Datasheet 8413401FA Datasheet (Texas Instruments)

SN54ALS153, SN74ALS153, SN74AS153

DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDAS206A – APRIL 1982 – REVISED DECEMBER 1994

Copyright  1994, Texas Instruments Incorporated

1

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

• Permit Multiplexing From n Lines to

One Line

• Perform Parallel-to-Serial Conversion

• Strobe (Enable) Line Provided for

Cascading (n Lines to n Lines)

• ′ALS253 and SN74AS253A Are 3-State

Versions of These Parts

• Package Options Include Plastic

Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs

description

These dual 1-of-4 data selectors/multiplexers contain inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate strobe (G

) inputs are provided for each

of the two 4-line sections. The SN54ALS153 is characterized for operation

over the full military temperature range of –55°C to 125°C. The SN74ALS153 and SN74AS153 are characterized for operation from 0°C to 70°C.

FUNCTION TABLE

INPUTS

SELECT DATA

STROBE

OUTPUT

B A C0 C1 C2 C3

G

Y

X X X X X X H L L LLXXX L L LLHXXX L H LHXLXX L L LHXHXX L H HLXXLX L L HLXXHX L H HHXXXL L L HHXXXH L H

Select inputs A and B are common to both sections.

SN54ALS153 ...J PACKAGE

SN74ALS153, SN74AS153 ...D OR N PACKAGE

(TOP VIEW)

3212019

910111213

4 5 6 7 8

18 17 16 15 14

A 2C3 NC 2C2 2C1

1C3 1C2

NC 1C1 1C0

SN54ALS153 . . . FK PACKAGE

(TOP VIEW)

B1GNC

2Y

2C0

2G

1Y

GND

NC

NC – No internal connection

V

CC

1 2 3 4 5 6 7 8

16 15 14 13 12 11 10

9

1G

B 1C3 1C2 1C1 1C0

1Y

GND

V

CC

2G A 2C3 2C2 2C1 2C0 2Y

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

SN54ALS153, SN74ALS153, SN74AS153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDAS206A – APRIL 1982 – REVISED DECEMBER 1994

2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

logic symbol

†

G

MUX

0 3

0

14

A

1

2

B

EN

1

15

1Y

7

0

6

1C0

1

5

1C1

2

4

1C2

3

1C3

10

2C0

11

2C1

12

2C2

13

2C3

2Y

9

1G

2G

†

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

Pin numbers shown are for the D, J, and N packages.

logic diagram (positive logic)

Data 2

Select

Data 1

2G

2C3

2C2

2C1

2C0

A

B

1C3

1C2

1C1

1C0

1G

1Y

1

6

5

4

3

2

14

10

11

12

13

15

7

2Y

9

Pin numbers shown are for the D, J, and N packages.

SN54ALS153, SN74ALS153, SN74AS153

DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDAS206A – APRIL 1982 – REVISED DECEMBER 1994

3

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

†

Supply voltage, V

CC

7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage, V

I

7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, T

A

: SN54ALS153 –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SN74ALS153 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

†

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

recommended operating conditions

SN54ALS153 SN74ALS153

MIN NOM MAX MIN NOM MAX

UNIT

V

CC

Supply voltage 4.5 5 5.5 4.5 5 5.5 V

V

IH

High-level input voltage 2 2 V

V

IL

Low-level input voltage 0.7 0.8 V

I

OH

High-level output current –1 –2.6 mA

I

OL

Low-level output current 12 24 mA

T

A

Operating free-air temperature –55 125 0 70 °C

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

SN54ALS153 SN74ALS153

PARAMETER

TEST CONDITIONS

MIN TYP‡MAX MIN TYP‡MAX

UNIT

V

IK

VCC = 4.5 V, II = –18 mA –1.5 –1.5 V VCC = 4.5 V to 5.5 V, IOH = –0.4 mA VCC –2 VCC –2

V

OH

IOH = –1 mA 2.4 3.3

V

CC

=

4.5 V

IOH = –2.6 mA 2.4 3.2 IOL = 12 mA 0.25 0.4 0.25 0.4

V

OL

V

CC

= 4.5

V

IOL = 24 mA 0.35 0.5

V

I

VCC = 5.5 V, VI = 7 V 0.1 0.1 mA

I

IH

VCC = 5.5 V, VI = 2.7 V 20 20 µA

I

IL

VCC = 5.5 V, VI = 0.4 V –0.1 –0.1 mA

I

O

§

VCC = 5.5 V, VO = 2.25 V –20 –112 –30 –112 mA

I

CC

VCC = 5.5 V, All inputs at 4.5 V 7.5 14 7.5 14 mA

‡

All typical values are at VCC = 5 V, TA = 25°C.

§

The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.

SN54ALS153, SN74ALS153, SN74AS153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDAS206A – APRIL 1982 – REVISED DECEMBER 1994

4

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

switching characteristics (see Figure 1)

PARAMETER

FROM

(

INPUT

)

TO

(

OUTPUT

)

VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω

,

TA = MIN to MAX

†

UNIT

(INPUT)

(OUTPUT)

SN54ALS153 SN74ALS153

MIN MAX MIN MAX

t

PLH

5 29 5 21

t

PHL

A or B

Y

5 27 5 21

ns

t

PLH

Data

3 15 3 10

t

PHL

(any C)

Y

2 18 4 15

ns

t

PLH

5 27 5 18

t

PHL

G

Y

3 22 5 18

ns

†

For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

‡

Supply voltage, V

CC

7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage, V

I

7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, T

A

: SN74AS153 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

‡

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

recommended operating conditions

SN74AS153

MIN NOM MAX

UNIT

V

CC

Supply voltage 4.5 5 5.5 V

V

IH

High-level input voltage 2 V

V

IL

Low-level input voltage 0.8 V

I

OH

High-level output current –15 mA

I

OL

Low-level output current 48 mA

T

A

Operating free-air temperature 0 70 °C

SN54ALS153, SN74ALS153, SN74AS153

DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDAS206A – APRIL 1982 – REVISED DECEMBER 1994

5

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

SN74AS153

PARAMETER

TEST CONDITIONS

MIN TYP†MAX

UNIT

V

IK

VCC = 4.5 V, II = –18 mA –1.2 V VCC = 4.5 V to 5.5 V, IOH = –2 mA VCC –2

V

OH

VCC = 4.5 V, IOH = –15 mA 2.4 3.2

V

OL

VCC = 4.5 V, IOL = 48 mA 0.35 0.5 V

A, B

0.2

I

All others

V

CC

= 5.5 V,

V

I

= 7

V

0.1

mA

A, B

40

I

IH

All others

V

CC

=

5.5 V

,

V

I

=

2.7 V

20

µ

A

A, B

–1

I

IL

All others

V

CC

= 5.5 V,

V

I

= 0.4

V

–0.5

mA

I

O

‡

VCC = 5.5 V, VO = 2.25 V –30 –112 mA

I

CCH

VCC = 5.5 V 16 26 mA

I

CCL

VCC = 5.5 V 21 33 mA

†

All typical values are at VCC = 5 V, TA = 25°C.

‡

The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.

switching characteristics (see Figure 1)

PARAMETER

FROM

(

INPUT

)

TO

(

OUTPUT

)

VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω

,

TA = MIN to MAX

§

UNIT

(INPUT)

(OUTPUT)

SN74AS153

MIN MAX

t

PLH

3 12.5

t

PHL

A or B

Y

3 11

ns

t

PLH

Data

2 7

t

PHL

(any C)

Y

2 8

ns

t

PLH

3 11.5

t

PHL

G

Y

10 9

ns

§

For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.

SN54ALS153, SN74ALS153, SN74AS153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDAS206A – APRIL 1982 – REVISED DECEMBER 1994

6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PARAMETER MEASUREMENT INFORMATION

SERIES 54ALS/74ALS AND 54AS/74AS DEVICES

t

PHZ

t

PLZ

t

PHL

t

PLH

0.3 V

t

PZL

t

PZH

t

PLH

t

PHL

LOAD CIRCUIT

FOR 3-STATE OUTPUTS

From Output

Under Test

Test Point

R1

S1

C

L

(see Note A)

7 V

1.3 V

1.3 V1.3 V

3.5 V

0.3 V

t

h

t

su

VOLTAGE WAVEFORMS

SETUP AND HOLD TIMES

Timing

Input

Data

Input

1.3 V 1.3 V

3.5 V

0.3 V

High-Level

Pulse

Low-Level

Pulse

t

w

VOLTAGE WAVEFORMS

PULSE DURATIONS

Input

Out-of-Phase

Output

(see Note C)

1.3 V 1.3 V

1.3 V1.3 V

1.3 V 1.3 V

1.3 V1.3 V

1.3 V

3.5 V

0.3 V

V

OL

V

OH

V

OH

V

OL

Output

Control

(low-level

enabling)

Waveform 1

S1 Closed

(see Note B)

Waveform 2

S1 Open

(see Note B)

[

0 V

V

OH

V

OL

[

3.5 V

In-Phase

Output

0.3 V

1.3 V 1.3 V

VOLTAGE WAVEFORMS

PROPAGATION DELAY TIMES

VOLTAGE WAVEFORMS

ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS

R2

V

CC

R

L

Test Point

From Output

Under Test

C

L

(see Note A)

LOAD CIRCUIT

FOR OPEN-COLLECTOR OUTPUTS

LOAD CIRCUIT FOR

BI-STATE

TOTEM-POLE OUTPUTS

From Output

Under Test

Test Point

C

L

(see Note A)

R

L

RL = R1 = R2

NOTES: A. CL includes probe and jig capacitance.

B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.

Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement.

Figure 1. Load Circuits and Voltage Waveforms

IMPORTANT NOTICE

T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.

CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICA TIONS IS UNDERST OOD TO BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.