Digital Attenuator, 31 dB, 5-Bit,
TTL Driver DC-2.0 GHz
V 6.00
AT65-0263
Features
n Attenuation: 1.0 dB Steps to 31 dB
n Low DC Power Consumption
n Plastic SOW, Wide Body, SMT Package
n Integral TTL Driver
n 50 ohm Impedance
n Test Boards are Available
n Tape and Reel Packaging Available
Description
M/A-COM's AT65-0263 is a GaAs FET 5-bit digital
attenuator with integral TTL driver. Step size is 1.0 dB
providing 31 dB total attenuation range. This device is in a
SOW-16 plastic surface mount package. The AT65-0263 is
ideally suited for use where accuracy, fast speed, very low
power consumption and low costs are required.
SOW-16
Package outline conforms to JEDEC standard MS-013AA.
Electrical Specifications: TA = 25°C
Parameter Test Conditions Frequency Units Min Typical Max
Insertion Loss — DC-1.0 GHz
Attenuation
Accuracy
VSWR Full Range DC-2.0 GHz Ratio — 1.5:1 1.8:1
Switching Speed
1 dB Compression —
Input IP
Vcc
-Vee
Logic “0” Sink Current is 20 µA max. — V 0.0 - 0.8
Logic “1” Source Current is 20 µA max. — V 2.0 - 5.0
Icc Vcc min to max, Logic “0” or “1” — mA — 0.2 6
-Iee -Vee min to max, Logic “0” or “1” — mA — -0.2 -1
1. Decoupling capacitors (.01 µF) are required on power supply lines.
1
3
Individual Bits 1-2-4-8-16
Any Combination of bits 3 - 29 dB
Any Combination of bits 30 - 31 dB
50% Cntl to 90%/10% RF
10% to 90% or 90% to 10%
—
Two-tone inputs up to +5 dBm 50 MHz
—
—
DC-2.0 GHz
DC-2.0 GHz
DC-2.0 GHz
DC-2.0 GHz
—
—
50 MHz
0.5-2.0 GHz
0.5-2.0 GHz
—
—
dB
dB
dB
dB
dB
nS
nS
dBm
dBm — —
dB
dB
V
V
—
—
—
—
—
—
—
—
—
4.75
-8.0
2.6
2.8
—
—
—
75
20
+21
+29
+35
+48
5.0
-5.0
±(.5 +5% of atten setting)
±(.5 +5% of atten setting)
±(.7 +7% of atten setting)
2.9
3.2
150
50
—
—
—
—
5.25
-4.75
Page 2
Digital Attenuator, 31 dB, 5-Bit, TTL Driver, DC - 2.0 GHz