Digital Attenuator, 31.5 dB, 6-Bit,
TTL Driver, DC - 2.0 GHz
V 5.00
AT65-0107
Features
n Attenuation: 0.5 dB Steps to 31.5 dB
n Low DC Power Consumption
n Plastic SOIC, Wide Body, SMT Package
n Integral TTL Driver
n 50 ohm Impedance
n Test Boards are Available
n Tape and Reel Packaging Available
Description
M/A-COM's AT65-0107 is a GaAs FET 6-bit digital
attenuator with a 0.5 dB minimum step size and a 31.5 dB
total attenuation range. This device is in a SOIC-24 wide
body, plastic surface mount package. The AT65-0107 is
ideally suited for use where accuracy, fast speed, very low
power consumption and low costs are required.
SOW-24
Package outline conforms to JEDEC standard MS-013AD.
Electrical Specifications: TA = 25°C
Parameter Test Conditions Frequency Units Min Typ Max
Insertion Loss —
Attenuation Accuracy Any Bit or Combination of Bits DC - 2.0 GHz dB — — ±(.3 +4% of atten.)
VSWR Full Range DC - 2.0 GHz Ratio — 1.8:1 2:1
Switching Speed 1 50% Cntl to 90%/10% RF
10% to 90% or 90% to 10%
1 dB Compression —
Input IP3 Two-tone inputs up to +5 dBm 50 MHz
Vcc
-Vee
Logic “0” Sink Current is 20 µA max. — V 0.0 — 0.8
Logic “1” Source Current is 20 µA max. — V 2.0 — 5.0
Icc Vcc min to max, Logic “0” or “1” — mA — 0.2 6
-Iee -Vee min to max, Logic “0” or “1” — mA — -0.2 -1
1. Decoupling capacitors (.01 µF) are required on Power Supply lines.
—
—
—
—
DC - 1.0 GHz
DC - 2.0 GHz
—
—
50 MHz
0.5 - 2.0 GHz
0.5-2.0 GHz
—
—
dB
dB
nS
nS
dBm
dBm
dB
dB
V
V
—
—
—
—
—
—
—
—
4.75
-8.0
3.1
3.6
75
20
+21
+29
+35
+48
5.0
-5.0
3.6
4.2
150
50
—
—
—
—
5.25
-4.75
Page 2
Digital Attenuator, 31.5 dB, 6-Bit, TTL Driver, DC - 2.0 GHz