description

Nylon Cloth

B-499 Nylon Cloth with permanent

acrylic pressure sensitive adhesive

Paper

B-424 General Purpose Paper with

permanent latex adhesive

Polyester

B-422 Polyester with permanent

acrylic adhesive

B-423 Polyester with permanent

acrylic adhesive

B-428 Metallised polyester with

permanent acrylic adhesive

B-430 Clear polyester with

permanent acrylic adhesive

B-459 Polyester with permanent

acrylic adhesive

B-461 Self-laminating polyester with

permanent acrylic adhesive

B-473 Polyester with static

dissipative permanent acrylic adhesive

B-483 Polyester with permanent

rubber adhesive

B-486 Polyester with permanent

rubber adhesive

B-488 Polyester with permanent

acrylic adhesive

B-489 Polyester with permanent

rubber adhesive

B-582 BradyGlo™ Polyester with

acrylic adhesive

B-7593 EPREP: polyester tag on foam

carrier with permanent acrylic adhesive

Polyethylene

B-109 Polyethylene tag White Matt -40°C to 80°C

B-145 Polyethylene tag Grey Matt -40°C to 100°C

B-145FR Flame retardant rigid

polyethylene tag

B-7599 Polyethylene tag White Matt -40°C to 50°C

Polymide

B-426 Polymide with permanent

acrylic adhesive

B-477 Polymide with static

dissipative permanent acrylic adhesive

B-478 Polymide with static

dissipative permanent acrylic adhesive

Colour Finish Min./Max.

White Matt -70° to 90°C

White Matt -40° to 50°C

White Gloss -40° C to 100°C

White Gloss -40°C to 120°C

Silver Matt -40°C to 120°C

Clear Gloss -70°C to 100°C

White Matt -40°C to 110°C

White/ Translucent

White Gloss -40°C to 120°C

Silver Matt -40°C to 120°C

White Matt -40°C to 160°C

White Matt -40°C to 120°C

Phosphorescent

White, Yellow, Red, Green, Silver, Black

Grey Matt -40°C to 100°C

Amber Matt -70°C to 330°C

White Gloss -70°C to 300°C

Service Temperature

30 days

Matt -196°C to 130°C

30 days

Gloss -40°C to 80°C Photoluminescent safety

Gloss -40°C to 100°C

30 days

80 sec.

Application Special Properties Agency

Low proﬁle through-conduit wire marking, component and general labelling

Barcode and general labelling Good contrast and smear resistance

Electronic PCB ID and component, barcode label and rating plate, outlet and patch panel ID

Electronic PCB ID and component, barcode label, rating plates and outlets

Rating plates, electronic component marking

General labelling rating/name plates, outlet and general communications

Electronic PCB ID and component, barcode labelling and rating plates

Laboratory ID Excellent abrasion and smudge

Electronic PCB ID and component, barcode labelling and rating plates

General labelling; barcode label and rating plates

Electronic PCB and component; barcode label and rating plates

General labelling, barcode labelling and rating plates

identiﬁcation

Electrical components, switches, push buttons, rack and patch panels

Multi-purpose identiﬁcation tag, where durability is required

Power and ground labels Tear-resistant 2-sided printable tag

Multi-purpose identiﬁcation tag 250 µm polyethylene tag

Underside PCB and other high temperature, high performance applications

Top- or bottom-side board application for SMT or Through hole

1 mil low proﬁle top- or bottomside board application for SMT or Through hole

High adhesion makes all-purpose wire marker ideal for environments where heat, oil and dirt are present

2 mil adhesive recommended for application on textured surfaces

High adhesion make it ideal for highly textured and other surfaces that are difﬁcult to adhere to; Translucent

resistance Static dissipative adhesive and liner

Ultra-aggressive adhesive for thermal transfer printing, designed for powder coated surfaces

Metallised polyester with ultra-aggresive adhesive for oily, greasy and powdercoated surfaces

High performance matt white

Ultra-aggresive adhesive for oily, greasy and powder coated surfaces; UL/CSA approval pending

650 µm thick material with foam tape to replace engraved name plates; colour match available on demand

Cross-laminated polyethylene provides extreme tear resistance and excellent cold-weather performance

Withstands extremely high temperatures

Static dissipative adhesive and liner

Approvals/ Compliance

Recommended Ribbons

M71-R4300

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R4300

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R4300 M71-R6200

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R4300

M71-R4300 M71-R6200

M71-R6200

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R4300

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R6200

M71-R4300

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

These materials have static dissipative adhesives

These materials are UL recognised

*R-6900 ribbon comes in red, green, magenta, yellow and blue

These materials are CSA approved.

Halogen-Free (DIN VDE 0472/parts 815)

Materials and Ribbons Cross Reference Chart

Material

Number

Description

Polyoleﬁn

B-341 PermaSleeve™ heat shrink

polyoleﬁn sleeves

B-342 PermaSleeve™ heat shrink

polyoleﬁn sleeves

Polypropylene

B-412 Polypropylene tag White Matt -40°C to 100°C

B-425 Polypropylene with acrylic

adhesive

B-529 Economy polypropylene with

acrylic adhesive

Tedlar

B-437 Tedlar® with permanent

acrylic adhesive

B-642 Tedlar® with permanent

acrylic adhesive

Thermoplastic Polyether-polyurethane (PUR)

B-7643 Thermoplastic polyether

polyurethane tag

Vinyl

B-352 Vinyl with permanent acrylic

adhesive

B-427 Self-laminating vinyl with

permanent acrylic adhesive

B-530 Tamper evident vinyl with

acrylic adhesive

B-580 High Performance vinyl with

permanent acrylic adhesive

B-584 Reﬂective vinyl with acrylic

adhesive

B-581 Repositionable vinyl with

acrylic adhesive

B-7696 Rigid vinyl tag,

Rigid Durasleeve

Vinyl Cloth

B-498 Vinyl cloth with repositionable

rubber based adhesive

Colour Finish Min./Max.

White, Yellow Matt -40°C to 130°C

White, Yellow Matt -55°C to 130°C

White Matt -40°C to 100°C

Whit Gloss -40°C to 100°C Low-cost choice for indoor use

White, Yellow Matt -70°C to 135°C

White Matt -70°C to 120°C

White, Yellow Matt -40°C to 90°C

Silver Matt -40°C to 80°C

White Matt -70°C to 70°C

White Gloss -40°C to 90°C Tamper-resistant labels for

Red, Yellow, Blue, Green, White, Orange, Grey, Black, Brown, Purple, Clear, Gold, Ochre, Sky Blue, Light Blue, Pink, Tan

White, Yellow, Orange

White, Yellow Gloss -40°C to 82°C Indoor labels where frequent

White Gloss -40° C to 70°C

White Semi-

Service Temperature

1000 hours

30 days

Gloss -40°C to 82°C Safety identiﬁcation, pipe marking 5-year average outdoor durability

Gloss -40°C to 82°C Reﬂective quality makes material

30 days

-40°C to 82°C

gloss

30 days

Application Special Properties Agency

Wire marking 2-to-1 shrink ratio, self-extinguishing,

Wire marking 3-to-1 shrink ratio, self-extinguishing,

Wire, cable and product inventory information

Cable and wire markers, P- and T-labels

Aerospace and military cable marking

Self-laminating, wire and cable marking

Wire & cable marking Zero halogen, more colours available

Tamper-resistant labels for security ID; asset ID

Self-laminating wire and cable marking

security ID; asset ID

ideal for use in low-light conditions

repositioning is required

Sleeves, inserts, tags, terminal block markers

Wire and electronic component marking

meets the material and physical property of AMS-DTL-23053/5 Class 1, SAE AS-81531, MIL-STD-202, Method 215 and UL 224

Designed where tensile strength is needed

Excellent abrasion and smudge resistance

Self-extinguishing

Self-extinguishng, low smoke and ﬂame spread, excellent abrasion and smudge resistance

Metallised vinyl, designed to fracture easily

Excellent abrasion and smudge resistance

Designed to fracture easily

5-year average outdoor durability

Rigid construction

Repositionable adhesive

Approvals/ Compliance

Recommended Ribbons

M71-R4300

M71-R6200

M71-R4300

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R4300

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R4300

M71-R6000 M71-R4400-WT M71-R6900 (colours*)

M71-R6200

These materials have static dissipative adhesives

These materials are UL recognised

Tedlar® is a registered trademark of DuPont *R-6900 ribbon comes in red, green, magenta, yellow and blue

For more information on our materials or to help you choose, visit www.bradyeurope.com

These materials are CSA approved.

Halogen-Free (DIN VDE 0472/parts 815)

Brady has hundreds of RoHS compliant materials for you to choose from and we are committed to provide you with the latest information. Simply go to www.weeerohs.bradyeurope.com for the latest up-date.

www.bradyeurope.com 8

www.bradyeurope.com

Ribbons

Order Reference Colour

M71-R4300 Black 50.80 46 Strong environmental resistance against smearing and chemicals. Reliable, sharp-edge print quality to

M71-R4400-WT White 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

M71-R6000 Black 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

M71-R6200 Black 50.80 46 Designed for harsh environment labeling applications. Superior abrasion, chemical and heat resistance.

M71-R6400 Black 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

M71-R6800-WT White 50.80 46 Strong environmental resistance against smearing and chemicals. Reliable, sharp-edge print quality to

M71-R6900-BL Blue 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

M71-R6900-GN Green 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

M71-R6900-MA Magenta 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

M71-R6900-RD Red 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

M71-R6900-YL Yellow 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.

Ribbon Width (mm)

Ribbon Length (m)

Special property

maximize bar code readability.

Bulk Packaging

Bulk labels are designed for the BMP™71 Label Printer as a cost-effective solution for high volume labelling needs.

Order references beginning with “B” indicate bulk rolls.

High Performance Industrial Identiﬁcation / Safety Identiﬁcation

B-580 Indoor/Outdoor Vinyl:

• Brady’s indoor/outdoor grade vinyl tape adheres well to pipes, walls, equipment, windows – most clean, dry surfaces.

• Conforms well to irregular, curved or rough surfaces – it even stands up to grease, oil and most industrial chemicals.

• Five year average outdoor durability in temperatures from 82°C to -40°C, can be applied as low as -18°C.

Diagram Order Reference Width A (mm) Length B (m) Colour

M71C-500-580-WT 12.70 15.24 White

M71C-500-580-YL 12.70 15.24 Yellow

M71C-500-580-GN 12.70 15.24 Green

M71C-500-580-RD 12.70 15.24 Red

M71C-500-580-BL 12.70 15.24 Blue

M71C-500-580-LB 12.70 15.24 Light Blue

M71C-500-580-SB 12.70 15.24 Sky Blue

M71C-500-580-OR 12.70 15.24 Orange

M71C-500-580-BK 12.70 15.24 Black

M71C-500-580-GY 12.70 15.24 Grey

M71C-500-580-BR 12.70 15.24 Brown

M71C-500-580-GD 12.70 15.24 Gold

M71C-500-580-OC 12.70 15.24 Ochre

M71C-500-580-PL 12.70 15.24 Purple

M71C-500-580-PK 12.70 15.24 Pink

M71C-500-580-TN 12.70 15.24 Tan

M71C-500-580-CL 12.70 15.24 Clear

M71C-1000-580-WT 25.40 15.24 White

M71C-1000-580-YL 25.40 15.24 Yellow

M71C-1000-580-GN 25.40 15.24 Green

M71C-1000-580-RD 25.40 15.24 Red

M71C-1000-580-BL 25.40 15.24 Blue

M71C-1000-580-LB 25.40 15.24 Light Blue

M71C-1000-580-SB 25.40 15.24 Sky Blue

M71C-1000-580-OR 25.40 15.24 Orange

M71C-1000-580-BK 25.40 15.24 Black

M71C-1000-580-GY 25.40 15.24 Grey

M71C-1000-580-BR 25.40 15.24 Brown

M71C-1000-580-GD 25.40 15.24 Gold

M71C-1000-580-OC 25.40 15.24 Ochre

M71C-1000-580-PL 25.40 15.24 Purple

M71C-1000-580-PK 25.40 15.24 Pink

M71C-1000-580-TN 25.40 15.24 Tan

M71C-1000-580-CL 25.40 15.24 Clear

M71C-2000-580-WT 50.80 15.24 White

M71C-2000-580-YL 50.80 15.24 Yellow

M71C-2000-580-GN 50.80 15.24 Green

M71C-2000-580-RD 50.80 15.24 Red

M71C-2000-580-BL 50.80 15.24 Blue

M71C-2000-580-LB 50.80 15.24 Light Blue

M71C-2000-580-SB 50.80 15.24 Sky Blue

M71C-2000-580-OR 50.80 15.24 Orange

M71C-2000-580-BK 50.80 15.24 Black

M71C-2000-580-GY 50.80 15.24 Grey

M71C-2000-580-BR 50.80 15.24 Brown

M71C-2000-580-GD 50.80 15.24 Gold

M71C-2000-580-OC 50.80 15.24 Ochre

M71C-2000-580-PL 50.80 15.24 Purple

M71C-2000-580-PK 50.80 15.24 Pink

M71C-2000-580-TN 50.80 15.24 Tan

M71C-2000-580-CL 50.80 15.24 Clear

White Yellow Green Red

Blue

Black Grey Brown Gold

Ochre Purple

Clear

Light Blue Sky Blue Orange

Pink Tan

Order references with “C” (e.g. M71C) indicate continuous.

www.bradyeurope.com 10

www.bradyeurope.com

General and Industrial Identiﬁcation Labels

Repositionable Labels

• B-581 Repositionable Vinyl:

• Special adhesive allows easy removal of label to re-apply again and again.

• Best choice for indoor marking where frequent repositioning is required, such as shelves.

Diagram Order Reference Width A (mm) Length B (m) Colour

M71C-500-581-Yl 12.70 15.24 Yellow

M71C-500-581-WT 12.70 15.24 White

M71C-1000-581-YL 25.40 15.24 Yellow

M71C-1000-581-WT 25.40 15.24 White

M71C-2000-581-YL 50.80 15.24 Yellow

M71C-2000-581-WT 50.80 15.24 White

Order references with “C” (e.g. M71C) indicate continuous.

Reﬂective Labels

• B-584 Reﬂective Vinyl:

• Ideal for reading labels in low light conditions.

Diagram Order Reference Width A (mm) Length B (m) Colour

M71C-500-584-Yl 12.70 15.24 Yellow

M71C-500-584-WT 12.70 15.24 White

M71C-1000-584-YL 25.40 15.24 Yellow

M71C-1000-584-WT 25.40 15.24 White

M71C-2000-584-YL 50.80 15.24 Yellow

M71C-2000-584-WT 50.80 15.24 White

Order references with “C” (e.g. M71C) indicate continuous.

For more information on our materials or to help you choose, visit www.bradyeurope.com

General and Industrial Identiﬁcation Labels

Material to Surface Cross Reference Guide

Brady material number (B-number)

B-7351 B-352** B-422* B-432* B-435* B-427** B-580

B-483* B-486* B-489* B-499*

B-423* B-424 B-428* B-430* B-459* B-473* B-488* B-7546* B-7566 B-7576*

*Material UL recognised / CSA approved **Material UL recognised

Rating, Name Plate Labels

• B-422, B-423 Permanent Glossy Polyester

• B-424 General Purpose White Paper

• B-428 Permanent Metallised Polyester

• B-430 Permanent Clear Polyester

• B-483 Ultra-Aggresive Glossy Polyester

• B-486 Ultra-Aggresive Metallised Polyester

• B-489 Ultra-Aggresive Matt Polyester

• B-488 Matt Polyester

• B-499 Nylon Cloth

Smooth

(Examples: Uncoated Metal,

Plastic, Glass)

YES YES

YES YES YES

YES

Textured/Rough

(Examples: Textured ABS,

Cast Metal, Polycarbonate)

NO NO

Highly Textured / Low Surface Energy

(Examples: Powder Coated,

Low Surface Energy ABS, Polypropylene

Diagram Order

Reference

M71-16-483 500 25.40 9.53 Asset ID for textured surfaces 24 3

BM71-17-428 5000 25.40 12.70 General Purpose over-laminated ID 24 5

M71-17-428 500 25.40 12.70 General Purpose over-laminated ID 24 5

M71-17-483 500 25.40 12.70 Asset ID for textured surfaces 24 5

M71-17-486 500 25.40 12.70 Asset ID for oily, greasy and textured surfaces 24 5

M71-17-489 500 25.40 12.70 Asset ID for oily, greasy and textured surfaces 24 5

M71-19-423 250 25.40 25.40 Rating plate 24 10

BM71-19-423 2500 25.40 25.40 Rating plate 24 10

M71-19-483 250 25.40 25.40 Asset ID for textured surfaces 24 10

M71-20-424 100 50.80 25.40 General ID and Asset ID 46 10

BM71-20-424 1000 50.80 25.40 General ID and Asset ID 46 10

M71-20-428 100 50.80 25.40 Asset ID, silver finish 46 10

BM71-20-428 1000 50.80 25.40 Asset ID, silver finish 46 10

M71-20-483 100 50.80 25.40 Asset ID for textured surfaces 46 10

M71-20-486 100 50.80 25.40 Asset ID for oily, greasy and textured surfaces 46 10

M71-22-423 100 76.20 25.40 General ID 50 10

M71-22-428 100 76.20 25.40 Rating plate 50 10

M71-23-423 100 101.60 25.40 General ID 50 9

M71-23-483 100 101.60 25.40 Asset ID for textured surfaces 50 9

M71-24-423-BK 500 28.70 12.70 1.60 mm Black-bordered component ID 24 3

M71-26-423 100 69.85 31.75 General ID and Asset ID 50 13

M71-26-428 100 69.85 31.75 General ID and Asset ID 50 13

M71-29-428 500 38.10 12.70 Face plates, panels, equipment, silver finish 37 5

Labels Per Roll

Width A (mm)

Height B (mm)

Applications/ Descriptions

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Surface

Suitability

Any label 50.80 mm or larger is rotated on liner Order references beginning with “B” indicate bulk rolls. Continued on next page >>

Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.

www.bradyeurope.com 12

www.bradyeurope.com

General and Industrial Identiﬁcation Labels

Rating, Name Plate Labels (continued)

• B-422, B-423 Permanent Glossy Polyester

• B-428 Permanent Metallised Polyester

• B-430 Permanent Clear Polyester

• B-483 Ultra-Aggresive Glossy Polyester

• B-486 Ultra-Aggresive Metallised Polyester

• B-489 Ultra-Aggresive Matt Polyester

• B-488 Matt Polyester

• B-499 Nylon Cloth

Diagram Order

Reference

M71-29-483 500 38.10 12.70 Asset ID for textured surfaces 37 5

M71-29-486 500 38.10 12.70 Asset ID for oily, greasy and textured surfaces 37 5

M71-29-489 500 38.10 12.70 Asset ID for oily, greasy and textured surfaces 37 5

M71-30-422 250 38.10 19.05 Asset ID for textured surfaces 37 8

M71-30-483 250 38.10 19.05 Asset ID for oily, greasy and textured surfaces 37 8

M71-30-486 250 38.10 19.05 Asset ID for oily, greasy and textured surfaces 37 8

M71-30-499 250 19.05 38.10 Asset ID for oily, greasy and textured surfaces 18 16

M71-31-423 250 38.10 25.40 General ID 37 10

M71-31-483 250 38.10 25.40 Asset ID for textured surfaces 37 10

M71-32-423 250 38.10 38.10 General ID 37 16

M71-32-489 250 38.10 38.10 Asset ID for oily, greasy and textured surfaces 37 16

M71-37-422 100 76.20 48.26 Asset ID for textured surfaces 50 20

M71-37-423 100 76.20 48.26 General ID and Asset ID 50 20

M71-37-483 100 76.20 48.26 Asset ID for oily, greasy and textured surfaces 50 20

M71-37-486 100 76.20 48.26 Asset ID for oily, greasy and textured surfaces 50 20

M71-38-423 100 101.60 48.26 General ID and Asset ID 50 20

M71-38-428 100 101.60 48.26 Asset ID, silver finish 50 20

M71-38-483 100 101.60 48.26 Asset ID for oily, greasy and textured surfaces 50 20

M71-38-489 100 101.60 48.26 Asset ID for oily, greasy and textured surfaces 50 20

M71-78-499 250 48.26 25.40 General ID 46 10

M71-80-488 250 19.05 22.86 Asset ID with print durability 18 10

M71-81-488 750 48.26 6.35 Asset ID with print durability 46 10

M71-81-499 750 48.26 6.35 General ID 46 10

M71-84-499 500 22.86 12.70 General ID 22 2

M71-97-488 250 22.86 22.86 Asset ID with print durability 18 9

M71C-375-422 1 (cont.) 9.53 15.24 m General ID 50 3

M71C-375-430 1 (cont.) 9.53 15.24 m General ID 50 3

M71C-475-422 1 (cont.) 12.07 15.24 m General ID 50 5

M71C-500-423 1 (cont.) 12.70 15.24 m Small ICs 50 5

M71C-500-428 1 (cont.) 12.70 15.24 m Small ICs, silver finish 50 5

M71C-500-483 1 (cont.) 12.70 15.24 m Small IC’s, silver finish 50 5

M71C-625-422 1 (cont.) 15.88 15.24 m General ID 50 6

M71C-1000-422 1 (cont.) 25.40 15.24 m General ID 50 10

M71C-1000-430 1 (cont.) 25.40 15.24 m General ID 50 5

M71C-1000-483 1 (cont.) 25.40 15.24 m General ID 50 10

M71C-1900-422 1 (cont.) 48.26 15.24 m General ID 50 10

M71C-1900-430 1 (cont.) 48.26 15.24 m General ID 50 10

M71C-1900-483 1 (cont.) 48.26 15.24 m General ID 50 10

Labels Per Roll

Width A (mm)

Height B (mm)

Applications/ Descriptions

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Surface

Suitability

Any label 50.80 mm or larger is rotated on liner

Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.

General and Industrial Identiﬁcation Labels

General Industrial Labels

• B-422 Permanent Glossy Polyester

• B-430 Permanent Clear Polyester

• B-483 Ultra-Aggresive Glossy Polyester

• B-489 Ultra-Aggresive Matt Polyester

• B-580 Indoor/Outdoor Vinyl

Diagram Order

Reference

M71-16-483 500 White 25.40 9.53 14 2

M71-17-483 500 White 25.40 12.70 10 2

M71-17-489 500 White 25.40 12.70 10 2

M71-19-483 250 White 25.40 25.40 14 7

M71-20-483 100 White 50.80 25.40 50 4

M71-23-483 100 White 101.60 25.40 38 4

M71-29-483 500 White 38.10 12.70 14 2

M71-29-489 500 White 38.10 12.70 14 2

M71-30-422 250 White 38.10 19.05 14 3

M71-30-483 250 White 38.10 19.05 14 3

M71-31-483 250 White 38.10 25.40 14 4

M71-32-489 250 White 38.10 38.10 14 4

M71-37-422 100 White 76.20 48.26 28 9

M71-37-483 100 White 76.20 48.26 28 9

M71-38-483 100 White 101.60 48.26 38 9

M71-38-489 100 White 101.60 48.26 39 9

M71C-375-422 1 (cont.) White 9.53 15.24 m 50 2

M71C-375-430 1 (cont.) Clear 9.53 15.24 m 50 2

M71C-475-422 1 (cont.) White 12.07 15.24 m 50 2

M71C-500-422 1 (cont.) White 12.07 15.24 m 50 2

M71C-500-483 1 (cont.) White 12.70 15.24 m 50 2

M71C-500-580-BK 1 (cont.) Black 12.70 15.24 m 50 2

M71C-500-580-BL 1 (cont.) Blue 12.70 15.24 m 50 2

M71C-500-580-BR 1 (cont.) Brown 12.70 15.24 m 50 2

M71C-500-580-CL 1 (cont.) Clear 12.70 15.24 m 50 2

M71C-500-580-GD 1 (cont.) Gold 12.70 15.24 m 50 2

M71C-500-580-GN 1 (cont.) Green 12.70 15.24 m 50 2

M71C-500-580-GY 1 (cont.) Grey 12.70 15.24 m 50 2

M71C-500-580-LB 1 (cont.) Light Blue 12.70 15.24 m 50 2

M71C-500-580-OC 1 (cont.) Ochre 12.70 15.24 m 50 2

M71C-500-580-OR 1 (cont.) Orange 12.70 15.24 m 50 2

M71C-500-580-PK 1 (cont.) Pink 12.70 15.24 m 50 2

M71C-500-580-PL 1 (cont.) Purple 12.70 15.24 m 50 2

M71C-500-580-RD 1 (cont.) Red 12.70 15.24 m 50 2

M71C-500-580-SB 1 (cont.) Sky Blue 12.70 15.24 m 50 2

M71C-500-580-TN 1 (cont.) Tan 12.70 15.24 m 50 2

M71C-500-580-WT 1 (cont.) White 12.70 15.24 m 50 2

M71C-500-580-YL 1 (cont.) Yellow 12.70 15.24 m 50 2

M71C-625-422 1 (cont.) White 15.88 15.24 m 50 3

M71C-1000-580-BK 1 (cont.) Black 25.40 15.24 m 50 5

M71C-1000-580-BL 1 (cont.) Blue 25.40 15.24 m 50 5

M71C-1000-580-BR 1 (cont.) Brown 25.40 15.24 m 50 5

M71C-1000-580-CL 1 (cont.) Clear 25.40 15.24 m 50 5

M71C-1000-580-GD 1 (cont.) Gold 25.40 15.24 m 50 5

M71C-1000-580-GN 1 (cont.) Green 25.40 15.24 m 50 5

M71C-1000-580-GY 1 (cont.) Grey 25.40 15.24 m 50 5

M71C-1000-580-LB 1 (cont.) Light Blue 25.40 15.24 m 50 5

Labels Per Roll

Colour Width

A (mm)

Height B (mm)

Max. Characters per line for 7 points

Max. Lines of Text for 7 points

Surface

Suitability

Any label 50.80 mm or larger is rotated on liner Continued on next page >>

Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.

www.bradyeurope.com 14

www.bradyeurope.com

General and Industrial Identiﬁcation Labels

General Industrial Labels (continued)

• B-422 Permanent Glossy Polyester

• B-430 Permanent Clear Polyester

• B-483 Ultra-Aggresive Glossy Polyester

• B-580 Indoor/Outdoor Vinyl

Diagram Order

Reference

M71C-1000-580-OC 1 (cont.) Ochre 25.40 15.24 m 50 5

M71C-1000-580-OR 1 (cont.) Orange 25.40 15.24 m 50 5

M71C-1000-580-PK 1 (cont.) Pink 25.40 15.24 m 50 5

M71C-1000-580-PL 1 (cont.) Purple 25.40 15.24 m 50 5

M71C-1000-580-RD 1 (cont.) Red 25.40 15.24 m 50 5

M71C-1000-580-SB 1 (cont.) Sky Blue 25.40 15.24 m 50 5

M71C-1000-580-TN 1 (cont.) Tan 25.40 15.24 m 50 5

M71C-1000-580-WT 1 (cont.) White 25.40 15.24 m 50 5

M71C-1000-580-YL 1 (cont.) Yellow 25.40 15.24 m 50 5

M71C-1000-422 1 (cont.) White 25.40 15.24 m 50 5

M71C-1000-430 1 (cont.) Clear 25.40 15.24 m 50 5

M71C-1000-483 1 (cont.) White 25.40 15.24 m 50 5

M71C-1900-422 1 (cont.) White 48.26 15.24 m 50 9

M71C-1900-430 1 (cont.) Clear 48.26 15.24 m 50 9

M71C-1900-483 1 (cont.) White 48.26 15.24 m 50 9

M71C-2000-580-BK 1 (cont.) Black 50.80 15.24 m 50 8

M71C-2000-580-BL 1 (cont.) Blue 50.80 15.24 m 50 8

M71C-2000-580-BR 1 (cont.) Brown 50.80 15.24 m 50 8

M71C-2000-580-CL 1 (cont.) Clear 50.80 15.24 m 50 8

M71C-2000-580-GD 1 (cont.) Gold 50.80 15.24 m 50 8

M71C-2000-580-GN 1 (cont.) Green 50.80 15.24 m 50 8

M71C-2000-580-GY 1 (cont.) Grey 50.80 15.24 m 50 8

M71C-2000-580-LB 1 (cont.) Light Blue 50.80 15.24 m 50 8

M71C-2000-580-OC 1 (cont.) Ochre 50.80 15.24 m 50 8

M71C-2000-580-OR 1 (cont.) Orange 50.80 15.24 m 50 8

M71C-2000-580-PK 1 (cont.) Pink 50.80 15.24 m 50 8

M71C-2000-580-PL 1 (cont.) Purple 50.80 15.24 m 50 8

M71C-2000-580-RD 1 (cont.) Red 50.80 15.24 m 50 8

M71C-2000-580-SB 1 (cont.) Sky Blue 50.80 15.24 m 50 8

M71C-2000-580-TN 1 (cont.) Tan 50.80 15.24 m 50 8

M71C-2000-580-WT 1 (cont.) White 50.80 15.24 m 50 8

M71C-2000-580-YL 1 (cont.) Yellow 50.80 15.24 m 50 8

Labels Per Roll

Colour Width

A (mm)

Height B (mm)

Max. Characters per line for 7 points

Max. Lines of Text for 7 points

Surface

Suitability

Pre-Printed Labels

• B-423 Permanent Glossy Polyester

• B-428 Permanent Metallised Polyester

Order Reference Labels Per Roll Colours Width A (mm) Height B (mm) Pre- Printed Legend Surface Suitability

M71-30-423-TEST 250 Green on White 38.10 19.05 Tested

M71-30-428-CALI 250 Green on Silver 38.10 19.05 Calibration

M71-35-428-PROP 250 Black on Silver 41.40 19.05 Property Tag

Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.

Wrap Around Labels

• B-498 Vinyl cloth: repositionable rubber based adhesive

• B-499 Nylon Cloth: permanent adhesive, pliable for rough

and smooth surfaces.

Wire and Cable Marking

Diagram Order

Reference

9 AWG Based on Type of Wire – Max Wire Diam. 3.03 mm

M71-7-498 500 12.70 12.70 3.03 9 11 5

M71-7-499 500 12.70 12.70 3.03 9 11 5

M71-81-499 750 48.26 6.35 10.00 9 46 10

M71-84-499 500 22.86 12.70 6.00 9 22 2

6 AWG Based on Type of Wire – Max Wire Diam. 4.55 mm

M71-10-498 750 6.35 19.05 4.55 6 5 3

M71-11-498 500 12.70 19.05 4.55 6 11 8

BM71-11-498 5000 12.70 19.05 4.55 6 11 8

M71-11-499 500 12.70 19.05 4.55 6 11 8

BM71-11-499 5000 12.70 19.05 4.55 6 11 8

3 AWG Based on Type of Wire – Max Wire Diam. 6.06 mm

M71-16-498 500 9.53 25.40 6.06 3 8 10

M71-16-499 500 9.53 25.40 6.06 3 8 10

M71-17-498 500 25.40 12.70 6.06 3 24 5

M71-18-498 250 19.05 25.40 6.06 3 18 10

M71-18-499 250 19.05 25.40 6.06 3 18 10

BM71-18-498 2500 19.05 25.40 6.06 3 18 10

M71-19-498 250 25.40 25.40 6.06 3 24 10

BM71-19-498 2500 25.40 25.40 6.06 3 24 10

M71-19-499 250 25.40 25.40 6.06 3 24 10

M71-78-499 250 48.26 25.40 10.00 3 46 10

0 AWG Based on Type of Wire – Max Wire Diam. 9.10 mm

M71-28-499 750 38.10 6.35 9.10 0 5 16

M71-29-498 500 38.10 12.70 9.10 0 11 16

BM71-29-498 5000 12.70 38.10 9.10 0 11 16

M71-29-499 500 12.70 38.10 9.10 0 11 16

M71-30-498 250 19.05 38.10 9.10 0 18 16

M71-30-499 250 19.05 38.10 9.10 0 18 16

M71-31-498 250 25.40 38.10 9.10 0 24 16

M71-31-499 250 25.40 38.10 9.10 0 24 16

M71-32-498 250 38.10 38.10 9.10 0 37 16

0000 AWG Based on Type of Wire – Max Wire Diam. 15.16 mm

M71-21-498 100 25.40 63.50 15.6 0000 24 23

M71-21-499 100 25.40 63.50 15.6 0000 24 23

0000 AWG Based on Type of Wire – Max Wire Diam. 24.26 mm

M71-33-498 100 38.10 101.60 24.26 0000 37 16

Labels Per Roll

Label Width A (mm)

Label Height B (mm)

Max. Wire Diameter (mm)

Approx. Wire Gauge*

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Order references beginning with “B” indicate bulk rolls.*Based on National Electric Code insulation measurement of THHN Wire.

www.bradyeurope.com 16

www.bradyeurope.com

Wire and Cable Marking

Self-Laminating Labels

• B-427 Vinyl: resistant to water, oil, solvents and abrasion.

• B-642 Tedlar

self-extinguishing

: excellent abrasion and smudge resistance,

Diagram Order

Reference

10 to 0 AWG Based on Type of Wire – Maximum Wire Diam 10.00

M71-104-427 250 White 38.10 25.40 9.53 3.00 8.00 10 to 0 37 3

10 to 4 AWG Based on Type of Wire – Maximum Wire Diam 5.00

BM71-17-427 5000 White 12.70 25.40 9.53 3.00 5.00 10 to 4 11 3

M71-17-427 500 White 12.70 25.40 9.53 3.00 5.00 10 to 4 11 3

BM71-18-427 2500 White 19.05 25.40 9.53 3.00 5.00 10 to 4 18 3

M71-18-427 250 White 19.05 25.40 9.53 3.00 5.00 10 to 4 18 3

BM71-19-427 2500 White 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3

M71-19-427 250 White 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3

M71-19-427-YL 250 Yellow 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3

M71-19-642 250 White 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3

M71-96-427 250 White 25.40 19.05 9.53 3.00 5.00 10 to 4 24 3

10 to 10 AWG Based on Type of Wire – Maximum Wire Diam 3.00

M71-10-427 750 White 6.35 19.05 9.53 3.00 3.00 10 to 10 5 3

BM71-11-427 5000 White 12.70 19.05 9.53 3.00 3.00 10 to 10 11 3

M71-11-427 500 White 12.70 19.05 9.53 3.00 3.00 10 to 10 11 3

7 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 12.00

BM71-107-427 1000 White 50.80 38.10 12.70 4.00 12.00 7 to 0000 46 5

M71-107-427 100 White 50.80 38.10 12.70 4.00 12.00 7 to 0000 46 5

7 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 10.00

M71-88-427 250 White 44.45 38.10 12.70 4.00 10.00 7 to 0000 40 5

7 to 0 AWG Based on Type of Wire – Maximum Wire Diam 8.00

M71-28-427 750 White 6.35 38.10 12.70 4.00 8.00 7 to 0 5 5

BM71-29-427 5000 White 12.70 38.10 12.70 4.00 8.00 7 to 0 11 5

M71-29-427 500 White 12.70 38.10 12.70 4.00 8.00 7 to 0 11 5

BM71-30-427 2500 White 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5

M71-30-427 250 White 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5

M71-30-427-BL 250 Blue 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5

M71-30-427-PL 250 Purple 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5

M71-30-427-RD 250 Red 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5

BM71-31-427 2500 White 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5

M71-31-427 250 White 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5

M71-31-427-GN 250 Green 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5

M71-31-427-RD 250 Red 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5

M71-31-427-YL 250 Yellow 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5

M71-31-642 250 White 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5

BM71-32-427 1000 White 38.10 38.10 12.70 4.00 8.00 7 to 0 37 5

M71-32-427 250 White 38.10 38.10 12.70 4.00 8.00 7 to 0 37 5

M71-32-427-YL 250 Yellow 38.10 38.10 12.70 4.00 8.00 7 to 0 37 5

7 to 4 AWG Based on Type of Wire – Maximum Wire Diam 5.00

M71-103-427 250 White 25.40 31.75 12.70 4.00 5.00 7 to 4 24 5

Labels Per Roll

Colour Label

Width A (mm)

Label Height B (mm)

Write-on Height C (mm)

Min. Wire Diameter (mm)

Max. Wire Diameter (mm)

Approx. Wire Gauge*

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

*Based on National Electric Code insulation measurement of THHN Wire. Continued on next page >>Order references beginning with “B” indicate bulk rolls.

Self-Laminating Labels (continued)

• B-427 Vinyl: resistant to water, oil, solvents and abrasion.

• B-642 Tedlar

self-extinguishing

: excellent abrasion and smudge resistance,

Wire and Cable Marking

Diagram Order

Reference

3 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 14.00

BM71-21-427 1000 White 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8

M71-21-427 100 White 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8

M71-21-427-YL 100 Yellow 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8

M71-21-642 100 White 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8

1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 24.00

BM71-23-427 1000 White 25.40 101.60 25.40 8.00 24.00 1 to 0000 24 10

M71-23-427 100 White 25.40 101.60 25.40 8.00 24.00 1 to 0000 24 10

BM71-33-427 500 White 38.10 101.60 25.40 8.00 24.00 1 to 0000 37 10

M71-33-427 100 White 38.10 101.60 25.40 8.00 24.00 1 to 0000 37 10

M71-33-427-YL 100 Yellow 38.10 101.60 25.40 8.00 24.00 1 to 0000 37 10

1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 17.00

BM71-34-427 500 White 38.10 152.40 38.10 8.00 17.00 1 to 0000 37 16

M71-66-427 100 White 49.23 80.01 25.40 8.00 17.00 1 to 0000 46 10

1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 36.00

M71-34-427 50 White 38.10 152.40 38.10 12.00 36.00 1 to 0000 37 16

1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 20.00

BM71-109-427 500 White 38.10 101.60 38.10 12.00 20.00 1 to 0000 37 16

M71-109-427 100 White 38.10 101.60 38.10 12.00 20.00 1 to 0000 37 16

1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 17.00

BM71-64-427 1000 White 25.40 85.73 28.58 9.00 17.00 1 to 0000 24 12

M71-64-427 100 White 25.40 85.73 28.58 9.00 17.00 1 to 0000 24 12

Labels Per Roll

Colour Label

Width A (mm)

Label Height B (mm)

Write-on Height C (mm)

Min. Wire Diameter (mm)

Max. Wire Diameter (mm)

Approx. Wire Gauge*

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

*Based on National Electric Code insulation measurement of THHN Wire. Order references beginning with “B” indicate bulk rolls.

Applying Self-laminating Labels

Apply the printed area to your wire.

Wrap the clear area around the wire, covering the printed area.

Once applied the clear laminate will protect your legend for years to come.

www.bradyeurope.com 18

www.bradyeurope.com

Wire and Cable Marking

PermaSleeve™ Heat-Shrink Sleeve Markers

• B-342 Polyoleﬁn: 3:1 Shrink ratio, self-extinguishing,

meets requirements of SAE AMS-DTL-23053/5 Class 1, SAE-AS-81531, MIL-STD-202 method 215K, is UL224 recognised, CSA acceptance pending

• B-341 Polyoleﬁn: 2:1 Shrink ratio, same properties as B-342

Diagram Order

Reference

Sleeves Per Roll

Colour Sleeve

Width A (mm)

Sleeve Height B (mm)

Min. Wire Diameter (mm)

Max. Wire Diameter (mm)

Approx. Wire Gauge*

3:1 SHRINK RATIO

25.78mm marker width

M71-94-1-342 100 White 25.78 4.62 0.58 2.03 28 to 18 22 1 BM71-94-1-342 2500 White 25.78 4.62 0.58 2.03 28 to 18 22 1 M71-94-1-342YL 100 Yellow 25.78 4.62 0.58 2.03 28 to 18 22 1 BM71-94-1-342YL 2500 Yellow 25.78 4.62 0.58 2.03 28 to 18 22 1 M71-125-1-342 100 White 25.78 5.97 1.17 2.79 22 to 16 22 1 BM71-125-1-342 1000 White 25.78 5.97 1.17 2.79 22 to 16 22 1 M71-125-1-342YL 100 Yellow 25.78 5.97 1.17 2.79 22 to 16 22 1 M71-187-1-342 100 White 25.78 8.51 1.57 3.81 18 to 12 22 2 BM71-187-1-342 1000 White 25.78 8.51 1.57 3.81 18 to 12 22 2 M71-187-1-342YL 100 Yellow 25.78 8.51 1.57 3.81 18 to 12 22 2 BM71-187-1-342YL 1000 Yellow 25.78 8.51 1.57 3.81 18 to 12 22 2 M71-250-1-342 100 White 25.78 11.15 2.39 5.46 16 to 10 22 3 BM71-250-1-342 1000 White 25.78 11.15 2.39 5.46 16 to 10 22 3 M71-250-1-342YL 100 Yellow 25.78 11.15 2.39 5.46 16 to 10 22 3 M71-375-1-342 100 White 25.78 16.38 3.18 8.13 12 to 6 22 5 BM71-375-1-342 1000 White 25.78 16.38 3.18 8.13 12 to 6 22 5 M71-375-1-342YL 100 Yellow 25.78 16.38 3.18 8.13 12 to 6 22 5 M71-500-1-342 100 White 25.78 21.62 4.75 11.43 8 to 1 22 7 BM71-500-1-342 1000 White 25.78 21.62 4.75 11.43 8 to 1 22 7 M71-500-1-342YL 100 Yellow 25.78 21.62 4.75 11.43 8 to 1 22 7 BM71-500-1-342YL 1000 Yellow 25.78 21.62 4.75 11.43 8 to 1 22 7

44.83mm marker width

M71-94-175-342 100 White 44.83 4.62 0.58 2.03 28 to 18 41 1 BM71-94-175-342 2500 White 44.83 4.62 0.58 2.03 28 to 18 41 1 M71-94-175-342YL 100 Yellow 44.83 4.62 0.58 2.03 28 to 18 41 1 BM71-94-175-342YL 2500 Yellow 44.83 4.62 0.58 2.03 28 to 18 41 1 M71-125-175-342 100 White 44.83 5.97 1.17 2.79 22 to 16 41 1 BM71-125-175-342 1000 White 44.83 5.97 1.17 2.79 22 to 16 41 1 M71-125-175-342YL 100 Yellow 44.83 5.97 1.17 2.79 22 to 16 41 1 BM71-125-175-342YL 1000 Yellow 44.83 5.97 1.17 2.79 22 to 16 41 1 M71-187-175-342 100 White 44.83 8.51 1.57 3.81 18 to 12 41 3 BM71-187-175-342 1000 White 44.83 8.51 1.57 3.81 18 to 12 41 3 M71-187-175-342YL 100 Yellow 44.83 8.51 1.57 3.81 18 to 12 41 3 BM71-187-175-342YL 1000 Yellow 44.83 8.51 1.57 3.81 18 to 12 41 3 M71-250-175-342 100 White 44.83 11.15 2.39 5.46 16 to 10 41 3 BM71-250-175-342 1000 White 44.83 11.15 2.39 5.46 16 to 10 41 3 M71-250-175-342YL 100 Yellow 44.83 11.15 2.39 5.46 16 to 10 41 3 BM71-250-175-342YL 1000 Yellow 44.83 11.15 2.39 5.46 16 to 10 41 3 M71-375-175-342 100 White 44.83 16.38 3.18 8.13 12 to 6 41 5 BM71-375-175-342 1000 White 44.83 16.38 3.18 8.13 12 to 6 41 5 M71-375-175-342YL 100 Yellow 44.83 16.38 3.18 8.13 12 to 6 41 5 M71-500-175-342 100 White 44.83 21.62 4.75 11.43 8 to 1 41 7 BM71-500-175-342 1000 White 44.83 21.62 4.75 11.43 8 to 1 41 7 M71-500-175-342YL 100 Yellow 44.83 21.62 4.75 11.43 8 to 1 41 7 BM71-500-175-342YL 1000 Yellow 44.83 21.62 4.75 11.43 8 to 1 41 7

Continuous marker

BM71C-125-342 1 (cont.) White 15.24 m 5.97 1.17 2.79 22 to 16 NA NA BM71C-187-342 1 (cont.) White 15.24 m 8.51 1.57 3.81 18 to 12 NA NA BM71C-250-342 1 (cont.) White 15.24 m 11.15 2.39 5.46 16 to 10 NA NA BM71C-375-342 1 (cont.) White 15.24 m 16.38 3.18 8.13 12 to 6 NA NA BM71C-500-342 1 (cont.) White 15.24 m 21.62 4.75 11.43 8 to 1 NA NA

2:1 SHRINK RATIO

25.78mm marker width

M71-1000-1-341 50 White 25,78 42,16 11.43 24.13 1 to 500 22 16 M71-1000-1-341YL 50 Yellow 25,78 42,16 11.43 24.13 1 to 500 22 16

44.83mm marker width

M71-1000-175-341 50 White 44,83 42,16 11.43 24.13 1 to 500 41 16 BM71-1000-175-341 500 White 44,83 42,16 11.43 24.13 1 to 500 41 16 M71-1000-175-341YL 50 Yellow 44,83 42,16 11.43 24.13 1 to 500 41 16

Continuous marker

BM71C-1000-341 1 (cont.) White 15.24 m 42,16 11.43 24.13 1 to 500 NA NA

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

*Based on National Electric Code insulation measurement of THHN Wire. Order references beginning with “B” indicate bulk rolls.

Rigid Durasleeve Inserts

• B-7696: Rigid vinyl tag

Wire and Cable Marking

Order Reference

BM71D-3-7696 2500 White 16.00 4.40 AC*-L16 11 1

BM71D-3-7696-YL 5000 Yellow 16.00 4.40 AC*-L16 11 1

BM71D-5-7696 2500 White 30.00 4.40 AC*-L30 21 1

BM71D-5-7696-YL 5000 Yellow 30.00 4.40 AC*-L30 21 1

Order references beginning with “B” indicate bulk rolls.

Tags Per Roll

Colour Width

(mm)

Height (mm)

Carrier Max. Characters

per line for 5 Points

Ademark Tag Carrier

Ademark carriers are produced in transparent PVC. The special shape of the carrier means that it can be adapted to cables of various diameters. This means that there are only seven different sizes of carriers which cater for cables with external diameters from 1.3 mm up to 24 mm.

• Temperature range: -40° to 60°C

• Material: PVC

• Self extinguishing: UL94VO

Order Reference Carriers per pack Length (mm) Wire O.D. (mm)

AC-0-L16 2000 16.00 mm 1.30 - 2.00

AC-1-L16 2000 16.00 mm 1.80 - 2.50

AC-2-L16 2000 16.00 mm 2.50 - 4.00

AC-3-L16 1000 16.00 mm 4.00 - 6.50

AC-4-L16 1000 16.00 mm 6.00 - 10.00

AC-5-L16 750 16.00 mm 9.00 - 15.00

AC-6-L16 500 16.00 mm 15.00 - 24.00

Order Reference Carriers per pack Length (mm) Wire O.D. (mm)

AC-0-L30 2000 30.00 mm 1.30 - 2.00

AC-1-L30 2000 30.00 mm 1.80 - 2.50

AC-2-L30 2000 30.00 mm 2.50 - 4.00

AC-3-L30 1000 30.00 mm 4.00 - 6.50

AC-4-L30 1000 30.00 mm 6.00 - 10.00

AC-5-L30 750 30.00 mm 9.00 - 15.00

AC-6-L30 500 30.00 mm 15.00 - 24.00

Max. Lines of Text for 5 Points

Rapido™

• B-7599: Yellow coated polyetheylene tag suitable for durable terminated wire marking

for electrical devices and ﬁbre installations.

Order Reference

BM71R-1-7599-YL 2500 Yellow 22.90 5.20 11 1

BM71R-2-7599-YL 2500 Yellow 23.00 5.20 8 1

BM71R-3-7599-YL 2500 Yellow 25.00 5.70 7 2

BM71R-4-7599-YL 2500 Yellow 26.00 7.00 7 2

BM71R-5-7599-YL 2500 Yellow 41.00 11.00 17 3

Order references beginning with “B” indicate bulk rolls.

Tags Per Roll

Colour Width

A (mm)

Height B (mm)

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

www.bradyeurope.com 20

www.bradyeurope.com

Wire and Cable Marking

Heatex™ Cable Markers

• B-7643: Zero halogen polyether polyurethane tag material

Order Reference

BM71H-1-7643-WT 250 White 60.00 10.00 40 4

BM71H-1-7643-YL 250 Yellow 60.00 10.00 40 4

BM71H-2-7643-WT 250 White 75.00 10.00 51 4

BM71H-2-7643-YL 250 Yellow 75.00 10.00 51 4

BM71H-3-7643-WT 250 White 75.00 25.00 51 10

BM71H-3-7643-YL 250 Yellow 75.00 25.00 51 10

Order references beginning with “B” indicate bulk rolls.

Tags Per Roll

Colour Width

A (mm)

Height B (mm)

Max. Characters per line for 5 Points

Tear Resistant Cable Markers

• B-109 Polyethylene: Provides extreme tear resistance

and excellent cold-weather performance; meets requirements of DIN VDE 0472/parts 815

• B-145 Polyethylene: Tear resistant and 2-side printable,

is UL94 V2 recognised

Max. Lines of Text for 5 Points

Diagram Order

Reference

M71-12-109 100 White 19.05 76.20 17.78 x 52.07 45 6 Cable Bundles; Power & Ground Cables

BM71-12-109 1,000 White 19.05 76.20 17.78 x 52.07 45 6 Cable Bundles

M71-36-109 250 White 44.45 28.58 44.45 x 28.57 40 15 Power & Ground Cables

BM71-111-145-GY 1,000 Grey 19.25 30.63 19.25 x 30.63 16 14 145C Tag; Power & Ground Cables

BM71-110-145-GY 1,000 Grey 44.45 25.40 44.45 x 25.40 28 20 145P Tag; Power & Ground Cables

Order references beginning with “B” indicate bulk rolls.

Tags Per Roll

Colour Width

Coloured Nylon Ties

Perfect for colour coded applications.

Size: 200 x 4 mm Material: Nylon Packing: 100 pieces

Order Reference

229955 White

229956 Blue

229957 Red

229958 Orange

Colour

A (mm)

Order Reference

229959 Yellow

229960 Green

229961 Violet

229962 Black

Height B (mm)

Write-on Area W x H (mm)

Colour

Max. Characters per line for 5 Points

BL Blue, for horizontal cable terminations

BR Brown, for campus backbone cable terminations

GR Green, network connections

Grey, for backbone cable between intermediate cross-connect and

telecommunications cabinet

OR Orange, central ofﬁce termination

PL Purple, major switching and data equipment terminations

RD Red, for all key telephone equipment terminations

YL Yellow, for auxiliary, maintenance, alarms, security, etc.

Max. Lines of Text for 5 Points

Cable Type

Electrical Component Marking

Terminal Block Repositionable Markers

• B-498: Repositionable vinyl cloth

Order Reference

M71C-240-498 6.10 9.14 4

M71C-318-498 8.08 9.14 7

BM71C-318-498 8.08 91.44 7

M71C-375-498 9.53 9.14 7

BM71C-375-498 9.53 91.44 7

Order references beginning with “B” indicate bulk rolls.

Order references with “C” (e.g. M71C) indicate continuous.

EPREP Labels – Engraved Plate Replacement Labels

• B-7593: Polyethylene Foam Laminate

BRADY EPREP labels are innovative labels speciﬁcally designed to replace engraved and plotted plates for identiﬁcation of electrical components, electrical cabinets, push buttons, patch panels etc.

Label Width A (mm)

Label Length B (m) (continuous)

Max. Characters per line for 5 Points

TEXT 1 TEXT 2 TEXT 3

. . .

100 101 102

. . .

Roll

Diagram Order

Reference

M71EP-1-7593-SL 250 Silver 27.00 8.00 22 3 Roll

M71EP-1-7593-WT 250 White 27.00 8.00 22 3 Roll

M71EP-2-7593-SL 250 Silver 27.00 12.50 22 5 Roll

M71EP-2-7593-WT 250 White 27.00 12.50 22 5 Roll

M71EP-3-7593-SL 150 Silver 27.00 15.00 22 6 Roll

M71EP-3-7593-WT 150 White 27.00 15.00 22 6 Roll

M71EP-4-7593-SL 150 Silver 27.00 18.00 22 7 Roll

M71EP-4-7593-WT 150 White 27.00 18.00 22 7 Roll

M71EP-5-7593-BK 100 Black 30.00 40.00 24.00 24 5 Fanfolded

M71EP-5-7593-GN 100 Green 30.00 40.00 24.00 24 5 Fanfolded

M71EP-5-7593-RD 100 Black 30.00 40.00 24.00 24 5 Fanfolded

M71EP-5-7593-SL 100 Silver 30.00 40.00 24.00 24 5 Fanfolded

M71EP-5-7593-WT 100 White 30.00 40.00 24.00 24 5 Fanfolded

M71EP-5-7593-YL 100 Yellow 30.00 40.00 24.00 24 5 Fanfolded

M71EP-6-7593-BK 100 Black 45.00 15.00 36 6 Fanfolded

M71EP-6-7593-RD 100 Black 45.00 15.00 36 6 Fanfolded

M71EP-6-7593-YL 100 Yellow 45.00 15.00 36 6 Fanfolded

BM71E-6-7593-SL 500 Silver 45.00 15.00 36 6 Bulk roll

BM71E-6-7593-WT 500 White 45.00 15.00 36 6 Bulk roll

M71EP-7-7593-SL 100 Silver 35.00 18.00 28 7 Roll

M71EP-7-7593-WT 100 White 35.00 18.00 28 7 Roll

M71EP-7-7593-YL 100 Yellow 35.00 18.00 28 7 Roll

M71EP-8-7593-SL 125 Silver 48.00 19.00 39 7 Roll

M71EP-8-7593-WT 125 White 48.00 19.00 39 7 Roll

Order references beginning with “B” indicate bulk rolls.

Tags Per Roll

Colour Width

A (mm)

Height B (mm)

Diameter D (mm)

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Format

Fanfolded

Bulk roll

Nylon Cloth Labels

• B-499: White nylon cloth with high adhesion

Order Reference

M71-82-499 500 9.52 7 2

M71-83-499 250 12.70 9 3

Tags Per Roll

Label Diameter C (mm)

Max. Characters per line for 5 Points

www.bradyeurope.com 22

Max. Lines of Text for 5 Points

www.bradyeurope.com

Datacom Labels

Self-Laminating Labels

• B-427 Vinyl: excellent abrasion and

smudge resistance.

Diagram Order

Reference

BM71-19-427 2500 25.40 25.40 9.53 2 Pair Fibre 24 3

M71-19-427 250 25.40 25.40 9.53 2 Pair Fibre 24 3

M71-19-427-YL 250 25.40 25.40 9.53 2 Pair Fibre 24 3

BM71-21-427 1000 25.40 63.50 19.05 4 Pair STP, 25 Pair Copper, 4-12 Pair Fibre 24 8

M71-21-427 100 25.40 63.50 19.05 4 Pair STP, 25 Pair Copper, 4-12 Pair Fibre 24 8

M71-21-427-YL 100 25.40 63.50 19.05 4 Pair STP, 25 Pair Copper, 4-12 Pair Fibre 24 8

BM71-23-427 1000 25.40 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 24 10

M71-23-427 100 25.40 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 24 10

BM71-29-427 5000 12.70 38.10 12.70 CAT 5, 4 Pair UTP 11 5

M71-29-427 500 12.70 38.10 12.70 CAT 5, 4 Pair UTP 11 5

BM71-30-427 2500 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5

M71-30-427 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5

M71-30-427-BL 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5

M71-30-427-PL 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5

M71-30-427-RD 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5

BM71-31-427 2500 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, RG-6 Coax, RG-59 Coax 24 5

M71-31-427 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5

M71-31-427-GN 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5

M71-31-427-RD 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5

M71-31-427-YL 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5

BM71-32-427 1000 38.10 38.10 12.70 CAT 5, 4 Pair UTP 37 5

M71-32-427 250 38.10 38.10 12.70 CAT 5, 4 Pair UTP 37 5

M71-32-427-YL 250 38.10 38.10 12.70 CAT 5, 4 Pair UTP 37 5

BM71-33-427 500 38.10 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 10

M71-33-427 100 38.10 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 10

M71-33-427-YL 100 38.10 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 10

BM71-34-427 500 38.10 152.40 38.10 100 Pair Copper, 36 Pair Fibre 37 16

M71-34-427 50 38.10 152.40 38.10 100 Pair Copper 37 16

BM71-64-427 1000 25.40 85.73 28.58 Fibre/Coax 24 12

M71-64-427 100 25.40 85.73 28.58 Fibre/Coax 24 12

M71-66-427 100 49.23 80.01 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 46 10

M71-88-427 250 44.45 38.10 12.70 CAT 5, 4 Pair UTP 40 5

M71-103-427 250 25.40 31.75 12.70 CAT 5, 4 Pair UTP 24 5

M71-104-427 250 38.10 25.40 9.53 2 Pair Fibre, Single/Multi-Mode 37 3

BM71-107-427 1000 50.80 38.10 12.70 CAT 5, 4 Pair UTP 46 5

M71-107-427 100 50.80 38.10 12.70 CAT 5, 4 Pair UTP 46 5

BM71-109-427 500 38.10 101.60 38.10 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 16

M71-109-427 100 38.10 101.60 38.10 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 16

Labels Per Roll

Label Width A (mm)

Label Height B (mm)

Write-on Height C (mm)

Application Max. Characters

per line for 5 Points

Max. Lines of Text for 5 Points

Order references beginning with “B” indicate bulk rolls.

Datacom Labels

TubeSleeve Carriers

Brady TubeSleeve Carriers are the ideal complement to self-laminating labels, where the cables are thin and available space for text is small. Apply the tubesleeve to the cable and then apply the self-lam. The limited available space is increased signiﬁcantly, giving you the possibility of printing more text.

Order Reference Sleeves Per Pack Min. Cable Diameter (mm) Max. Cable Diameter (mm) Recomended Label

BTS1426 1000 1.00 4.00 M71-31-427

BTS4626 1000 4.00 6.00 M71-31-427

BTS6826 400 6.00 8.00 M71-23-423

BTS81226 250 8.00 12.00 M71-23-423

Fibre Optic Labels/Flags

• B-425 Polypropylene

Diagram Order

Reference

M71FT-1-425 250 30.00 20.00 Fibre Strand 24 8

M71FP-1-425 250 30.00 20.00 Fibre Strand 24 8

M71FP-2-425 250 44.45 25.40 Fibre Strand 35 10

Labels Per Roll

Label Width A (mm)

Label Height B (mm)

Application Max. Characters

Power and Ground Cable Tags

• B-109 Polyethylene: Extreme tear resistance

• B-145 Polyethylene: Tear resistant and 2-side printable

• B145FR Polyethylene: Tear resistant, 2-side printable

and ﬂame retardant

Diagram Order

Reference

BM71-12-109 1000 White 19.05 76.20 17.78 x 52.07 45 6 Communications Cables, Power & Ground Cables

M71-12-109 100 White 19.05 76.20 17.78 x 52.07 45 6 Communications Cables

M71-36-109 250 White 44.45 28.58 44.45 x 28.57 40 15 Cable Labels

BM71-111-145-GY 1000 Grey 30.63 19.25 19.25 x 30.63 16 14 Cable Labels

M71-111-145FR-GY 100 Grey 30.63 19.25 19.25 x 30.63 16 14 Cable Labels

M71-111-145-GY 100 Grey 30.63 19.25 19.25 x 30.63 16 14 Cable Labels

M71-110-145FR-GY 100 Grey 44.45 25.40 44.45 x 25.40 28 20 Cable Labels

BM71-110-145-GY 1000 Grey 44.45 25.40 44.45 x 25.40 28 20 Cable Labels

M71-110-145-GY 100 Grey 44.45 25.40 44.45 x 25.40 28 20 Cable Labels

Tags Per Roll

Colour Width

A (mm)

Height B (mm)

Write-on Area W x H (mm)

per line for 5 Points

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Application

Order references beginning with “B” indicate bulk rolls.

www.bradyeurope.com 24

www.bradyeurope.com

Datacom Labels

Workstation Labels

• B-412 Polypropylene

• B-422 Permanent Glossy Polyester

• B-430 Clear Polyester

Diagram Order

Reference

M71-16-430 500 25.40 9.53 Location ID, 1-4 Outlet Faceplates 24 3

M71-17-430 500 25.40 12.70 Location ID, 1-4 Outlet Faceplates 24 5

BM71-40-412 5000 49.23 9.53 Desi-Strip Inserts 40 3

M71-40-412 750 49.23 9.53 Desi-Strip Inserts 40 3

M71-45-422 500 38.10 9.53 Location ID 37 3

M71-45-430 500 38.10 9.53 Location ID 37 3

M71-68-430 750 6.10 3.81 Siemon Faceplates 4 2

M71-71-430 750 8.89 5.08 Siemon Faceplates 7 2

Order references beginning with “B” indicate bulk rolls.

Labels Per Roll

Label Width A (mm)

Patch Panel Identiﬁcation

• B-412 Polypropylene Tag

• B-422 Permanent Glossy Polyester

• B-423 Permanent Polyester

• B-430 Permanent Clear Polyester

Label Height B (mm)

Application Max. Characters

per line for 5 Points

Max. Lines of Text for 5 Points

Diagram Order

Reference

M71-10-423 750 19.05 6.35 Patch Panel - ID Port, Voice/Data Identification 18 2

M71C-230-412 1 (cont.) 5.84 15.24 m Broadcast Patch Bay Strips 50 4

M71C-375-412 1 (cont.) 9.53 15.24 m Broadcast Patch Bay Strips 50 3

M71C-375-422 1 (cont.) 9.53 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 3

M71C-375-430 1 (cont.) 9.53 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 3

M71C-475-412 1 (cont.) 12.70 15.24 m Broadcast Patch Bay Strips, Racks& Panels 50 4

M71C-500-412 1 (cont.) 12.70 15.24 m Broadcast Patch Bay Strips 50 5

M71C-500-422 1 (cont.) 12.70 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 5

M71C-500-430 1 (cont.) 12.70 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 5

M71C-785-412 1 (cont.) 19.94 15.24 m Broadcast Patch Bay Strips 50 8

Tags Per Roll

Label Width A (mm)

Label Height B (mm)

Application Max. Characters

For more information on our materials or to help you choose, visit www.bradyeurope.com

per line for 5 Points

Max. Lines of Text for 5 Points

Racks, Panels and General Identiﬁcation

• B-412 Polypropylene Tag

• B-422 Permanent Glossy Polyester

• B-423 Permanent Polyester

• B-430 Permanent Clear Polyester

Datacom Labels

Diagram Order

Reference

BM71-20-422 1000 50.80 25.40 Racks, Panels & General ID 46 10

M71-20-483 100 50.80 25.40 Racks, Panels & General ID 46 10

M71-23-483 100 101.60 25.40 Racks, Panels & General ID 50 9

M71-30-483 250 38.10 19.05 Racks, Panels & General ID 37 8

M71-31-483 250 38.10 25.40 Racks, Panels & General ID 37 10

M71-37-422 100 76.20 48.26 Racks, Panels & General ID 50 20

M71-37-483 100 76.20 48.26 Racks, Panels & General ID 50 20

M71-38-483 100 101.60 48.26 Racks, Panels & General ID 50 20

M71-61-483 100 12.70 50.80 Racks, Panels & General ID 50 5

M71-65-483 250 34.93 25.40 Racks, Panels & General ID 35 10

M71C-230-412 1 (cont.) 5.84 15.24 m Racks, Panels & General ID 50 2

M71C-375-412 1 (cont.) 9.53 15.24 m Racks, Panels & General ID 50 3

M71C-375-422 1 (cont.) 9.53 15.24 m Closet Hardware Labels, Racks, Panels & General ID 50 3

M71C-375-430 1 (cont.) 9.53 15.24 m Closet Hardware Labels, Racks, Panels & General ID 50 3

M71C-500-412 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5

M71C-500-422 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5

M71C-500-430 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5

M71C-500-483 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5

M71C-785-412 1 (cont.) 19.94 15.24 m Racks, Panels & General ID 50 8

M71C-1000-422 1 (cont.) 25.40 15.24 m Racks, Panels & General ID 50 10

M71C-1000-430 1 (cont.) 25.40 15.24 m Racks, Panels & General ID 50 5

M71C-1000-483 1 (cont.) 25.40 15.24 m Racks, Panels & General ID 50 10

M71C-1900-483 1 (cont.) 48.26 15.24 m Racks, Panels & General ID 50 10

Labels Per Roll

Label Width A (mm)

Label Height B (mm)

Application Max. Characters

per line for 5 Points

Max. Lines of Text for 5 Points

Order references beginning with “B” indicate bulk rolls.

Bulk Packaging

Bulk labels are designed for the BMP™71 Label Printer as a cost-effective solution for high volume labelling needs.

Order references beginning with “B” indicate bulk rolls.

www.bradyeurope.com 26

www.bradyeurope.com

Circuit Board and Component Indentiﬁcation Labels

Material to Circuit Board Process Cross Reference Guide

Through Hole Technology Surface Mount Technology (SMT)

Brady material number (B-number)

B-426 B-457 B-478 B-479

B-422 B-423 B-428 B-437

B-459 B-473 B-498*

Top Bottom Top or Bottom

YES YES YES YES

YES*

NO NO

*In extreme high temperatures, testing of these materials is recommended.

Polyimides

• B-426 High Temperature Amber Polyimide:

Withstands extremely high temperatures

• B-457 High Temperature White Polyimide:

good contrast and smear resistance

• B-477 Static Dissipative Polyimide:

Static dissipative adhesive and liner

• B-478 Static Dissipative Polyimide:

Static dissipative adhesive and liner; low proﬁle

Order Reference

M71-2-477 100 6.35 50.80 41 2 23* M71-3-457 500 9.53 9.53 7 3 1 M71-4-478 500 10.16 10.16 8 4 2 M71-9-426 750 16.51 5.08 13 2 5* M71-9-478 750 16.51 5.08 13 2 5* M71-10-457 750 19.05 6.35 15 2 6* M71-13-426 750 22.86 6.35 18 2 8* M71-14-477 750 25.40 4.75 20 1 10 M71-16-426 500 25.40 9.53 20 4 10 M71-16-457 500 25.40 9.53 20 4 10 M71-17-426 500 25.40 12.70 20 5 10 M71-25-478 750 31.75 6.35 26 2 13* M71-28-426 750 38.10 6.35 31 2 17*

*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1

Labels Per Roll

Width A (mm)

Height B (mm)

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Max. Bar Code Characters**

Through Hole Technology

SMT Top/Bottom

After Process

YES

After ProcessTop Bottom

Tedlar

• B-437 Flame-Retardant White Tedlar

Order Reference

M71-10-437 750 19.05 6.35 15 2 6* M71-15-437 750 25.40 6.99 20 2 10* M71-29-437 500 38.10 12.70 31 5 17

Tedlar® is a registered trademark of DuPont.

Labels Per Roll

Yes, this material will work with this application. No, this material does not work with this application. In extreme high temperatures, testing of these materials is recommended.

Width A (mm)

Height B (mm)

Max. Characters per line for 5 Points

*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1

Max. Lines of Text for 5 Points

Max. Bar Code Characters**

Through Hole Technology

SMT Top/Bottom

After ProcessTop Bottom

Vinyl Cloth

• B-498 White Vinyl Cloth:

with repositionable adhesive

Circuit Board and Component Indentiﬁcation Labels

Order Reference

M71-7-498 500 12.70 12.70 10 5 3 M71-10-498 750 19.05 6.35 15 2 6* M71-16-498 500 25.40 9.53 20 4 10 M71-17-498 500 25.40 12.70 20 5 10 BM71-29-498 5000 38.10 12.70 31 5 17 M71-29-498 500 38.10 12.70 31 5 17 M71-32-498 250 38.10 38.10 37 16 17

Labels Per Roll

Width A (mm)

Height B (mm)

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Max. Bar Code Characters**

*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1

Polyester

• B-423, B-459 Permanent White Polyester:

• B-428 Permanent Metallised Polyester:

• B-473 Static Dissipative Polyester:

Static dissipative adhesive and liner

Order Reference

M71-1-423 750 6.35 6.35 5 2 0 M71-2-423 100 50.80 6.35 41 2 23* M71-3-423 500 9.53 9.53 7 3 0 M71-4-423 500 10.16 10.16 8 4 0 M71-5-423 750 12.70 5.08 11 1 3 M71-6-423 750 12.70 6.99 11 2 3 M71-6-473 750 12.70 6.99 11 2 3 M71-7-423 500 12.70 12.70 10 5 3 BM71-7-423 5000 12.70 12.70 10 5 3 M71-9-423 750 16.51 5.08 13 2 5* M71-9-473 750 16.51 5.08 13 2 5* M71-10-423 750 19.05 6.35 15 2 6* M71-10-473 750 19.05 6.35 15 2 6* M71-13-423 750 22.86 6.35 18 2 8* M71-14-423 750 25.40 4.75 20 1 10 M71-15-423 750 25.40 6.99 20 2 10 M71-15-428 750 25.40 6.99 20 2 10 M71-16-423 500 25.40 9.53 20 4 10 BM71-16-423 5000 25.40 9.53 20 4 10 M71-16-473 500 25.40 9.53 20 4 10 M71-17-423 500 25.40 12.70 20 5 10 BM71-17-423 5000 25.40 12.70 20 5 10 M71-17-428 500 25.40 12.70 20 5 10 M71-17-473 500 25.40 12.70 20 5 10 M71-19-423 250 25.40 25.40 20 10 10 BM71-19-423 2500 25.40 25.40 20 10 10 M71-20-423 100 50.80 25.40 41 10 23 BM71-20-423 1000 50.80 25.40 41 10 23 M71-20-459 100 50.80 25.40 41 10 23 M71-25-423 750 31.75 6.35 26 2 13* M71-26-423 100 69.85 31.75 57 12 32 M71-27-423 750 38.10 3.18 31 1 17 M71-28-423 750 38.10 6.35 31 2 17 M71-28-473 750 38.10 6.35 31 2 17 M71-29-423 500 38.10 12.70 31 5 17 BM71-29-423 5000 38.10 12.70 31 5 17 M71-29-459 500 38.10 12.70 31 5 17 M71-30-459 250 38.10 19.05 31 8 17 M71-37-423 100 76.20 48.26 60 19 35 M71-38-423 100 101.60 48.26 82 19 47 M71C-500-423 1 (cont.) 12.70 15.24 m 50 5

Labels Per Roll

Width A (mm)

Height B (mm)

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1

Max. Bar Code Characters**

Through Hole Technology

SMT Top/Bottom

After ProcessTop Bottom

Order references beginning with “B” indicate bulk rolls.

Through Hole Technology

SMT Top/Bottom

After ProcessTop Bottom

Order references beginning with “B” indicate bulk rolls.

Yes, this material will work with this application. No, this material does not work with this application. In extreme high temperatures, testing of these materials is recommended.

www.bradyeurope.com 28

www.bradyeurope.com

Security Identiﬁcation Labels

Tamper Indicating Labels

• B-351 Tamper-Resistant White Vinyl

• B-352 Tamper-Resistant Metallised Vinyl

• B-530 Tamper-Resistant White Vinyl

Diagram Order

Reference

M71-17-351 500 White 25.40 12.70 20 5

M71-17-352 500 Silver 25.40 12.70 20 5

M71-20-351 100 White 50.80 25.40 46 10

M71-20-352 100 Silver 50.80 25.40 46 10

M71-31-351 250 White 38.10 25.40 37 10

M71-31-352 250 Silver 38.10 25.40 37 10

M71-37-351 100 White 76.20 48.26 50 20

M71-37-352 100 Silver 76.20 48.26 50 20

M71C-500-530 1 (cont.) White 12.70 15.24 m 50 2

M71C-1000-530 1 (cont.) White 25.40 15.24 m 50 5

M71C-2000-530 1 (cont.) White 50.80 15.24 m 50 10

Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.

Labels Per Roll

Colour Width

A (mm)

Height B (mm)

Max. Characters per line for 5 Points

Max. Lines of Text for 5 Points

Laboratory Identiﬁcation Labels

Surface

Suitability

Freezer

Liquid nitrogen

Self-Laminating Labels

• B-427 Vinyl: excellent abrasion and smudge resistance.

• B-461 Polyester: resistant to extreme temperatures

(-196°C to 130°C)

Diagram Order

Reference

M71-19-427 250 25.40 25.40 9.53

BM71-19-427 2500 25.40 25.40 9.53

M71-19-427-YL 250 25.40 25.40 9.53

M71-21-427 100 25.40 63.50 19.53

BM71-21-427 1000 25.40 63.50 19.53

M71-21-427-YL 100 25.40 63.50 19.53

M71-30-427-AW 250 38.10 19.05 –

BM71-30-427 2500 19.05 38.10 12.70

BM71-75-461 1000 66.68 25.40 25.40

AW = All White (no transparent area) – YL = Yellow

Labels Per Roll

Label Width A (mm)

Label Height B (mm)

Write-On Height C (mm)

Environment Application Vial/Tube size

Order references beginning with “B” indicate bulk rolls.

Straws 0.25 mL Straw

Straws 0.2 5mL Straw

Straws 0.25 mL Straw

Straws 0.5 ml Straw

Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

Cryo Vial 1.0 - 8.0 ml Vial/Tube

Autoclave

Hot water (100°C) bath

Vinyl & Nylon Cloth Labels

• B-498 Vinyl Cloth:

repositionable adhesive

• B-499 Nylon Cloth:

high adhesion

Laboratory Identiﬁcation

Diagram Order

Reference

M71-11-498 500 12.70 19.05 - Centrifuge, Eppendorf, PCR Tube 0.5 - 0.7ml Tube

BM71-11-498 5000 12.70 19.05 - Centrifuge, Eppendor f, PCR Tube 0.5 - 0.7ml Tube

M71-11-499 500 12.70 19.05 -

M71-16-498 500 9.53 25.40 - Centrifuge, Eppendorf, PCR Tube 0.5 - 0.7ml Tube

M71-16-499 500 9.53 25.40 -

M71-17-498 500 25.40 12.70 - Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

M71-29-498 500 38.10 12.70 -

BM71-29-498 5000 12.70 38.10 -

M71-29-499 500 12.70 38.10 -

M71-30-499 250 19.05 38.10 -

M71-31-498 250 25.40 38.10 - Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

M71-31-499 250 25.40 38.10 -

M71-78-499 250 48.26 25.40 -

M71-81-499 750 48.26 6.35 -

M71-82-499 500 - - 9.53

M71-83-499 500 - - 9.53

M71-84-499 500 22.86 12.70 -

M71-98-499 500 25.40 9.53 9.53

Labels Per Roll

Label Width A (mm)

Label Height B (mm)

Label Diameter C (mm)

Environment Application Vial/Tube size

Centrifuge, Eppendorf, PCR Tube, Cryo Vial 0.5 - 0.7ml Tube – 0.6ml Vial/Tube

Centrifuge, Eppendorf, PCR Tube 0.5 - 0.7ml Tube

Conical Tube, Cryo Vial, Bottles, Petri Dish, Deep Well Plate

Cryo Vial, Conical Tube, Bottles, Petri Dish, Deep Well Plate

Conical Tube, Cryo Vial, Bottles, Petri Dish, Deep Well Plate

Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

Well Plate

Vial Top 0.6 - 1.5ml Vial/Tube

Vial Top 1.0 - 2.0ml Vial/Tube

Centrifuge, Cryo Vial, Eppendorf, PCR Tube

Centrifuge, Cryo Vial, Eppendorf, PCR Tube, Vial, Vial Top

12.0 - 24.0ml Vial/Tube

50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

12.0 - 24.0ml Vial/Tube

50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

12.0 - 24.0ml Vial/Tube

50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

0.5 - 0.7ml Tube – 1.5 - 2.0ml Tube

0.6 ml Vial/Tube – 1.0 - 8.0ml Vial/Tube

0.5 - 0.7ml Tube – 1.0 - 8.0ml Vial/Tube

0.6 - 1.5ml Vial/Tube

Order references beginning with “B” indicate bulk rolls.

Polyester Labels

• B-423 Glossy White Polyester

• B-430 Glossy Clear Polyester

• B-488 Matt White Polyester

Diagram Order

Reference

M71-2-423 100 50.80 6.35

M71-7-423 500 12.70 12.70

BM71-7-423 5000 12.70 12.70

M71-14-423 750 25.40 4.75

M71-15-423 750 25.40 6.99

M71-17-423 500 25.40 12.70

M71-17-430 500 25.40 12.70

M71-20-423 100 50.80 25.40

BM71-20-423 1000 50.80 25.40

M71-22-423 100 76.20 25.40

M71-31-423 250 38.10 25.40

M71-80-488 250 19.05 22.86

M71-81-488 750 48.26 6.35

M71-97-488 250 22.86 22.86

M71C-500-430 1 (cont.) 12.70 15.24M

Order references beginning with “B” indicate bulk rolls.

Labels Per Roll

Label Width A (mm)

Label Height B (mm)

Environment Application Vial/Tube size

Well Plate 

Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

Slide

Well Plate

Slide

Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate

www.bradyeurope.com 30

Brady Corporation

“Our mission is to provide innovative identiﬁcation solutions which improve safety, security, productivity and performance for customers worldwide.”

Brady manufactures and markets:

• products for identiﬁcation and safety applications such as signs and markers, and the printers and software to produce them

• products for wire identiﬁcation, including labelling materials and tools for wire and cable marking in the electrical and telecommunication markets

• high-performance identiﬁcation products, including labels and signs that remain legible and highly adhesive even in harsh environments

Company Overview

Brady was founded in 1914 in Eau Claire, Wisconsin, as W.H. Brady Co., and renamed Brady Corporation in 1998. The company began selling products internationally in 1947. In 1984, Brady went public, with stock trading on the Nasdaq Stock Market, and in 1999, moved trading of its stock to the New York Stock Exchange, where it trades under the symbol BRC. The company’s global headquarters is in Milwaukee, Wisconsin.

• precision die-cut parts, including custom die-cut and slit materials for use in cellular phones, pagers, computer disk drives and automotive electronic components

Operations – Some facts:

• 7000 employees around the world

• Operations in 26 countries

• Distribution in more than 100 countries through more than 4,400 distributor partners

BRADY Belgium

Industriepark C/3 Lindestraat 20 9240 Zele Tel. +32 (0) 52 45 78 11 Fax +32 (0) 52 45 78 12

BRADY Denmark

Svendborgvej 39B 5260 Odense S Tel. +45 66 14 44 00 Fax +45 66 14 44 50

BRADY France

Parc EUROCIT 45, avenue de l’Europe 59436 Roncq Cedex Tel. +33 (0) 3 20 01 08 70 Fax +33 (0) 3 20 01 08 76

BRADY Germany

Büchenhöfe 2 63329 Egelsbach Tel. +49 (0) 6103 7598 660 Fax +49 (0) 6103 7598 670

BRADY Hungary

Puskás Tivadar u. 4. 2040 Budaörs Tel. +36 23 500 275 Fax +36 23 500 276

BRADY Italy

Via Pitagora 18 20128 Milano Tel. +39 02 26 00 00 22 Fax +39 02 25 75 351

BRADY Middle-East

PO BOX 18015 Jebel Ali, Dubai, UAE Tel. +971 4881 2524 Fax +971 4881 3183

BRADY Norway

Breivika Industrivei 9 6018 Ålesund Tel. +47 70 19 10 30 Fax +47 70 19 05 67

Brady Slovakia

Na Pántoch 18 831 06 Bratislava Tel. +421 2 3300 4800 Fax +421 2 3300 4801

BRADY Spain

Carretera de Barcelona, 88 Esc B Entresuelo 9C 08302 Mataro Tel. +34 900 902 993 Fax +34 900 902 994

Brady Sweden

Vallgatan 5 170 67 Solna Tel. +46 (0) 8 590 057 30 Fax +46 (0) 8 590 818 68

BRADY Turkey

Selvili Sok. No: 3/4

4.Levent Istanbul 34330 Tel. +90 212 264 02 20 / 264 02 21 Fax +90 212 270 83 19

BRADY United Kingdom

Wildmere Industrial Estate Banbury, Oxon – OX16 3JU Tel. +44 (0) 1295 228 288 Fax +44 (0) 1295 228 100

Your distributor

BRADY WORLDWIDE

Africa . . . . . . . . . . . . . . . . . . . . . . 971-4881-2524

Australia . . . . . . . . . . . . . . . . . . . 612-8717-6300

Brazil . . . . . . . . . . . . . . . . . . . . 55-11-3686-4720

Canada . . . . . . . . . . . . . . . . . . . . 1-800-263-6179

China (Beijing) . . . . . . . . . . . . . 86-10-6788-7799

China (Shanghai) . . . . . . . . . . . 86-21-6886-3666

China (Wuxi) . . . . . . . . . . . . . . 86-510-528-2222

Hong Kong . . . . . . . . . . . . . . . . . . 852-2359-3149

Japan . . . . . . . . . . . . . . . . . . . . . 81-45-461-3600

Korea . . . . . . . . . . . . . . . . . . . . . 82-31-451-6600

Latin America. . . . . . . . . . . . . . . 1-414-540-5560

Malaysia . . . . . . . . . . . . . . . . . . . 60-4-646-2700

Mexico . . . . . . . . . . . . . . . . . . . . . . 525-399-6963

New-Zealand . . . . . . . . . . . . . . . 61-2-8717-2200

Philippines . . . . . . . . . . . . . . . . . . 63-2-658-2077

Singapore . . . . . . . . . . . . . . . . . . . 65-6477-7261

Taiwan . . . . . . . . . . . . . . . . . . . . 886-3-327-7788

Thailand . . . . . . . . . . . . . . . . . . . . 66-2-793-9200

U.S.A. . . . . . . . . . . . . . . . . . . . . . 1-800-537-8791

EUR-M-71 0-EN

www.bradyeurope.com

Datasheet BMP 71 Datasheet (BRADY)

Specifications and Main Features

Frequently Asked Questions

User Manual