
Surge Protection Capacitor
BIORIPHASO/TF AT 0.03/36.3
Technical Specification
ICAR S.p.A
Via Isonzo 10, 20052 Monza (MI)
.
Surge Protection Capacitor
BIORIPHASO/TF AT 0.03/36.3
0.03 µF – 36.3 kV - 50/60 Hz
TECHNICAL DATA AND GENERAL CHARACTERISTICS
Rated Capacitance µF 0.03
Capacitance Tolerance % -5...+10
Rated Voltage kV 36.3
Service Voltage kV
Rated Frequency Hz 50/60
Rated Current at 50/60 Hz A 0.34/0.41
Insulation Level/B.I.L. kV 70/170
Temperature Category °C -25/B
Service INDOOR/OUTDOOR
Altitude m <1000
Tangent of loss angle (tan δ)
Discharge Resistor NO
According to standards IEC 60358 / CEI 33-2
Dielectric Polypropylene Film
Electrodes/ Aluminium Foil
Impregnant (no PCB) BIOIL®
Case Material Stainless Steel
Case colour Grey Ral 7031
Bushing n° 1
Material Ceramic
Colour Brown
Creepage Distance mm 570
Terminal M14 Stud
Max Torque Nm 25
Approximate weight kg 15
__________________________________________________________________________
Technical Specification N° TS1360 Rev.B of 07/11/2011 page 1 of 2
Issued CC4 GP Approved DTAT GB CC4\TS\TS1360 Rev.B.doc
36.3/√3
< 0.2⋅10-3

Surge Protection Capacitor
BIORIPHASO/TF AT 0.03/36.3
Technical Specification
ICAR S.p.A
Via Isonzo 10, 20052 Monza (MI)
Technical Description
The Capacitors of our BIORIPHASO/TF AT series are designed and built in accordance with the most advanced
technology, which give them long life and high reliability.
The dielectric consists of layers of the best quality of polypropylene film.
The electrodes consist of pure aluminium foil.
The impregnant, called
substances or presents any ecological problems.
It has high dielectric strength, low losses, and is very stable at high temperature.
The housing of Bioriphaso/TF AT capacitors is made of stainless steel sheeting, welded together without the
further addition of metal. This housing ensures that the dielectric will be well preserved and not deteriorate through
pollution over a period of time.
The housing is protected by a synthetic paint, suitable for outdoor use, with high mechanical resistance and good
resistance to pollution, industrial fumes and salt fog. The blue-grey colour of the paint makes for efficient heat
transmission.
The bushings are made of brown porcelain. Before mounting all bushings are tested for mechanical strength. They
are suitable for outdoor installation in an environment polluted with industrial fumes.
BIOIL
®
, is a biodegradable and no-toxic dielectric fluid, it does not contain chlorinated
ROUTINE TEST
External inspection and dimensional check
Voltage Test between Terminals at 70 kV - 50 Hz for 60 s , room temperature.
Capacitance and Tangent of Loss Angle Measurement at 36.3/√3 kV – 50 Hz , room
temperature.
Partial discharge test
Sealing Test at 80 °C for 20 h.
DRAWING
4K5706 Rev.C BIORIPHASO/TF AT 0.03/36.3
.
__________________________________________________________________________
Technical Specification N° TS1360 Rev.B of 07/11/2011 page 2 of 2
Issued CC4 GP Approved DTAT GB CC4\TS\TS1360 Rev.B.doc