Page 1
© Copyright Semtech Corp 2000
Semtech reserves the right to change specifications on catalog devices without notice.
BLOCK DIAGRAM
DESCRIPTION
The ACS406CS comprises a chip set of two highly
integrated devices, the ACS9010 and ACS4060. The
ACS9010 is an analog transceiver device and the
ACS4060 is a mixed signal device.
The ACS406CS supports full duplex serial data of up to
8.448Mbps over one fiber with link lengths up to 25km.
The available bandwidth can be shared over 1 to 8
channels of 1 x E2/T2, 4 x E1/T1, 8 x 1.024Mbps plus
separate maintenance channel(s). The ACS406CS
provides five transmit/receive clock domains enabling
four independent E1/T1 channels and a maintenance
channel to be supported at one time.
The ACS9010 is a transceiver which integrates the Laser/
LED driver as well as the PIN receiver circuitry including
the TIA and post amplifier.
The ACS4060 integrates the multi-channel mux/de-mux
logic with de-jittering circuits for each channel, plus the
clock and data recovery. Communicating modems
automatically maintain synchronisation with each other
even when no data is being transmitted/received. Link
lengths from zero to maximum distance are catered for
automatically during system synchronisation.
FEATURES
·
Two chip set supporting full duplex serial data
transmission up to 8.448Mbps over one fiber
·Multi-channel operation with full loopback diagnostics
per channel
·Up to 8 independent synchronous data channels:
1 x E2/T2
4 x E1/T1
8 x 1.024Mbps
·Additional 64kbps maintenance channel with option of
4 x 16kbps multi-channel operation and framing signal
for main channels
·Standard interfaces for Line Interface Units (LIU) or
Framers
·Select between NRZ and pseudo-bipolar HDB3/AMI/
B8ZS input data coding types
·Support for Bi-Directional, single wavelength
duplexers and LED/Laser + PIN
·Link lengths up to 25km on single mode fiber
·Typical latency of 0.75ms
·Bit Error Rate (BER) of 10
-10
·Low power, single 5V supply
·Operating temperature (ambient) of -40 to 85
°
C
·ACS9010 available in TQFP44 package, ACS4060
available in TQFP100 package.
Advanced Communications
Revision 1.3 March 2000
PRODUCT BRIEF
ACS406CS
4 x E1/T1 Fiber Mux
4 x E1/T1 Fiber Mux/De-mux over One Fiber Optic Cable
xtixto
rpos1
rneg1
rclk1
rpos4
rneg4
rclk4
4 x
tpos1
tneg1
tclk1
tpos4
tneg4
tclk4
4 x
rmd1
rmclk
tmd1
tmclk
dcderrl losserrc
LED/Laser Driver
PIN Receiver
ACS4060
ACS9010
REC
PLL
8B10B
DEC
S2P
RX AND LOCK CONTROL
PIN G PO N G ENG I NE
RX
FIFO
P2S
LINE
CODER
DATA
SLICE
XTAL
OSC
P2S
LINE
CODER
PLL
P2S
PLL
P2S
8B10B
CODER
TX CONT RO L
PIN G PO N G ENG I NE
TX
FIFO
S2P
LINE
DEC
S2P
LINE
DEC
MODE CONTROL /
STATUS
S2P
PLL
Page 2
ISO9001
CERTIFIED
Semtech reserves the right to change specifications on catalog devices without notice. © Copyright Semtech Corp 2000
Advanced Communications
Revision 1.3 March 2000
PRODUCT BRIEF
For additional information, contact the following:
Semtech Corporation Advanced Communications Products
E-Mail: AdvCom@semtech.com
Internet: http://www.semtech.com
USA: 652 Mitchell Road, Newbury Park, CA 91320-2289
Tel: +1 805 498 2111, Fax: +1 805 498 3804
FAR EAST: 11F, No. 46, Lane 11, Kuang Fu North Road, Taipei, Taiwan, R.O.C.
Tel: +886 2 2748 3380, Fax: +886 2 2748 3390
EUROPE: Delta House, Chilworth Research Centre, Southampton, Hants, SO16 7NS, UK
Tel: +44 23 80 769008, Fax: +44 23 80 768612
APPLICATIONS
·
Add/Drop Multiplexers
·Point to point FOM
·ISDN fiber extender
·N x E1/T1 Fiber Mux/Demux - 2G+ and 3G Base Station interconnect.
Single Fiber Link
4 transmit data channels
4 receive data channels
4 transmit data clocks
4 receive data clocks
4 transmit maint. channels
4 receive maint. channels
1 transmit maint. clock
1 receive maint. clock
TPOS1/TNEG1
TPOS2/TNEG2
TPOS3/TNEG3
TPOS4/TNEG4
RPOS1/RNEG1
RPOS2/RNEG2
RPOS3/RNEG3
RPOS4/RNEG4
TCLK1/RCLK1
TCLK2/RCLK2
TCLK3/RCLK3
TCLK4/RCLK4
TmD1/RmD 1
TmD2/RmD 2
TmD3/RmD 3
TmD4/RmD 4
TmCLK/RmCLK
ACS406CS
RPOS1/RNEG1
RPOS2/RNEG2
RPOS3/RNEG3
RPOS4/RNEG4
TPOS1/TNEG1
TPOS2/TNEG2
TPOS3/TNEG3
TPOS4TNEG4
RCLK1/TCLK1
RCLK2/TCLK2
RCLK3/TCLK3
RCLK4/TCLK4
RmD1/TmD1
RmD2/TmD2
RmD3/TmD3
RmD4/TmD4
RmCLK/Tm CL K
ACS406CS
LIU/Framer
LIU/Framer
ACS406CS
4 x E1/T1 Fiber Mux
HFHF
TransmitterTransmitter
HFHF
ReceiverReceiver
MicroMicro--controllercontroller
DSP
DSP
MemoryMemory
Radio Base Station
Up to 4 x E1/T1 + maintenance
Single fiber link up to 25km
Laser Duplex
Device
ACS406CS
Fiber Optic
Modem/
Transceiver
Loading...