Page 1
AT-937 AT-937A
B
Page 2
Mode
Power
Voltage
Power
Consumption
Temperature
Range
Tip Leakage
Voltage
Standard Tip
AT-93 7
230VAC/50Hz
110VAC/60Hz
50 W
200~480℃
<2mV
900M
AT-93 7A
230VAC/50Hz
110VAC/60Hz
65 W
200~480℃
<2mV
900M
Page 3
5. Auto standby function
When the soldering not in use and put the
soldering iron on the iron holder, it will auto
standby after 10 minutes, heater is heating up
to 200 ℃, pick up the soldering iron and back to
normal working mode.(P.S. AT937 without the
functions)
6. Auto sleep function
In auto standby mode, the soldering station will
auto sleep after 20 minutes, heater is heating up
to 100 ℃, pick up the soldering iron and back to
normal working mode.(P.S. It will auto sleep when
not in use machine doesn't operate and turn to
sleep mode, AT937 without the functions)
7.The LED indicator light display status
when this device is power on
1. The LED indicator light is steady on: Means this
device is heating up
2. The LED indicator light is off: Means this device
is not heating up(it may mean temperture
overshoot, unsuccessfully connecting soldering
iron handlle or broken heating core)
3. Breathing state(The LED indicator light turn into
lighter from dark then turn into darker, loop):
Means this device is under constant temperture.
4. The L ED in dic ator light is flash: Mean s thi s
devi ce en ter i nto s lee p or st and by st atu s
(Onl y AT937 A have this function).
Page 4
Problem 5.
Loading...