Datasheet BD 505U Specification

Page 1
BD505
DMR handheld radio
Getting started easily
The BD series of radios is a new device class for getting started in digital technology (DMR). The BD505 oers functions comparable to simple an­alog radios in the same price class, but with the advantages of digital transmission technology.
Excellent performance
Robust and durable
The BD505 was developed and tested in compli­ance with the military standard MIL-810 G. The dust and water-proof construction as per IP54 ensures reliability in dierent environments.
Clear voice
Use of digital coding and correction technology makes it possible to transmit voices without any interference – even over large distances.
Simple operation
Ergonomically optimized volume keys ensure easy operation, even while wearing gloves.
www.hytera-mobilfunk.com
Page 2
Technical Data BD505
General data
Frequency range VHF: 136 – 174 MHz
Supported operating modes  DMR Tier II
Number of channels 48
Number of zones 3
Channel spacing 12.5 kHz (analog)
Operating voltage 7.2 V
Battery service life (5/5/90 duty cycle) analog
digital
Standard battery 1500 mAh (lithium-ion battery)
Frequency stability ± 0.5 ppm
Antenna impedance 50Ω
Dimensions (H × W × D) 108 × 54 × 29 mm
Weight (with antenna and standard battery)
UHF: 400 - 470 MHz
in acc. with ETSI TS 102 361-1/2/3
 Simulcast  XPT Digital Trunking  Analog
25 kHz (digital)
approx. 12 hours at 1500 mAh; approx. 16 hours at 2000 mAh; approx. 16 hours at 1500 mAh; approx. 22 hours at 2000 mAh;
2000 mAh (lithium-ion battery)
approx. 220 g
Environmental conditions
Operating temperature range -30 °C to +60 °C
Storage temperature range -40 °C to +85 °C
ESD IEC 61000-4-2 (Level 4),
Protection against dust and mois­ture
Shock and vibration resistance MIL-STD-810 G
Relative humidity MIL-STD-810 G
± 8 kV (contact), ± 15 kV (air)
IP54
Transmitter
Transmitting power VHF: 1 / 5 W
UHF: 1 / 4 W
Modulation 11K0F3E at 12.5 kHz
16K0F3E at 25 kHz
4FSK digital modulation 12.5 kHz (data only): 7K60FXD
12.5 kHz (data and voice): 7K60FXW
Interfering signals and harmonics - 36 dBm (< 1 GHz)
- 30 dBm (> 1 GHz)
Modulation limiting ± 2.5 kHz at 12.5 kHz
± 5.0 kHz at 25 kHz
Noise cancellation 40 dB at 12.5 kHz
45 dB at 25 kHz
Adjacent channel selectivity 60 dB at 12.5 kHz
70 dB at 25 kHz
Audio sensitivity +1 dB to -3 dB
Audio distortion ≤5 %
Digital vocoder type AMBE +2™
Digital protocol ETSI-TS102 361-1,2,3
Receiver
Sensitivity (analog) 0.22 μV (typical) (12 dB SINAD)
0.4 μV (20 dB SINAD)
Sensitivity (digital) 0.22 μV / BER 5%
Adjacent channel selectivity (ETSI) 60 dB at 12.5 kHz
70 dB at 25 kHz
Intermodulation 65 dB at 12.5/25 kHz
Spurious response rejection (ETSI) 70 dB at 12.5/25 kHz
Signal-noise ratio (S/N) 40 dB at 12.5 kHz
45 dB at 25 kHz
Nominal audio power output 0.5 W
Audio distortion ≤ 3 %
Audio sensitivity +1 dB to -3 dB
Conducted spurious emission < -57 dBm
Hytera Mobilfunk GmbH
Address: Fritz-Hahne-Strasse 7, 31848 Bad Münder, Germany Telephone: + 49 (0)5042 / 998-0 Fax: + 49 (0)5042 / 998-105 e-mail: info@hytera.de | www.hytera-mobilfunk.com
All technical information was determined at the factory and in accordance with the corre­sponding standards. Subject to change on the basis of continuous development.
Hytera Mobilfunk GmbH reserves the right to modify the product design and the specications. Hytera Mobilfunk GmbH does not accept any liability for printing errors. All technical data subject to change without notice.
German and European export regulations also apply. German and European export regulations also apply.
ACCESSNET® and any derivatives thereof are registered trademarks of Hytera Mobilfunk GmbH. © 2018 Hytera Mobilfunk GmbH. All rights reserved.
are registered trademarks of Hytera Co. Ltd.
SGS certicate DE11/81829313
Ref. no.: 90BD505_TD_ENG_v01
Loading...