Page 1
•
•
Input
Input Voltage • 90-264 VAC
Input Frequency • 47-63 Hz
Inrush Current • 50 A @ 115 VAC,
100 A max at 264 VAC
Input Current • 1.10 A max at 115 VAC,
0.55A max at 230 VAC
Power Factor • 0.99 typical
Output
Output Voltage • 12-48 VDC
Output Power • 100 Watts
Minimum Load • 0 minimum load required
Line Regulation • ±1% max
Load Regulation • See Table
Set Point Accuracy • ±2% max
Ripple & Noise • ±1% max (peak-peak)
Transient Response • 4% max deviation, 500µs recovery
time for a 25% load change
Temperature • ±0.04%/°C
Coefficient
Hold Up Time • 20 ms minimum at 115 VAC
Overvoltage • 110% to 130% with auto recovery
Protection
Overcurrent • 120% to 140% with auto recovery
Protection
General
Efficiency • 85% typical
Power Density • 4.4 W/in
3
Withstand Voltage • 3000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground
MTBF • 100,000 hrs min per MIL-HDBK-217F
Size • 2.76” x 5.91” x 1.38”
Weight • 520 grams
Environmental
Operating • 0°C to +65°C with derating
Temperature Derate linearly from 100% load
at 50°C to 0% load at 65°C
Relative Humidity • 5% to 95%, non condensing
Storage Temperature • -20 °C to +85 `°C
EMC & Safety
EMI/EMC • EN55022, CISPR22 and
FCC Class B conducted and radiated
CE Mark
Safety Approvals • UL1950, CSA C22.2 No 234 per cUL
EN60950
100 Watts
AED100 Series
AC/DC External Desktop
Specification
•
Intelligent Design Quality Product
XPiQ inc.
CE Marked For EMC & LVD
•
Active PFC - Meets EN61000-3-2, -3
•
High Efficiency - 85% Typical
•
High Power Density
•
Small Size, Low Profile
•
Overvoltage & Short Circuit Protected
•
International Safety Approvals
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Page 2
Vnom Imin Imax Total Regulation Maximum Output Model
Power Number
12 V 0 A 8.33 A 4% 100 W AED100US12
15 V 0 A 6.67 A 4% 100 W AED100US15
18 V 0 A 5.56 A 2% 100 W AED100US18
19 V 0 A 5.26 A 2% 100 W AED100US19
24 V 0 A 4.17 A 2% 100 W AED100US24
48 V 0 A 2.08 A 2% 100 W AED100US48
OUTPUT VOLTAGE & CURRENT RATINGS AED100
Mechanical Details
Derating Curve
NOTES
1. Dimensions shown in mm (inches).
2. Tolerance 0.5 (0.02) maximum.
3. Output connector is 5.5mm outer
diameter barrel. Inner diameter is
2.5mm with center positive (+)/outer
shell negative (-) polarity.
4. Cable length for AED100US12 and US15 is 1219 mm
(48”) typical, other models is 1800mm (70”) typical.
5. Optional output connectors available.
* Total regulation includes initial tolerance, line regulation and load regulation.
Note
•
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Loading...