Datasheet APAN3112, APAN3124 Specification

1 Form A 5A

slim power relay

complies with IEC61010

reinforced insulation

PA-N RELAYS

New

RoHS compliant

Protective construction: Sealed type
(RTIII)

FEATURES

1. High density mounting

5mm(W) × 20mm(L) × 12.5mm(H)

.197inch(W) × .787inch(L) ×
.492inch(H)

2. Low operating power

Nominal operating power: 110mW

3. Complies with IEC61010 reinforced
insulation standards

4. Long Insulation distance

• Clearance: 5.29mm .208inch

Creepage distance: 5.35mm .211inch
(Between contact and coil)

• 3,000 V breakdown voltage and

6,000V surge breakdown voltage

5. Complies with Standard for
Hazardous Location (ANSI/ISA

12.12.01)

ORDERING INFORMATION

APAN 3 1

Contact arrangement
3: 1 Form A (Bifurcated)

Terminals and Nominal operating power
1: PC board terminal (110 mW)

Nominal coil voltage (DC)
03: 3V, 4H: 4.5V, 05: 5V, 06: 6V, 09: 9V, 12: 12V, 18: 18V, 24: 24V

Note: Certified by UL/C-UL and TÜV

TYPICAL APPLICATIONS

1. Output relays for programmable
controllers and temperature
controllers

2. Industrial equipment, office
equipment

3. Measuring devices and test
equipment

TYPES

Contact arrangement Nominal coil voltage Part No.

1 Form A

Standard packing: Tube: 25 pcs.; Case: 1,000 pcs.

* Terminal sockets available.

3 V DC APAN3103

4.5 V DC APAN314H
5 V DC APAN3105
6 V DC APAN3106
9 V DC APAN3109
12 V DC APAN3112
18 V DC APAN3118
24 V DC APAN3124

–1–

ASCTB368E 201604-T

PA-N (APAN3)

RATING

1. Coil data

Nominal coil

voltage

3 V DC

4.5 V DC 24.4 mA 184 Ω
5 V DC 22.0 mA 227 Ω
6 V DC 18.3 mA 327 Ω
9 V DC 12.2 mA 736 Ω
12 V DC 9.2 mA 1,309 Ω
18 V DC 6.1 mA 2,945 Ω
24 V DC 4.6 mA 5,236 Ω

Note: *Pulse drive (JIS C 5442)

Pick-up voltage

(at 20°C 68°F)

70%V or less of

nominal voltage*

(Initial)

Drop-out voltage

(at 20°C 68°F)

5%V or more of

nominal voltage*

(Initial)

2. Specifications

Characteristics Item Specifications

Arrangement 1 Form A (Bifurcated)

Contact

Rating

Electrical
characteristics

Mechanical
characteristics

Expected life

Conditions

Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the

actual load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage

conditions in NOTES.
*4. Operating frequency of 5 A 250 V AC is 6 times/min. (ON : OFF = 1 s : 9 s)

Contact resistance (Initial) Max. 30 mΩ (By voltage drop 6 V DC 1A)
Contact material AgNi type + Au
Nominal switching capacity (resistive load) 5 A 250 V AC, 5 A 30 V DC
Max. switching power (resistive load) 1,250 VA, 150 W
Max. switching voltage 250 V (AC), 110 V (DC) (0.4 A)
Max. switching current 5 A (AC, DC)
Nominal operating power 110 mW
Min. switching capacity (Reference value)*
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.

Breakdown voltage
(Initial)

Surge breakdown voltage (Initial)
(Between contacts and coil)*

Operate time (at nominal voltage) (at 20°C 68°F)
(Initial)

Release time (at nominal voltage) (at 20°C 68°F)
(Initial)

Shock resistance

Vibration resistance

Mechanical Min. 2×107 (at 180 times/min.)

Electrical

Conditions for operation, transport and storage*

Max. operating speed 20 times/min. (at nominal switching capacity)*

Unit weight Approx. 3 g .15 oz

Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA.)
Between contact and coil 3,000 Vrms for 1min. (Detection current: 10mA.)

2

Functional Min. 147 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Functional 10 to 55 Hz at double amplitude of 2.5 mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 3.5 mm

Nominal operating

current

[±10%] (at 20°C 68°F)

36.7 mA 82 Ω

1

1 mA 5 V DC

6,000 V

Max. 10 ms (excluding contact bounce time)

Max. 5 ms (excluding contact bounce time and without diode)

Min. 10
Min. 5×10

Ambient temperature: –40°C to 90°C –40°F to 194°F;

3

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

Coil resistance

[±10%] (at 20°C 68°F)

5

(3 A 250 V AC, 30 V DC, resistive load)

4

(5 A 250 V AC, 30 V DC, resistive load) (at 20 times/min.)*

Nominal operating

power

110mW

4

Max. applied voltage

(at 20°C 68°F)

120%V of

nominal voltage

4

–2–

ASCTB368E 201604-T

REFERENCE DATA

1. Max. switching capacity 2. Life curve 3. Coil temperature rise

10

5

DC resistive load

1

Contact current, A

0.4

0.1

AC resistive load

Contact voltage, V

4

100

50
40
30

AC250V cos =0.4

20

10

No. of operations, ×10

5

1000100101

1

0.1 0.5 1 3 5 10

AC250V resistive load

DC30V resistive load

DC30V L/R=7ms

φ

Switching capacity, A

Tested sample: APAN3124, 6 pcs.
Measured portion: Inside the coil
Ambient temperature: 20°C 68°F, 90°C 194°F (No
contact current)

40

35

30

25

20

Temperature rise, °C

15

10

5

0

90 100 110 120 130 140 150

Coil applied voltage, %V

PA-N (APAN3)

5A (20°C)
3A (20°C)
0A (20°C)

0A (90°C)

4. Operate & release time

Tested sample: APAN3124, 20 pcs.
Measured direction: Upright

10.0

9.0

8.0

7.0

6.0

5.0

4.0

3.0

Operate & release time, ms

2.0

1.0

0.0
70 80 90 100 130120110

Operate time

Release time

Coil applied voltage, %V

DIMENSIONS (mm inch)

CAD Data

1.3

.051

8.8

.346

6

.236

Max.
Ave.
Min.

Max.
Ave.
Min.

4.8

5. Ambient temperature characteristics

Tested sample: APAN3124, 6 pcs.

30

Drop-out voltage

20

Rate of

change, %

10

0

-10

-20

-30

Pick-up voltage

Ambient
temperature, °C

100806040200-20-40-60

6. Malfunctional shock

Tested sample: APAN3124, 6 pcs.

Y

1000

800

X

Z’

600
400

200

0

Y’

Deenergized
condition

Energized
condition

Z

X

X’

The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/

.189

5.0

.197

External dimensions

0.5

1.2

.047

2.9

.114

.020

12.5

.492

(12.8 Max.)

(.504 Max.)

3.5

.138

2.54

.100 .043.200.400

0.5 0.8

.020 .031

20

.787

1.15.0810.16

General tolerance: ±0.3 ±.012

1.2

.047

0.25

.010

PC board pattern (Bottom view)

1.2 dia.

1 dia.

.039 dia.

2.54 10.16 5.08

.100 .400 .200

1 dia.

.039 dia.

.047 dia.

Tolerance: ±0.1 ±.004

Schematic (Bottom view)

12 5 6

Z

X’

Z’

1.2 dia.

.047 dia.

Y’

Y

–3–

Coil

COMNO

ASCTB368E 201604-T

PA-N (APAN3)

SAFETY STANDARDS

UL/C-UL (Recognized) TÜV (Certified)

File No. Contact ratings Temp. Cycles File No. Contact ratings Temp. Cycles

E43149 5 A 250 V AC Resistive

5 A 250 V AC Resistive
5 A 30 V DC General use
5 A 30V DC, 3 A 250 V AC General use
3 A 250 V AC Resistive
3 A 30 V DC General use
B300, R300 Pilot duty

40°C 104°F
90°C 194°F
40°C 104°F
90°C 194°F
40°C 104°F
40°C 104°F
40°C 104°F

5×10

10

5×10

10
10
10

—

4

B16 01 13461 348 5 A 250 V AC (cos

4

4

4

5

5

5 A 250 V AC (cos
5 A 30 V DC (0 ms)
5 A 30 V DC (0 ms)
3 A 250 V AC (cos
3 A 30 V DC (0 ms)

φ
φ

φ

=1.0)
=1.0)

=1.0)

40°C 104°F
90°C 194°F
40°C 104°F
90°C 194°F
40°C 104°F
40°C 104°F

5×10

5×10

E479891 Class I, Division 2, Groups A, B, C, D Hazardous Location

(ANSI/ISA 12.12.01-2015, CAN/CSA C22.2 No.213-15)

Insulation distance (between contact and coil)

• UL/C-UL: Clearance distance: 5.29 mm .208 inch, Creepage distance: 5.35 mm .211 inch

• TÜV: Clearance distance: 5.29 mm .208 inch, Creepage distance: 5.35 mm .211 inch

NOTES

1. For cautions for use, please read
“GENERAL APPLICATION
GUIDELINES”.

2. If it includes ripple, the ripple factor
should be less than 5%.

3. Specification values for pick-up and
drop-out voltages are for the relay
mounting with its terminals below.

Tested sample: APAN3124, 6 pcs.
Ambient temperature: 20°C 68°F
Measured direction: 6 direction

100

90

80

Pick-up voltage

70

60

50

40

Voltage, %V

30

20

10

0

Drop-out voltage

Mounting

direction

Max.
Ave.
Min.

Max.
Ave.
Min.

4. When mounting the relays within
1 mm .039 inch, please notice the
condition below.

1) Mount the relays in the same

direction.

Within 1 mm

.039 inch

2) Coil terminals (Terminal No. 1 & 2)

polarity should be arranged in the
same direction.

– .

– .

– .

+ .

– .

+ .

+ .

+ .

+ .

+ .

– .
+ .

+ .

– .

– .

– .

+ .

+ .

– .

– .

4

4

10

4

4

10

5

10

5

10

–4–

ASCTB368E 201604-T