Datasheet AD9357 Datasheet (ANALOG DEVICES)

Download

Page 1

WiMAX/BWA/LTE RF MxFE

FILTER

DAC

AD9357

RX1P,

RX1N

RX2P,RX2N

TX1P,TX1N

GPO[3:0] GPO

AUXADCx

INPUTS

AUXDACx OUTPUTS

TX1

POWER

DETECT

XTALN XTALP

REF_CLK IN/OUT

D[11:0]

CTRL_OUT

[7:0]

DATA_CLK

DATA_VALID

TXNRX

FILTER

SPI_x

DAC

FILTER

TX2P,TX2N

TX2

POWER

DETECT

FB_CLK

CTRL_IN

[3:0]

ENAGC

FILTER

DATA

INTERFACE

FILTER

LDOs

TEMP

DAC DAC

CTRL

ADC

BBPLL, RFPLL,

DATA_CLK,

SYNTH

SPI

08597-001

FEATURES

RF transceiver with integrated 12-bit ADCs and DACs Band: 3.3 GHz to 3.8 GHz

3.5 MHz < BW < 10 MHz Superior receiver sensitivity with noise figure (NF) < 3 dB Highly linear and spectrally pure transmitter

Tx EVM: −38 dB SNR: >145 dB/Hz at frequency offset >70 MHz

Transmit (Tx) power control range of 58 dB,

resolution of 0.25 dB

Receive (Rx) gain control

Real-time monitor and control signals for manual gain

Autonomous automatic gain control (AGC) Automatic frequency correction: <0.012 ppm Integrated fractional-N synthesizer

Integrated phase noise: <0.58° rms Multichip synchronization Industry-standard JESD207 and ADI/Q digital interface

APPLICATIONS

WiMAX/ BWA/ LT E

Femtocell/picocell/microcell base stations

Fixed CPEs

2 × 2 MIMO Transceiver

AD9357

FUNCTIONAL BLOCK DIAGRAM

Figure 1.

GENERAL DESCRIPTION

The AD9357 is a radio frequency (RF) transceiver with high performance dual receivers and transmitters, ideally suited for WiMAX, BWA, and LTE base stations and fixed CPEs. The RF MxFE® combines an RF front end with a mixed-signal baseband, enabling an easy-to-use JESD207 or ADI/Q® digital interface to the baseband processor (BBP), ASIC, or FPGA. The AD9357 operates in the 3.3 GHz to 3.8 GHz range, covering most licensed and unlicensed bands, and supports channel bandwidths of 3.5 MHz,

4.375 MHz, 5 MHz, 7 MHz, 8.75 MHz, and 10 MHz.

The direct-conversion receivers have state-of-the-art noise figure and linearity and require no external components with the exception of baluns. The complete RF subsystem integrates autonomous AGC loops, dc offset corrections, and quadrature calibrations, eliminating the need for high speed interaction with the BBP.

Two high dynamic range ADCs, followed by decimation and channel filters, digitize the received signals and produce 12-bit output signals at a sample rate determined by the bandwidth mode. The transmit path takes 12-bit input data and interpolates before converting to the analog domain and upconverting to the carrier frequency.

Rev. Sp0

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Anal og Devices. Trademarks and registered trademarks are the prop erty of their respective owner s.

A highly linear transmit path and excellent spectral purity result in an error vector magnitude (EVM) of −38 dB, while the extremely low sideband noise of −145 dBc/Hz at 70 MHz frequency offset enables high-power picocell applications. An accurate power detector with a range of more than 50 dB in 0.25 dB steps measures the output power of each transmitter independently.

The reference frequency can be provided by an external reference clock or by an internal digitally controlled crystal oscillator (DCXO). The DCXO resolution is 0.012 ppm.

Using the built-in state machine to control the device, the AD9357 can be easily controlled in time division duplexing (TDD), halfduplex frequency division duplexing (HFDD), or, if two devices are used, frequency division duplexing (FDD) mode.

One three-input internal auxiliary ADC and two auxiliary DACs are available for system monitoring and control. A user-defined state machine can automatically sequence four GPOs. A single 3.3 V supply powers the device with on-chip low dropout linear voltage regulators (LDOs), providing all other required supplies. The AD9357 package is a 10 mm × 10 mm, 144-ball CSP_BGA.