Datasheet ALC80 series Specification

Page 1

Snap-In Aluminum Electrolytic Capacitors

ALC80, +105°C

Overview

The KEMET ALC80 High CV snap-in capacitors offer high performance and reliability in a wide range of case sizes and voltage ratings featuring high ripple currents and

long-life performance. Volumetric eciency ensures the

maximum capacitance capability in a smaller size.

Benets

• Maximum capacitance capability in a smaller size

• Long life, up to 9,000 hours at +105°C (V

• High ripple current

• Excellent surge voltage capability

• PET sleeve and Lexan disc are recognized to UL: QMTR2,

UL No. E358957 (Other options available upon request)

• Optimized designs available upon request

, IR applied)

Applications

Typical applications for the ALC80 capacitor include inverters, frequency converters, motor drives, motor control, UPS systems, smoothing, energy storage, alternative energy, charging stations, traction, demanding power supplies (SMPS), welding, and HVAC.

Part Number System

ALC80 A 392 BB 040

Series Termination Capacitance Code (µF) Size Code Rated Voltage (VDC)

Snap-In type

Aluminum Electrolytic

See Termination Table First two digits

represent signicant

gures. Third digit

species number of

zeros.

See Dimension Table 025 = 25

040 = 40 063 = 63 100 = 100 200 = 200

250 = 250 350 = 350 400 = 400 450 = 450 500 = 500

Built Into Tomorrow

Page 2

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

Rated Voltage and Ripple Current

at +105°C (hours)

Rated Voltage at +105°C

(hours)

40 < VR ≤ 160 VDC ∆ C/C < ±20%

ESR < 3X ESR Limit, IL < initial specied limit

Performance Characteristics

Item Performance Characteristics

Capacitance Range 68 – 240,000 µF

Rated Voltage 25 – 500 VDC

Operating Temperature −40 to +105°C

Storage Temperature Range −55 to +105°C

Capacitance Tolerance ±20% at 100 Hz/+20°C

D (mm)

25 6,000 10,000

Operational Lifetime

30 7,000 11,000

35 8,000 13,000

40 – 50 9,000 14,000

End of Life Requirement

Shelf Life 2,000 hours at +85°C or 30,000 hours at +40°C 0 VDC

Leakage Current

Vibration Test Specications

Standards IEC 60384–4 long life grade 40/105/56

Surge Voltage

Condition

≤ 30s Surge followed by a no load

period of 330 seconds, 1,000 cycles at +105 °C

VR > 160 VDC ∆ C/C < ±15%

I = 0.003 CV or 6,000 (µA, whichever is smaller)

C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.

Procedure Requirements

0.75 mm displacement amplitude or 10 G maximum acceleration.

D ≤ 40 mm

D > 40 mm

Vibration applied for three directions 2-hour sessions at 10 – 500 Hz. (Capacitor clamped by body)

0.35 mm displacement amplitude or 5 G maximum acceleration. Vibration applied for three directions 0.5-hour sessions at 10 – 55 Hz. (Capacitor clamped by body)

No leakage of electrolyte

or other visible damage.

Deviations in capacitance

from initial measurements

must not exceed: ∆ C/C < 5%

Voltage (VDC)

25 40 63 100 200 250 350 400 450 500

28.75 46 72.5 115 230 288 385 440 495 550

Page 3

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

BB2530

BC253530BD254035CB303040CC303545CD304050CE304555CF305060DB353050DC353560DD354065DE3545

DF3550

DG355585DH356090DL3580

115

EB403055EC403565ED404085EE4045

100

EF4050

105

EG4055

115

Note: Dimensions include sleeving

EH4060

125

EJ4070

145

EL4080

165

EM4090

180

EN40100

195

FB4530

75FC453585FD4540100

FE4545

115

FF4550

125

FG4555

135

FH4560

155

FL4580

185

FP45105

225

KB503095KC5035

115

KD5040

130

KE5045

145

KF5050

160

KG5055

180

KH5060

200

KL5080

265

KP50105

310

Note: Dimensions include sleeving

Test Method & Performance

Conditions Performance

Temperature +105°C

Tes t D uration 2,000 hours

Ripple Current Rated ripple current in specied table

Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor

Performance The following specications will be satised when the capacitor is tested at +20°C:

Capacitance Change

Equivalent Series Resistance Does not exceed 150% of the initial limit

Leakage Current Does not exceed leakage current limit

Endurance Life Test

≤ 160 V Within 15% of the initial value

> 160 V Within 10% of the initial value

Dimensions – Millimeters

Dimensions in mm

Size

Code

D L

−0/+1 ±2

Safety Vent

Construction

Base Vent

Approximate

Weight

Grams

Dimensions in mm

Size

Code

−0/+1 ±2

D L

Safety Vent

Construction

Base Vent

Side Vent

Approximate

Weight

Grams

Page 4

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

Termination

•••

•••35•••••40•••••45•••

•

•••

•

Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any

position. Dummy pins must be isolated on 4 and 5 pin styles.

Termination Tables

Code

Diameter (mm)

Termination

Code

A 2 Pin 6.3

G (D ≥ 45) 5 Pin 6.3

D 2 Pin 4.0

F 3 Pin 4.0

C 4 Pin 6.3

E 4 Pin 4.0

A D F C E G H

Termination

Style

Standard Termination Option

Other Termination Options

5 Pin 4.0

±1

Dimensions in mm

Page 5

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

2 ±0.1

4.75 ±0.1

10 ±0.1

3.3 ±0.1

Ø2.5 Minimum

+ ve

Ø2 ±0.1 Typical

30°

- ve

4 Holes Ø2 ±0.1 on a Ø22.5 PCD

+ ve

30°

- ve

5 Holes Ø2 ±0.1 on a Ø25.0 PCD

+ ve

30°

Termination Tables cont.

Style A/D

Style F

Style C/E

SIDE VIEW TERMINAL

END VIEW

PCB LAYOUT

SIDE VIEW TERMINAL

END VIEW

PCB LAYOUT

SIDE VIEW TERMINAL

END VIEW

PCB LAYOUT

Style G/H

SIDE VIEW TERMINAL

END VIEW

PCB LAYOUT

Page 6

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

Shelf Life

The capacitance, ESR, and impedance of a capacitor will not change signicantly after extended storage periods; however,

the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three

years at 40°C. See sectional specication under each product series for specic data.

Re-age (Reforming) Procedure

Apply the rated voltage to the capacitor at room temperature for a period of one hour or until the leakage current has fallen

to a steady value below the specied limit. During re-aging, a maximum charging current of twice the specied leakage

current or 5 mA (whichever is greater) is suggested.

Reliability

The reliability of a component can be dened as the probability that it will perform satisfactorily under a given set of

conditions for a given length of time.

In practice, it is impossible to predict with absolute certainty how any individual component will perform. Therefore, we

must utilize probability theory. It is also necessary to clearly dene the level of stress involved (e.g., operating voltage, ripple current, temperature, and time.) Finally, the meaning of satisfactory performance must be dened by specifying a set of

conditions, which determine the end of life of the component.

KEMET provides an online life calculator that can be used to predict hours of life for a given part number in specic

application conditions. This can be found at: https://elc.kemet.com.

End of Life Denition

Catastrophic failure: short circuit, open circuit or safety vent operation

Parametric Failure:

• Change in capacitance > ±15%

• Leakage current > initial specied limit

• ESR > 3X ESR Limit

Page 7

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

100 Hz

20°C (µF)

100 Hz

105°C (A)

10 kHz

105°C (A)

100 Hz

20°C (mΩ)

10 kHz

20°C (mΩ)

Table 1 – Ratings & Part Number Reference

Rated

VDC

Capacitance

25 10,000 BB 25 x 30 3.66 4.54 120 335 ALC80(1)103 BB0 25 25 12,000 BC 25 x 35 4.19 5.22 99 87 ALC80(1)123BC025 25 15,000 BD 25 x 40 4.73 5.81 81 71 ALC8 0(1)15 3BD02 5 25 16,000 CB 30 x 30 5.61 7.27 71 62 ALC 80(1)163CB025 25 18,000 CC 30 x 35 6.27 8.25 62 54 ALC80(1)183CC025 25 22000 CD 30 x 40 7. 05 9.17 52 45 ALC80(1)223CD025 25 24,000 CD 30 x 40 7.2 3 9.26 48 42 ALC80(1)243CD025 25 33,000 CF 30 x 50 8.63 10.78 36 31 ALC80(1)333CF025 25 27,000 DC 35 x 35 7.2 8 8.75 47 41 ALC80(1)273DC025 25 33,000 DD 35 x 40 8.19 9.78 39 34 ALC80(1)333DD025 25 39,000 DE 35 x 45 9.00 10.67 33 29 ALC80(1)393DE025 25 47,000 DF 35 x 50 9.79 11.43 28 25 ALC80(1)473DF025 25 56000 DH 35 x 60 10.93 12.70 24 21 ALC80(1)563DH025 25 30,000 EB 40 x 30 6.75 7.64 49 44 ALC80(1)303EB025 25 62,000 EF 40 x 50 10.50 11.74 25 22 ALC80(1)623EF025 25 68,000 EF 40 x 50 10.50 11.59 24 22 ALC80(1)683EF025 25 82,000 EH 40 x 60 11.8 5 13.05 20 18 ALC80(1)823EH025 25 100000 EJ 4 0 x 70 12.92 1 4.10 17 16 ALC80(1)104EJ025 25 110,000 EL 40 x 80 13.66 14.88 16 15 ALC80(1)114EL025 25 120,000 EL 40 x 80 13.78 14.87 15 14 ALC80(1)124EL025 25 150000 EN 40 x 100 14.81 15 .81 14 12 ALC80(1)154EN025 25 180,000 FP 45 x 105 18.82 20.45 10 9 ALC80(1)184FP025 25 220,000 KP 50 x 105 19.80 21.16 9 9 ALC80(1)224KP025 25 240,000 KP 50 x 105 20.06 21.2 9 9 8 ALC80(1)244KP025 40 3,900 BB 25 x 30 3.26 4.52 134 108 ALC80(1)392BB040 40 4700 BC 25 x 35 3.73 5.19 111 89 ALC80(1)472BC040 40 5600 BD 25 x 40 4 .17 5.76 94 75 ALC80(1)562BD040 40 6,200 BD 25 x 40 4.29 5.78 87 70 ALC80(1)622BD040 40 6,200 CB 30 x 30 4.91 7.22 81 64 ALC80(1)622CB040 40 6,800 CB 30 x 30 5.05 7. 25 75 60 ALC80(1)682CB040 40 8200 CC 30 x 35 5.77 8.30 62 49 ALC80(1)822CC040 40 10,000 CD 30 x 40 6.51 9.23 51 41 ALC80(1)103CD040 40 13,000 CF 30 x 50 7.67 10.68 40 32 ALC80(1)133CF040 40 12,000 DC 35 x 35 6.74 8.65 47 39 ALC80(1)123DC040 40 13,000 DD 35 x 40 7.44 9.76 43 35 ALC80(1)133DD040 40 15,000 DE 35 x 45 8.15 10.65 37 30 ALC80(1)153DE040 40 18000 DF 35 x 50 8.91 11.41 32 26 ALC80(1)183DF040 40 20,000 DF 35 x 50 9.10 11.36 30 25 ALC80(1)203DF040 40 22000 DG 35 x 55 9.69 12.06 27 23 ALC80(1)223DG040 40 12,000 EB 40 x 30 6.31 7.6 6 53 44 ALC80(1)123EB040 40 27,000 EF 40 x 50 9.90 11.60 26 22 ALC80(1)273EF040 40 33,000 EH 40 x 60 11.19 13.02 21 18 ALC80(1)333EH040 40 39,000 EJ 40 x 70 12 .20 14.07 19 16 ALC80(1)393EJ040 40 47,000 EL 40 x 80 13.06 14.81 17 14 ALC80(1)473EL040 40 56,000 EN 40 x 100 40 68,000 FP 45 x 105 17.50 2 0.12 11 9 ALC80(1)683FP040 40 82,000 FP 45 x 105 18.33 20.56 10 9 ALC80(1)823FP040 40 100,000 KP 50 x 105 19.3 3 21.19 9 8 ALC80(1)104KP040 63 2,700 BB 25 x 30 2.91 4.16 139 104 ALC80(1)272BB063 63 3,300 BC 25 x 35 3.36 4.82 113 84 ALC80(1)332BC063 63 3,900 BD 25 x 40 3.76 5.39 96 72 ALC80(1)392BD063 63 4,300 CB 30 x 30 4.41 6.80 82 60 ALC80(1)432CB063 63 4700 CC 30 x 35 4.88 7. 81 73 53 ALC80(1)472CC063 63 5600 CC 30 x 35 5.18 7.82 64 47 ALC80(1)562CC063 63 6,200 CD 30 x 40 5.67 8.72 57 42 ALC80(1)622CD063 63 9,10 0 CF 30 x 50 7. 01 10.22 40 30 ALC80(1)912CF063 63 6,800 DC 35 x 35 5.80 8.08 56 42 ALC80(1)682DC063 63 7,5 00 DC 35 x 35 5.90 7.97 53 41 ALC80(1)752DC063 63 9,10 0 DD 35 x 40 6.68 8.96 44 34 ALC80(1)912DD063

Rated

Capacitance

Size Code

Size Code Case Size Ripple Current ESR Impedance Part Number

Case Size Ripple Current

D x L (mm)

13.94 15.62 15 13 ALC80(1)563EN040

ESR

Maximum

Impedance

Maximum

Part Number

(1) Termination code: See Termination Tables for available options.

Page 8

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

100 Hz

20°C (µF)

100 Hz

105°C (A)

10 kHz

105°C (A)

100 Hz

20°C (mΩ)

10 kHz

20°C (mΩ)

Rated

Table 1 – Ratings & Part Number Reference cont.

Rated

VDC

Capacitance

63 10000 DE 35 x 45 7.29 9.90 40 30 ALC80(1)103DE063 63 12,000 DF 35 x 50 7.99 10.62 34 26 ALC80(1)12 3DF 063 63 15,000 DH 35 x 60 9.09 11.88 28 21 ALC80(1)153DH0 63 63 7,5 00 EB 40 x 30 5.52 6.95 60 48 ALC80(1)752EB063 63 8200 EB 40 x 30 5.53 6.78 58 46 ALC80(1)822EB063 63 18,000 EF 40 x 50 8.82 10.54 28 23 ALC 80(1)183EF063 63 22,000 EH 40 x 60 10.07 11.97 24 19 ALC80(1)223EH063 63 27,000 EJ 40 x 70 11.12 13.0 2 20 17 ALC80(1)273EJ063 63 30,000 EL 40 x 80 11.8 9 13.89 18 15 ALC80(1)303EL063 63 33000 EL 40 x 80 12.01 13.80 18 15 ALC80(1)333EL063 63 39,000 EN 40 x 100 13.06 14.90 16 13 ALC80(1)393EN063 63 47000 FP 45 x 105 16.50 19.4 8 11 9 ALC80(1)473FP063 63 51,000 FP 45 x 105 16.83 19.59 11 9 ALC80(1)513FP063 63 56000 KP 50 x 105 17. 46 20.02 11 9 ALC80(1)563KP063 63 62,000 KP 50 x 105 17.79 20.09 10 9 ALC80(1)623KP063

63 68,000 KP 50 x 105 18.0 3 20.09 10 9 ALC80(1)683KP063 100 1,000 BB 25 x 30 2.36 3.40 289 237 A LC80(1)102BB100 100 1200 BC 25 x 35 2.71 3.94 239 194 ALC8 0(1)12 2BC10 0 100 1,500 BD 25 x 4 0 3.10 4.43 193 157 ALC80(1)152 BD100 100 1,600 BD 25 x 4 0 3.16 4.45 184 151 ALC80(1)162BD100 100 15 00 CB 30 x 30 3.45 5.36 185 149 A LC80(1)152CB100 100 1,600 CB 30 x 30 3.54 5.40 175 142 ALC80(1)162CB100 100 1,800 CC 30 x 35 3.93 6.15 15 3 123 ALC80(1)182CC100 100 2200 CD 30 x 40 4.47 6.91 126 10 2 ALC80(1)222CD100 100 2,400 CD 30 x 40 4.63 7.0 1 117 95 ALC80(1)242CD100 100 3,300 CF 30 x 50 5.64 8.35 86 70 ALC80(1)332CF100 100 2,700 DC 35 x 35 4.83 6.69 110 90 ALC80(1)272DC100 100 3,000 DC 35 x 35 4.94 6.65 10 2 84 ALC80(1)302DC100 100 3,600 DD 35 x 40 5.60 7.53 85 70 ALC80(1)362DD100 100 3900 DE 35 x 45 6.09 8.33 77 63 ALC80(1)392DE100 100 4,700 DF 35 x 50 6.73 9.03 65 54 ALC80(1)472DF100 100 5600 DG 35 x 55 7. 35 9.66 56 46 ALC80 (1)562DG100 100 3,000 EB 40 x 30 4.66 5.88 111 94 ALC80(1)302EB100 100 6,800 EF 40 x 50 7.5 6 9.25 52 44 ALC80(1)682EF100 100 8,200 EH 40 x 60 8.65 10.59 43 36 ALC80(1)822EH100 100 10,000 EJ 40 x 70 9.63 11.6 3 36 31 ALC 80(1)103EJ100 100 12,000 EL 40 x 80 10.47 12.45 31 27 ALC8 0(1)12 3EL10 0 100 15,000 EN 40 x 100 11.60 13.59 26 22 ALC8 0(1)153EN 100 100 18000 FP 45 x 105 14.51 17.67 20 17 ALC80(1)183FP100 100 20,000 FP 45 x 105 14.96 17. 86 18 16 ALC80(1)203FP100 100 22,000 KP 50 x 105 15.6 0 18.32 18 15 ALC80(1)223KP100 100 24,000 KP 50 x 105 15.9 0 18.40 17 15 ALC80(1)243KP100 200 330 BB 25 x 30 1.31 2.85 645 388 ALC80(1)331BB200 200 390 BC 25 x 35 1.47 3.26 544 316 ALC80(1)391BC200 200 470 BD 25 x 40 200 510 BD 25 x 40 1.74 3.75 419 253 ALC80(1)511BD200 200 560 CB 30 x 30 1.94 4.41 376 225 ALC80(1)561CB200 200 680 CC 30 x 35 2.22 5.07 310 17 9 ALC80(1)681CC200 200 820 CD 30 x 40 2.52 5.72 257 154 ALC80(1)821CD200 200 1,10 0 CF 30 x 50 3.07 6.85 192 115 ALC 80(1)112C F200 200 910 DC 35 x 35 2.77 5.77 237 144 AL C80(1)911DC 200 200 1,200 DD 35 x 40 3.27 6.61 182 111 ALC80(1)122DD200 200 1500 DF 35 x 50 3.85 7. 86 145 86 ALC80(1)152DF200 200 1,600 DF 35 x 50 3.97 7.94 137 84 ALC80(1)162DF200 200 1,800 DG 35 x 55 4.30 8.52 122 73 ALC80(1)182DG200 200 1,000 EB 40 x 30 2.90 5.39 228 142 ALC80(1)102EB200 200 2,200 EF 40 x 50 4.81 8.60 106 66 ALC80(1)222EF200 200 2,700 EH 40 x 60 5.53 9.82 86 54 ALC80(1)272EH200 200 3300 EJ 40 x 70 6.26 10.84 72 44 ALC80(1)332EJ200

Capacitance

Size Code

Size Code Case Size Ripple Current ESR Impedance Part Number

Case Size Ripple Current

D x L (mm)

1.67 3.67 452 263 ALC80(1)471BD200

ESR

Maximum

Impedance

Maximum

Part Number

(1) Termination code: See Termination Tables for available options.

Page 9

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

100 Hz

20°C (µF)

100 Hz

105°C (A)

10 kHz

105°C (A)

100 Hz

20°C (mΩ)

10 kHz

20°C (mΩ)

Rated

Table 1 – Ratings & Part Number Reference cont.

Rated

VDC

Capacitance

200 3,900 EL 40 x 80 6.90 11.67 62 39 ALC80(1)392EL200 200 4700 EN 40 x 100 7.67 12.71 52 33 ALC80(1)472EN200 200 5,600 FP 45 x 105 9.00 16.01 42 26 A LC80(1)562FP20 0 200 6,800 FP 45 x 105 9.99 16.71 36 23 ALC80(1)682FP200 200 8,200 KP 50 x 105 11.15 17.5 4 31 20 ALC80(1)822KP200 250 220 BB 25 x 30 1.17 2 .70 796 469 ALC80(1)221BB250 250 270 BC 25 x 35 1.34 3.12 648 363 ALC80(1)271BC250 250 330 BD 25 x 40 1.53 3.53 532 314 ALC80(1)331BD250 250 330 CB 30 x 30 1.62 3.98 524 306 ALC80(1)331CB250 250 390 CC 30 x 35 1.83 4.52 443 245 ALC80(1)391CC250 250 470 CC 30 x 35 2.02 4.82 370 206 ALC80(1)471CC250 250 560 CD 30 x 40 2.28 5.43 311 182 AL C80(1)561CD250 250 750 CF 30 x 50 2.78 6.52 233 137 ALC8 0(1)751CF25 0 250 620 DC 35 x 35 2.50 5.53 286 170 AL C80(1)621DC 250 250 750 DD 35 x 40 2.84 6.26 237 141 AL C80(1)75 1DD2 50 250 820 DE 35 x 45 3.06 6.81 216 122 ALC80(1)821DE250 250 1,000 DF 35 x 50 3.46 7.52 178 106 ALC80(1)102DF250 250 1,200 DG 35 x 55 3.86 8.19 150 86 ALC80(1)122DG250 250 620 EB 40 x 30 2.54 5.21 296 178 ALC80(1)621EB250 250 680 EB 40 x 30 2.64 5.23 274 159 ALC80(1)681EB250 250 1,500 EF 40 x 50 4.41 8.39 126 77 ALC80(1)152EF250 250 1,800 EH 40 x 60 5.02 9.57 105 64 ALC80(1)182EH250 250 2200 EJ 40 x 70 5.70 10.60 87 51 ALC80(1)222EJ250 250 2,700 EL 40 x 80 6.42 11. 50 72 45 ALC80(1)272EL250 250 3,300 EN 40 x 100 7.22 12.62 60 36 ALC80(1)332EN250 250 3,900 FP 45 x 105 8.42 15.83 49 29 ALC80(1)392FP250 250 4,300 FP 45 x 105 8.89 16.22 45 28 ALC80(1)432FP250 250 4700 KP 50 x 105 9.52 16.86 42 25 ALC80(1)472KP250 250 5,600 KP 50 x 105 10.40 17. 38 37 23 ALC 80(1)562K P250 350 120 BB 25 x 30 0.91 2.55 1132 529 ALC 80(1)121B B350 350 130 BB 25 x 30 0.95 2.62 1048 549 ALC80(1)131BB350 350 150 BC 25 x 35 1.0 6 2.95 906 423 ALC8 0(1)151BC350 350 180 BD 25 x 40 1.20 3.32 756 354 ALC80(1)181BD350 350 200 BD 25 x 40 1.27 3.45 683 358 ALC80(1)201BD350 350 180 CB 30 x 30 1.26 3.69 749 347 ALC80 (1)181CB350 350 200 CB 30 x 30 1.34 3.85 675 352 ALC80(1)201CB350 350 220 CC 30 x 35 1.45 4.23 613 284 ALC80(1)221CC350 350 270 CC 30 x 35 1.6 2 4.59 502 234 ALC80(1)271CC350 350 330 CD 30 x 40 1.8 5 5.21 411 215 ALC80(1)331CD350 350 430 CF 30 x 50 2.23 6.20 316 165 ALC80(1)431CF350 350 360 DC 35 x 35 2.04 5.36 381 201 ALC80(1)361DC350 350 430 DD 35 x 40 2.30 6.05 319 168 ALC80(1)431DD350 350 470 DD 35 x 40 2.41 6.18 294 140 ALC80(1)471DD350 350 560 DE 35 x 45 2.70 6.87 247 118 ALC80(1)561DE350 350 620 DF 35 x 50 350 680 DG 35 x 55 3.11 7.91 203 97 ALC80(1)681DG350 350 390 EB 40 x 30 2 .16 5.17 364 195 ALC80(1)391EB350 350 820 EF 4 0 x 50 3.54 8.25 175 94 ALC80(1)821EF350 350 1,000 EH 40 x 60 4.06 9.38 143 70 ALC80(1)102EH350 350 1,100 EH 40 x 60 4.26 9.52 132 71 ALC80(1)112EH350 350 1,200 EJ 40 x 70 4.57 10.35 120 59 ALC80(1)122EJ350 350 1,500 EL 40 x 80 5.22 11.2 9 98 49 ALC80(1)152EL350 350 1,600 EL 40 x 80 5.40 11.41 92 51 ALC80(1)162EL350 350 1800 EN 40 x 100 5.81 12.27 82 41 ALC80(1)182EN350 350 2200 FP 45 x 105 6.81 15.31 66 32 ALC80(1)222FP350 350 2,400 FP 45 x 105 7.19 15.72 61 33 ALC80(1)242FP350 350 2,700 FP 45 x 105 7.7 1 16. 23 55 28 ALC80(1)272FP350 350 3,300 KP 50 x 105 8.81 17. 27 47 26 ALC80(1)332KP350 400 100 BB 25 x 30 0.87 2.54 1213 532 ALC80(1)101BB400

Capacitance

Size Code

Size Code Case Size Ripple Current ESR Impedance Part Number

Case Size Ripple Current

D x L (mm)

2.91 7.42 223 118 ALC80(1)621D F350

ESR

Maximum

Impedance

Maximum

Part Number

(1) Termination code: See Termination Tables for available options.

Page 10

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

100 Hz

20°C (µF)

100 Hz

105°C (A)

10 kHz

105°C (A)

100 Hz

20°C (mΩ)

10 kHz

20°C (mΩ)

Rated

Table 1 – Ratings & Part Number Reference cont.

Rated

VDC

Capacitance

400 110 BB 25 x 30 0.91 2.62 1106 567 ALC80(1)111BB4 00 400 120 BC 25 x 35 0.98 2.89 1010 442 A LC80(1)121BC 400 400 150 BD 25 x 40 1.14 3.30 809 355 ALC80(1)151BD400 400 160 BD 25 x 40 1.18 3.38 761 390 ALC80(1)161BD400 400 180 CB 30 x 30 1.32 3.93 672 343 ALC80(1)181CB400 400 220 CC 30 x 35 1.5 2 4.52 550 240 ALC 80(1)221CC400 400 270 CD 30 x 40 1.74 5.1 4 448 229 ALC80(1)271CD400 400 360 CF 30 x 50 2 .11 6 .17 337 172 A LC8 0(1)361CF4 00 400 300 DC 35 x 35 1.9 3 5.34 408 210 ALC80(1)301DC400 400 390 DD 35 x 40 2.28 6.15 316 163 ALC80(1)391DD400 400 470 DE 35 x 45 2.58 6.85 263 118 ALC80(1)471DE400 400 510 DF 35 x 50 2.74 7.3 6 242 125 ALC80(1) 511DF4 00 400 560 DG 35 x 55 2.93 7.8 5 220 99 ALC80(1)5 61DG40 0 400 330 EB 40 x 30 2.07 5.16 384 200 ALC80(1)331EB400 400 680 EF 40 x 50 3.36 8.22 187 98 ALC80(1)681EF400 400 820 EH 40 x 60 3.82 9.33 156 71 ALC80(1)821EH400 400 910 EH 40 x 60 4.04 9.48 142 75 A LC80(1) 911EH400 400 1000 EJ 40 x 70 4.34 10.3 2 128 60 ALC80(1)102EJ400 400 1200 EL 40 x 80 4.85 11.17 108 51 ALC80(1)122EL400 400 1,300 EL 40 x 80 5.07 11.34 101 54 ALC80(1)132EL400 400 1,500 EN 40 x 100 5.53 12.23 88 42 ALC80(1)152EN400 400 1,800 FP 45 x 105 6.40 15 .15 71 33 ALC80(1)182FP400 400 2,200 FP 45 x 105 7.2 4 16.09 60 32 ALC80(1)222FP400 400 2,700 KP 50 x 105 8.32 17.17 50 27 ALC 80(1)272KP400 450 82 BB 25 x 30 0.82 2.42 1573 814 ALC80(1)820BB450 450 91 BB 25 x 30 0.87 2.51 1422 816 ALC80(1)910BB450 450 100 BC 25 x 35 0.94 2.78 1289 667 ALC80(1)101BC450 450 120 BD 25 x 4 0 1.0 6 3 .13 1075 556 ALC 80(1)121BD450 450 130 BD 25 x 4 0 1.11 3.23 995 571 ALC80(1)131BD450 450 120 CB 30 x 30 1.12 3.45 1068 550 ALC80(1)121CB450 450 130 CB 30 x 30 1.17 3.57 987 564 ALC80(1)131CB450 450 150 CC 30 x 35 1.3 0 4.00 855 440 ALC80(1)151CC450 450 180 CC 30 x 35 1.4 4 4.31 715 369 ALC80(1)181CC450 450 220 CD 30 x 40 1.6 4 4.90 585 335 ALC80(1)221CD450 450 300 CF 30 x 50 2.03 5.9 4 430 247 ALC80(1)301CF450 450 240 DC 35 x 35 1.81 5.09 541 311 ALC80(1)241DC450 450 300 DD 35 x 40 2.09 5.81 434 250 ALC80(1)301DD450 450 330 DE 35 x 45 2.25 6.32 394 205 ALC80(1)331DE450 450 390 DF 35 x 50 2.51 6.94 334 174 ALC80(1)391DF450 450 430 DF 35 x 50 2.65 7.14 304 176 ALC80(1)431DF450 450 470 DG 35 x 55 2.82 7.62 278 160 ALC80(1)471DG450 450 270 EB 40 x 30 1.96 4.99 496 288 ALC80(1)271EB450 450 560 EF 40 x 50 3.20 7.97 240 140 ALC80(1)561EF450 450 680 EH 40 x 60 3.66 9.07 198 105 ALC80(1)681EH450 450 750 EH 4 0 x 60 450 820 EJ 40 x 70 4 .14 10.03 165 88 ALC80(1)821EJ450 450 1,000 EL 40 x 80 4.67 10.92 136 73 ALC80(1)102EL450 450 1,100 EL 40 x 80 4.9 2 11.12 125 74 ALC80(1)112EL450 450 1,200 EN 4 0 x 100 5.20 11.8 8 114 62 ALC80(1)122EN450 450 1,500 FP 45 x 105 6.25 14.04 109 70 ALC80(1)152FP450 450 1,800 KP 50 x 105 7.1 3 15.27 93 57 ALC80(1)182KP450 450 2,000 KP 5 0 x 105 7.5 8 15.77 84 55 ALC80(1)202KP450 500 68 BB 25 x 30 0.77 2.06 2492 1656 ALC80(1)680BB500 500 75 BB 25 x 30 0.82 2.15 2263 1564 ALC80(1)750BB500 500 82 BC 25 x 35 0.88 2.36 2065 137 2 ALC80(1)820BC500 500 100 BD 25 x 40 1.00 2.67 1695 112 6 ALC80(1)101BD500 500 110 BD 25 x 40 1.06 2.79 1543 1066 ALC8 0(1)111B D500 500 110 CB 30 x 30 1.11 3.0 4 1536 1059 A LC80(1)111CB500 500 120 CB 30 x 30 1.16 3.15 14 09 936 ALC 80(1)121CB500

Capacitance

Size Code

Size Code Case Size Ripple Current ESR Impedance Part Number

Case Size Ripple Current

D x L (mm)

3.86 9.23 181 106 ALC80(1)751EH450

ESR

Maximum

Impedance

Maximum

Part Number

(1) Termination code: See Termination Tables for available options.

Page 11

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

100 Hz

20°C (µF)

100 Hz

105°C (A)

10 kHz

105°C (A)

100 Hz

20°C (mΩ)

10 kHz

20°C (mΩ)

Table 1 – Ratings & Part Number Reference cont.

Rated

VDC

Capacitance

500 150 CC 30 x 35 1.35 3.66 112 8 749 ALC80(1)151CC500 500 180 CD 30 x 40 1.53 4.13 940 649 ALC80 (1)181CD50 0 500 240 CF 30 x 50 1.8 7 4.99 706 487 ALC80(1)241CF500 500 200 DC 35 x 35 1.71 4.40 851 589 ALC80(1)201DC500 500 240 DD 35 x 40 1.93 4.97 709 491 ALC80(1)241DD500 500 270 DE 35 x 45 2 .10 5.43 630 420 ALC80(1)271DE500 500 330 DF 35 x 50 2.39 6.07 517 358 ALC80(1)331DF500 500 390 DG 35 x 55 2.66 6.66 438 293 ALC80(1)391DG500 500 220 EB 40 x 30 1.84 4.40 791 549 ALC80 (1)221E B500 500 470 EF 4 0 x 50 3.04 7.12 372 259 ALC80(1)471EF500 500 560 EH 40 x 60 3.44 8.08 312 209 ALC80(1)561EH500 500 620 EH 40 x 60 3.64 8.29 283 197 ALC80 (1)621EH500 500 680 EJ 40 x 70 3.91 9.00 258 173 A LC80(1)681EJ500 500 820 EL 40 x 80 4.39 9.86 215 15 0 ALC80(1)821EL500 500 1,000 EN 40 x 100 4.95 10.8 5 177 120 ALC80(1)102EN500 500 1200 FP 45 x 105 5.64 12.4 4 167 119 ALC80(1)122 FP500 500 1500 KP 50 x 105 6.62 13.91 136 98 ALC8 0(1)152KP50 0 500 1800 KP 50 x 105 7.3 8 14.81 115 83 ALC80(1)182KP500

Rated

Capacitance

Size Code

Size Code Case Size Ripple Current ESR Impedance Part Number

Case Size Ripple Current

D x L (mm)

ESR

Maximum

Impedance

Maximum

Part Number

(1) Termination code: See Termination Tables for available options.

Environmental Compliance

All Part Numbers in this datasheet are Reach and RoHS compliant and Halogen-Free.

As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production.

In Europe (RoHS Directive) and in some other geographical areas such as China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced

to help our customers' obligations to guarantee their products and fulll these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulll the requirement of containing

less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation worldwide and make any necessary changes in its products, whenever needed.

Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors.

Due to customer requirements, there may appear additional markings such as lead-free (LF), or lead-free wires (LFW) on the label.

Page 12

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

Mechanical Data

Polarity and Reversed Voltage

Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil. If this were to be reversed then the electrolytic process that took place in forming the oxide layer on the anode would be recreated in trying to form an oxide layer on the cathode. In forming the cathode foil in this way, heat would be generated and gas given off within the capacitor, usually leading to catastrophic failure.

The cathode foil already possesses a thin stabilized oxide layer. This thin oxide layer is equivalent to a forming voltage of approximately 2 V. As a result, the capacitor can withstand a voltage reversal of up to 2 V for short periods. Above this voltage, the formation process will commence. Aluminium Electrolytic capacitors can also be manufactured for use in intermittent AC applications by using two anode foils in place of one anode and one cathode.

Mounting Position

The capacitor can be mounted upright or inclined to a horizontal position. Special attention for the safety vent coverage, which this ensures that internal gas generated can escape when the pressure reaches a certain value due to overstress or catastrophic failure. All mounting positions must allow the safety vent to work properly.

Insulating Resistance

≥ 100 MΩ at 100 VDC across insulating sleeve.

Voltage Proof

≥ 3,500 VDC across insulating sleeve. ≥ 2,500 VAC across insulating sleeve.

Safety Vent

For diameters up to 40 mm, the safety vent for overpressure is featured on the base (opposing end to the terminals), and for diameters 45 mm or higher, the safety vent is featured in the side of the can. This is a weakened area in the bottom of the can that is designed to relieve build-up of internal pressure due to overstress or catastrophic failure.

Page 13

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

Marking

KEMET Logo

Rated Capacitance,

Capacitance Tolerance

Series, Capacitance

Code, Voltage Code

Date of Manufacture,

Batch Number

Polarity Stripe (−)

Rated Voltage (VDC)

Climatic Category

Made in the European Union

Construction

Insulating End Disc

Insulating Sleeve

Paper Spacer Impregnated

with Electrolyte

(First Layer)

Cathode Aluminum Foil,

Etched (Second Layer)

Polarity

Stripe (−)

Paper Spacer Impregnated

with Electrolyte

(Third Layer)

Aluminum

Can

Anode Aluminum Foil, Etched, Covered with Aluminum Oxide

(Fourth Layer)

Wound

Element Tabs

Termination Pin

Tab Connection

to Terminal

Margin

Aluminum Can

Insulating Sleeve

Detailed Cross Section

Rubber Seal

Termination Pin (−)

Termination Pin (+)

Page 14

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

Extended cathode

Anode foil

Cathode foil

Tissues

Foil tabs

Aging

Etching

Forming

Winding

Decking

Impregnation

Assembly

Testing

Sleeving

Packing

Construction Data

The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.

The deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. The complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. Throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte.

Each capacitor is aged and tested before being sleeved and packed. The purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. Aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. The process may take several hours to complete.

Damage to the oxide layer can occur due to variety of reasons:

• Slitting of the anode foil after forming

• Attaching the tabs to the anode foil

• Minor mechanical damage caused during winding

A sample from each batch is taken by the quality department after completion of the production process. This sample size is controlled

by the use of recognized sampling tables de ned in BS 6001.

The following tests are applied and may be varied at the request of the customer. In this case the batch, or special procedure, will determine the course of action.

Electrical:

• Leakage current

• Capacitance

• ESR

• Impedance

• Tan Delta

Mechanical/Visual:

• Overall dimensions

• Torque test of mounting stud

• Print detail

• Box labels

• Packaging, including packed quantity

Page 15

Snap-In Aluminum Electrolytic Capacitors – ALC80, +105°C

KEMET Electronics Corporation Sales Oﬃ ces

For a complete list of our global sales o ces, please visit www.kemet.com/sales.

Disclaimer

YAGEO Corporation and its a liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space ﬂ ight.

All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such

applications, but are not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use.

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury

or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required.

KEMET requires its products to be packaged and shipped on pallets. This is because KEMET’s products are speci cally designed to be packed onto pallets during

shipment. If for any reason, the products are removed from pallets by the shipping party and shipped to the end customer, then additional external protection is

required. In this instance, an external box with two carton layers and an upwards orientation sticker must be used by the shipping party, with the empty space  lled with  lling material, and afterwards sealing the box. If this packing and packaging guideline is not followed by the shipping party, the shipping party, and not KEMET,

will be held responsible for any packaging, packing and/or product damages upon delivery of the products to the end customer. KEMET hereby disclaims any liability

for damages to the products or otherwise that have been, or threaten to be, inﬂ icted, result from or are in any way related to the packaging, packing or damage by the

shipping party in contravention of the packing and packaging guidelines herein.

KEMET is a registered trademark of KEMET Electronics Corporation.

Datasheet ALC80 series Specification

Specifications and Main Features

Frequently Asked Questions

User Manual