Page 1
Low-Voltage Manual Reset & Watchdog
Preliminary Technical Data
ADM8611/ADM8616/ADM8617/ADM8618
FEATURES
Precision 1.8V to 5V Power Supply Monitoring
9 Reset Threshold Options:
1.58V to 4.63V
140ms (Min) Reset Timeout
Manual Reset Input (ADM8611)
Watchdog Timer (ADM8616–ADM8618)
Reset Output Stages
Push-Pull Active-Low
Open-Drain Active-Low
Push-Pull Active-High
Low Power Consumption (3µA)
Guaranteed Reset Output valid to V
CC
=1V
Power Supply Glitch Immunity
Specified Over -40°C to +85°C Temperature Range
4-Lead SC70 Package
APPLICATIONS
Microprocessor Systems
Computers
Controllers
Intelligent Instruments
Portable Equipment
GENERAL DESCRIPTION
The ADM8611/ADM8616/ADM8617/ADM8618 are
supervisory circuits which monitor power supply voltage levels
and code execution integrity in microprocessor-based systems.
A power-on-reset signal is generated when the supply voltage
rises to a preset threshold level. The ADM8611’s debounced
manual reset input can be used to initiate a reset by means of an
external push-button or logic signal. The ADM8616–ADM8618
have an on-chip watchdog timer which can reset the
microprocessor if it fails to strobe within a preset timeout
period.
Table 1. Selection Table
Part No. Manual Reset Watchdog
ADM8611 Yes - Push-Pull
ADM8616 - Yes Push-Pull
ADM8617 - Yes Open-Drain
ADM8618 - Yes Push-Pull
Supervisory Circuits in 4-Lead SC70
FUNCTIONAL BLOCK DIAGRAMS
V
ADM8616
V
CC
V
REF
GND
RESET
GENERATOR
WATCHDOG
DETECTOR
WDI
Figure 1.
Each part is available in a choice of the following 9 reset
threshold options: 1.58V, 1.67V, 2.19V, 2.32V, 2.63V, 2.93V,
3.08V, 4.38V and 4.63V. The reset timeout periods are 20ms
(min) and 140ms (min) for the ADM8611 and ADM8616–
ADM8618, respectively. The watchdog timeout period is 1.6s
(typ). The parts differ in terms of reset output configuration, as
indicated in table 1.
The ADM8611/ADM8616/ADM8617/ADM8618 are available
in 4-lead SC70 packages and typically consume only 3µA,
making them suitable for use in low power portable
applications.
Output Stage
RESET
RESET
CC
RESET
Rev. PrB
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.
www.analog.com
Page 2
ADM8611/ADM8616/ADM8617/ADM8618 Preliminary Technical Data
ADM8611/ADM8616/ADM8617/ADM8618—SPECIFICATIONS
Table 2. VCC=Full Operating Range, TA=T
Parameter Min Typ Max Units Test Conditions/Comments
SUPPLY
VCC Operating Voltage Range 1 5.5 V
Supply Current 10 20 µA VCC=5.5V
5 12 µA VCC=3.6V
RESET THRESHOLD VOLTAGE
ADM861_L
ADM861_M
ADM861_T
ADM861_S
ADM861_R
ADM861_Z
ADM861_Y
ADM861_W
ADM861_V
RESET THRESHOLD TEMPERATURE COEFFICIENT 40 ppm/°C
RESET THRESHOLD HYSTERESIS 3 mV
RESET TIMEOUT PERIOD 20 30 40 ms ADM8611
140 200 280 ms ADM8616–ADM8618
VCC TO RESET DELAY 40 µs V
PUSH-PULL OUTPUT (ADM8611, ADM8616, ADM8618)
RESET
Output Voltage
0.3 V VCC>=1.2V, I
0.3 V VCC>=2.7V, I
0.4 V VCC>=4.5V, I
0.8x VCC V VCC>=2.7V, I
V
RESET
Rise Time
RESET Output Voltage 0.3 V VCC>=2.7V, I
0.4 V VCC>=4.5V, I
0.8x VCC V VCC>=1.8V, I
0.8x VCC V VCC>=2.7V, I
V
OPEN-DRAIN OUTPUT (ADM8617)
RESET
Output Voltage
0.3 V VCC>=1.2V, I
0.3 V VCC>=2.7V, I
0.4 V VCC>=4.5V, I
Open-Drain Reset Output Leakage Current 1 µA
MIN
to T
, unless otherwise noted
MAX
4.50 4.63 4.75 V TA=-40°C to +85°C
4.25 4.38 4.50 V TA=-40°C to +85°C
3.00 3.08 3.15 V TA=-40°C to +85°C
2.85 2.93 3.00 V TA=-40°C to +85°C
2.55 2.63 2.70 V TA=-40°C to +85°C
2.25 2.32 2.38 V TA=-40°C to +85°C
2.12 2.19 2.25 V TA=-40°C to +85°C
1.62 1.67 1.71 V TA=-40°C to +85°C
1.52 1.58 1.62 V TA=-40°C to +85°C
0.3 V VCC>=1.0V, I
-1.5 V VCC>=4.5V, I
CC
5 25 ns
-1.5 VCC>=4.5V, I
CC
0.3 V V
falling at 1mV/µs
CC
=50µA
SINK
=100µA
SINK
=1.2mA
SINK
=3.2mA
SINK
=500µA
SOURCE
=800µA
SOURCE
From 10% to 90% V
=3.3V
V
CC
=1.2mA
SINK
=3.2mA
SINK
=150µA
SOURCE
=500µA
SOURCE
=800µA
SOURCE
>=1.0V, I
CC
=50µA
SINK
=100µA
SINK
=1.2mA
SINK
=3.2mA
SINK
, CL=5pF,
CC
Rev. PrB | Page 2 of 7
Page 3
Preliminary Technical Data ADM8611/ADM8616/ADM8617/ADM8618
Parameter Min Typ Max Units Test Conditions/Comments
MANUAL RESET INPUT (ADM8611)
MR Input Threshold
0.7xVCC V
MR Input Pulse Width
MR Glitch Rejection
MR Pull-up Resistance
MR to Reset Delay
WATCHDOG INPUT (ADM8616, ADM8617, ADM8618)
Watchdog Timeout Period 4.3 6.3 9.3 ms ADM86___W
71 102 153 ms ADM86___X
1.12 1.6 2.4 s ADM86___Y
17.9 25.6 38.4 s ADM86___Z
WDI Pulse Width 50 ns VIL=0.3xVCC, VIH=0.7xVCC,
WDI Input Threshold 0.3xVCC V
0.7xVCC V
WDI Input Current 120 160 µA V
0.3xVCC V
1 µs
100 ns
25 50 75
200 ns
-20 -15 µA V
k⍀
= VCC, time average
WDI
=0, time average
WDI
ABSOLUTE MAXIMUM RATINGS
Table 3. TA = 25°C unless otherwise noted.
Parameter Rating
VCC -0.3V to +6V
RESET
/RESET
Output Current (RESET,
Operating Temperature Range -40°C to +85°C
Storage Temperature Range -65°C to +150°C
θJA Thermal Impedance, SC70
Lead Temperature
Soldering (10 sec) 300°C
Vapour Phase (60 sec) 215°C
Infrared (15 sec) 220°C
RESET
)
-0.3V to +6V
20mA
146°C/W
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rev. PrB | Page 3 of 7
Page 4
ADM8611/ADM8616/ADM8617/ADM8618 Preliminary Technical Data
PIN CONFIGURATIONS AND FUNCTIONAL DESCRIPTIONS
4
V
CC
3
GND
MR/WDI
1
ADM861x
TOP VIEW
(Not to Scale)
2
RESET/RESET
Table 4. Pin Functional Descriptions
Pin No. Name Description
1
RESET
(ADM8616/ADM8617)
Active-Low Reset Output, which is asserted whenever VCC is below the reset.threshold, VTH.
Push-Pull Output Stage for ADM8616.
Open-Drain Output Stage for ADM8617.
RESET (ADM8618) Active-High, Push-Pull Reset Output.
2
MR
(ADM8611)
Manual Reset Input. This is an active-low input which, when forced low for at least 1µs,
generates a reset.
Features a 52k⍀ internal pull-up.
WDI
(ADM8616/ADM8617/ADM8618)
Watchdog Input. Generates a reset if the logic level on the pin remains low or high for the
duration of the watchdog timeout. The timer is cleared if a logic transition occurs on this
pin or if a reset is generated. Leave floating to disable the watchdog timer.
3 GND Ground
4 VCC Power Supply Voltage being Monitored.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. PrB | Page 4 of 7
Page 5
Preliminary Technical Data ADM8611/ADM8616/ADM8617/ADM8618
OUTLINE DIMENSIONS
2.20
1.35
1.15
PIN 1
0.65 BSC
1.80
4 3
1
2
0.50 BSC
2.40
1.80
1.00
0.80
0.10 MAX
0.30
0.15
0.10 COPLANARITY
PACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC82
EXCEPT FOR WIDTH OF PIN-2 AS SHOWN
Figure 2. 4-Lead Plastic Surface Mount Package [SC70]
Dimensions shown in millimeters
0.70
0.50
1.10
0.80
SEATING
PLANE
(KS-4)
0.18
0.10
0.30
0.10
Rev. PrA | Page 5 of 7
Page 6
ADM8611/ADM8616/ADM8617/ADM8618 Preliminary Technical Data
ORDERING GUIDE (ADM8611/ADM8616)
Model1 Reset Threshold (V) Temperature Range Quantity Package Type Branding
ADM8611LABKS-RL 4.63 -40°C to +85°C 10k SC70-4 N0F
ADM8611LABKS-RL7 4.63 -40°C to +85°C 3k SC70-4 N0F
ADM8611MABKS-RL 4.38 -40°C to +85°C 10k SC70-4 N0F
ADM8611MABKS-RL7 4.38 -40°C to +85°C 3k SC70-4 N0F
ADM8611TABKS-RL 3.08 -40°C to +85°C 10k SC70-4 N0F
ADM8611TABKS-RL7 3.08 -40°C to +85°C 3k SC70-4 N0F
ADM8611SABKS-RL 2.93 -40°C to +85°C 10k SC70-4 N0F
ADM8611SABKS-RL7 2.93 -40°C to +85°C 3k SC70-4 N0F
ADM8611RABKS-RL 2.63 -40°C to +85°C 10k SC70-4 N0F
ADM8611RABKS-RL7 2.63 -40°C to +85°C 3k SC70-4 N0F
ADM8611ZABKS-RL 2.32 -40°C to +85°C 10k SC70-4 N0F
ADM8611ZABKS-RL7 2.32 -40°C to +85°C 3k SC70-4 N0F
ADM8611YABKS-RL 2.19 -40°C to +85°C 10k SC70-4 N0F
ADM8611YABKS-RL7 2.19 -40°C to +85°C 3k SC70-4 N0F
ADM8611WABKS-RL 1.67 -40°C to +85°C 10k SC70-4 N0F
ADM8611WABKS-RL7 1.67 -40°C to +85°C 3k SC70-4 N0F
ADM8611VABKS-RL 1.58 -40°C to +85°C 10k SC70-4 N0F
ADM8611VABKS-RL7 1.58 -40°C to +85°C 3k SC70-4 N0F
ADM8616LAKS-RL 4.63 -40°C to +85°C 10k SC70-4 N0G
ADM8616LAKS-RL7 4.63 -40°C to +85°C 3k SC70-4 N0G
ADM8616MAKS-RL 4.38 -40°C to +85°C 10k SC70-4 N0G
ADM8616MAKS-RL7 4.38 -40°C to +85°C 3k SC70-4 N0G
ADM8616TAKS-RL 3.08 -40°C to +85°C 10k SC70-4 N0G
ADM8616TAKS-RL7 3.08 -40°C to +85°C 3k SC70-4 N0G
ADM8616SAKS-RL 2.93 -40°C to +85°C 10k SC70-4 N0G
ADM8616SAKS-RL7 2.93 -40°C to +85°C 3k SC70-4 N0G
ADM8616RAKS-RL 2.63 -40°C to +85°C 10k SC70-4 N0G
ADM8616RAKS-RL7 2.63 -40°C to +85°C 3k SC70-4 N0G
ADM8616ZAKS-RL 2.32 -40°C to +85°C 10k SC70-4 N0G
ADM8616ZAKS-RL7 2.32 -40°C to +85°C 3k SC70-4 N0G
ADM8616YAKS-RL 2.19 -40°C to +85°C 10k SC70-4 N0G
ADM8616YAKS-RL7 2.19 -40°C to +85°C 3k SC70-4 N0G
ADM8616WAKS-RL 1.67 -40°C to +85°C 10k SC70-4 N0G
ADM8616WAKS-RL7 1.67 -40°C to +85°C 3k SC70-4 N0G
ADM8616VAKS-RL 1.58 -40°C to +85°C 10k SC70-4 N0G
ADM8616VAKS-RL7 1.58 -40°C to +85°C 3k SC70-4 N0G
Rev. PrB | Page 6 of 7
Page 7
Preliminary Technical Data ADM8611/ADM8616/ADM8617/ADM8618
ORDERING GUIDE (ADM8617/ADM8618)
Model Reset Threshold (V) Temperature Range Quantity Package Type Branding
ADM8617LACYKS-RL 4.63 -40°C to +85°C 10k SC70-4 N0H
ADM8617LACYKS-RL7 4.63 -40°C to +85°C 3k SC70-4 N0H
ADM8617MACYKS-RL 4.38 -40°C to +85°C 10k SC70-4 N0H
ADM8617MACYKS-RL7 4.38 -40°C to +85°C 3k SC70-4 N0H
ADM8617TACYKS-RL 3.08 -40°C to +85°C 10k SC70-4 N0H
ADM8617TACYKS-RL7 3.08 -40°C to +85°C 3k SC70-4 N0H
ADM8617SACYKS-RL 2.93 -40°C to +85°C 10k SC70-4 N0H
ADM8617SACYKS-RL7 2.93 -40°C to +85°C 3k SC70-4 N0H
ADM8617RACYKS-RL 2.63 -40°C to +85°C 10k SC70-4 N0H
ADM8617RACYKS-RL7 2.63 -40°C to +85°C 3k SC70-4 N0H
ADM8617ZACYKS-RL 2.32 -40°C to +85°C 10k SC70-4 N0H
ADM8617ZACYKS-RL7 2.32 -40°C to +85°C 3k SC70-4 N0H
ADM8617YACYKS-RL 2.19 -40°C to +85°C 10k SC70-4 N0H
ADM8617YACYKS-RL7 2.19 -40°C to +85°C 3k SC70-4 N0H
ADM8617WACYKS-RL 1.67 -40°C to +85°C 10k SC70-4 N0H
ADM8617WACYKS-RL7 1.67 -40°C to +85°C 3k SC70-4 N0H
ADM8617VACYKS-RL 1.58 -40°C to +85°C 10k SC70-4 N0H
ADM8617VACYKS-RL7 1.58 -40°C to +85°C 3k SC70-4 N0H
ADM8618LACYKS-RL 4.63 -40°C to +85°C 10k SC70-4 N0J
ADM8618LACYKS-RL7 4.63 -40°C to +85°C 3k SC70-4 N0J
ADM8618MACYKS-RL 4.38 -40°C to +85°C 10k SC70-4 N0J
ADM8618MACYKS-RL7 4.38 -40°C to +85°C 3k SC70-4 N0J
ADM8618TACYKS-RL 3.08 -40°C to +85°C 10k SC70-4 N0J
ADM8618TACYKS-RL7 3.08 -40°C to +85°C 3k SC70-4 N0J
ADM8618SACYKS-RL 2.93 -40°C to +85°C 10k SC70-4 N0J
ADM8618SACYKS-RL7 2.93 -40°C to +85°C 3k SC70-4 N0J
ADM8618RACYKS-RL 2.63 -40°C to +85°C 10k SC70-4 N0J
ADM8618RACYKS-RL7 2.63 -40°C to +85°C 3k SC70-4 N0J
ADM8618ZACYKS-RL 2.32 -40°C to +85°C 10k SC70-4 N0J
ADM8618ZACYKS-RL7 2.32 -40°C to +85°C 3k SC70-4 N0J
ADM8618YACYKS-RL 2.19 -40°C to +85°C 10k SC70-4 N0J
ADM8618YACYKS-RL7 2.19 -40°C to +85°C 3k SC70-4 N0J
ADM8618WACYKS-RL 1.67 -40°C to +85°C 10k SC70-4 N0J
ADM8618WACYKS-RL7 1.67 -40°C to +85°C 3k SC70-4 N0J
ADM8618VACYKS-RL 1.58 -40°C to +85°C 10k SC70-4 N0J
ADM8618VACYKS-RL7 1.58 -40°C to +85°C 3k SC70-4 N0J
1
Entries in bold type are standard models. Contact factory for availability of non-standard models.
© 2004 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective companies.
Printed in the U.S.A.
PR04795-0-3/04(PrA)
Rev. PrA | Page 7 of 7
Loading...