Datasheet 74LV153PW, 74LV153DB, 74LV153D Datasheet (Philips)

Download

Page 1

INTEGRATED CIRCUITS

74LV153

Dual 4-input multiplexer

Product specification Supersedes data of 1997 Feb 12 IC24 Data Handbook

 

1998 Apr 28

Page 2

Philips Semiconductors Product specification

74L V153Dual 4-input multiplexer

FEA TURES

•Optimized for low voltage applications: 1.0 to 3.6 V

•Accepts TTL input levels between V

•Typical V

amb

•Typical V

amb

(output ground bounce) < 0.8 V at V

OLP

= 25°C

(output VOH undershoot) > 2 V at V

OHV

= 25°C

= 2.7 V and V

= 3.3 V,

•Non-inverting outputs

•Separate enable for each output

•Common select inputs

•Permits multiplexing from n lines to 1 line

•Enable line provided for cascading (n lines to 1 line)

•Output capability: standard

•I

category: MSI

QUICK REFERENCE DATA

GND = 0 V; T

SYMBOL

NOTE:

1. C

is used to determine the dynamic power dissipation (PD in µW)

= CPD × V

= input frequency in MHz; CL = output load capacitance in pF;

= output frequency in MHz; VCC = supply voltage in V;

 (C

= 25°C; tr = t

amb

PHL/tPLH

× fi  (CL × V

× V

× fo) = sum of the outputs.

≤ 2.5 ns

PARAMETER CONDITIONS TYPICAL UNIT

Propagation delay 1ln, 2ln to nY Sn to nY nE to nY

Input capacitance 3.5 pF Power dissipation capacitance per gate VI = GND to V

× fo) where:

= 3.6 V

DESCRIPTION

The 74LV153 is a low-voltage CMOS device that is pin and function compatible with 74HC/HCT153.

The 74LV153 is a dual 4-input multiplexer which selects 2 bits of data from up to four sources selected by common data select inputs

, S1). The two 4-input multiplexer circuits have individual active

LOW output enable inputs (1E outputs independently. The outputs (1Y, 2Y) are forced LOW when the corresponding output enable inputs are HIGH. The 74LV153 is the logic implementation of a 2-pole, 4-position switch, where the position of the switch, is determined by the logic levels applied to S and S1. The logic equations for the outputs are: 1Y=1E

.(1l0.S1.S0+1l1.S1.S0+1l2.S1.S0+1l3.S1.S0) .(2l0.S1.S0+2l1.S1.S0+2l2.S1.S0+2l3.S1.S0)

2Y=2E The 74LV153 can be used to move data to a common output bus

from a group of registers. The state of the select inputs would determine the particular register from which the data came. An alternative application is a function generator. The device can generate two functions or three variables. This is useful for implementing highly irregular random logic.

CL = 15 pF; VCC = 3.3 V

, 2E) which can be used to strobe the

14 14 10

30 pF

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. #

16-Pin Plastic DIL –40°C to +125°C 74LV153 N 74LV153 N SOT38-4 16-Pin Plastic SO –40°C to +125°C 74LV153 D 74LV153 D SOT109-1 16-Pin Plastic SSOP Type II –40°C to +125°C 74LV153 DB 74LV153 DB SOT338-1 16-Pin Plastic TSSOP Type I –40°C to +125°C 74LV153 PW 74LV153PW DH SOT403-1

1998 Apr 28 853–1921 19309

Page 3

Philips Semiconductors Product specification

Dual 4-input multiplexer

PIN CONFIGURATION

GND

PIN DESCRIPTION

NUMBER

1, 15 1E, 2E Output enable inputs (active LOW) 14, 2 S0, S 6, 5, 4, 3 1l0 to 1l 7 1Y Multiplexer output from source 1 8 GND Ground (0 V) 9 2Y Multiplexer output from source 2 10, 11, 12, 13 2l0 to 2l 16 V

SYMBOL FUNCTION

Common data select inputs Data inputs from source 1

Data inputs from source 2

Positive supply voltage

LOGIC SYMBOL

65 43

1l01l11l21302l02l12l22l

14 2 1 15

1E 2E

1Y 2Y

SV00538

10 11 12 13

LOGIC SYMBOL (IEEE/IEC)

EN4

2 3

0 3

MUX

FUNCTIONAL DIAGRAM

MUX

74LV153

SV00539

SV00540

1998 Apr 28

SV00537

Page 4

Philips Semiconductors Product specification

Dual 4-input multiplexer

LOGIC DIAGRAM

1Y 2Y

74LV153

SV00541

FUNCTION TABLE

SELECT INPUTS DATA INPUTS OUTPUT ENABLE OUTPUT

X X X X X X H L L L L X X X L L L L H X X X L H H L X L X X L L H L X H X X L H L H X X L X L L L H X X H X L H H H X X X L L L H H X X X H L H

NOTES:

H = HIGH voltage level L = LOW voltage level X = don’t care

nE nY

1998 Apr 28

Page 5

Philips Semiconductors Product specification

Dual 4-input multiplexer

74LV153

RECOMMENDED OPERATING CONDITIONS

SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT

amb

tr, t

NOTE:

1. The LV is guaranteed to function down to V

ABSOLUTE MAXIMUM RATINGS

In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0 V).

SYMBOL

I

DC supply voltage See Note 1 1.0 3.3 3.6 V

Input voltage 0 – V

Output voltage 0 – V

Operating ambient temperature range in free air

Input rise and fall times

See DC and AC

characteristics

VCC = 1.0V to 2.0V VCC = 2.0V to 2.7V VCC = 2.7V to 3.6V

= 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 3.6V.

–40 –40

– – –

1, 2

PARAMETER CONDITIONS RATING UNIT

DC supply voltage –0.5 to +4.6 V DC input diode current VI < –0.5 or VI > VCC + 0.5V 20 mA

DC output diode current VO < –0.5 or VO > VCC + 0.5V 50 mA

DC output source or sink current

– standard outputs

–0.5V < VO < VCC + 0.5V

CC CC

+85

+125

500 200 100

ns/V

V V

°C

I

GND

TOT

stg

DC VCC or GND current for types with

– standard outputs 50

Storage temperature range –65 to +150 °C Power dissipation per package

– plastic DIL – plastic mini-pack (SO) – plastic shrink mini-pack (SSOP and TSSOP)

for temperature range: –40 to +125°C above +70°C derate linearly with 12 mW/K above +70°C derate linearly with 8 mW/K above +60°C derate linearly with 5.5 mW/K

750 500 400

NOTES:

1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability .

2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

1998 Apr 28

Page 6

Philips Semiconductors Product specification

voltage

Dual 4-input multiplexer

DC ELECTRICAL CHARACTERISTICS

Over recommended operating conditions. V oltages are referenced to GND (ground = 0 V).

SYMBOL P ARAMETER TEST CONDITIONS

VCC = 1.2 V 0.9 0.9

HIGH level Input

VCC = 2.0 V 1.4 1.4 VCC = 2.7 to 3.6 V 2.0 2.0 VCC = 1.2 V 0.3 0.3

LOW level Input

VCC = 2.0 V 0.6 0.6 VCC = 2.7 to 3.6 V 0.8 0.8

HIGH level output

voltage; all outputs

VCC = 1.2 V; VI = VIH or V VCC = 2.0 V; VI = VIH or V VCC = 2.7 V; VI = VIH or V VCC = 3.0 V; VI = VIH or V

IL; IL; IL; IL;

HIGH level output

voltage; STANDARD

VCC = 3.0 V; VI = VIH or V

IL;

outputs

LOW level output

voltage; all outputs

VCC = 1.2 V; VI = VIH or V VCC = 2.0 V; VI = VIH or V VCC = 2.7 V; VI = VIH or V VCC = 3.0 V; VI = VIH or V

IL; IL; IL; IL;

LOW level output

voltage; STANDARD

VCC = 3.0 V; VI = VIH or V

IL;

outputs Input leakage

current

Quiescent supply current; MSI

VCC = 3.6 V; VI = VCC or GND 1.0 1.0 µA

VCC = 3.6 V; VI = VCC or GND; IO = 0 20.0 160 µA

Additional

quiescent supply current per input

VCC = 2.7 V to 3.6 V; VI = VCC – 0.6 V 500 850 µA

∆I

NOTE:

1. All typical values are measured at T

amb

= 25°C.

–IO = 100µA 1.2 –IO = 100µA 1.8 2.0 1.8 –IO = 100µA 2.5 2.7 2.5 –IO = 100µA 2.8 3.0 2.8

–IO = 6mA 2.40 2.82 2.20 V

IO = 100µA 0 IO = 100µA 0 0.2 0.2 IO = 100µA 0 0.2 0.2 IO = 100µA 0 0.2 0.2

IO = 6mA 0.25 0.40 0.50 V

-40°C to +85°C -40°C to +125°C

MIN TYP

LIMITS

MAX MIN MAX

74LV153

UNIT

1998 Apr 28

Page 7

Philips Semiconductors Product specification

CONDITION

nY;

Figures 1, 2

Dual 4-input multiplexer

AC CHARACTERISTICS

GND = 0V; tr = tf = 2.5ns; CL = 50pF; RL =KΩ

SYMBOL PARAMETER WAVEFORM

Propagation delay

PHL/tPLH

NOTES:

1. Unless otherwise stated, all typical values are measured at T

2. Typical values are measured at V

;

to nY

Propagation delay Sn to nY

Propagation delay nE to nY

= 3.3 V.

LIMITS

–40 to +85 °C –40 to +125 °C

VCC(V) MIN TYP

MAX MIN MAX

1.2 85

2.0 29 56 66

2.7 21 41 49

3.0 to 3.6 16

33 39

1.2 90

2.0 31 58 70

2.7 23 43 51

3.0 to 3.6 17

34 41

1.2 60

2.0 20 39 46

2.7 15 29 34

3.0 to 3.6 11

= 25°C

amb

23 27

74LV153

UNIT

AC WAVEFORMS

VM = 1.5 V at VCC ≥ 2.7 V;

= 0.5 V × VCC at VCC < 2.7 V;

and VOH are the typical output voltage drop that occur with the

output load.

1In, 2I

INPUT

GND

nY OUTPUT

Figure 1. Input (1ln, 2ln) to output (1Y, 2Y)

Sn, nE INPUT

GND

PHL

nY OUTPUT

Figure 2. Select input (S0, S1) and the output enable input (E)

to output (nY

PHL

propagation delays.

) propagation delays.

PLH

SV00542

PLH

SV00543

TEST CIRCUIT

PULSE

GENERATOR

DEFINITIONS

RL = Load resistor C

= Load capacitance includes jig and probe capacitance

RT = Termination resistance should be equal to Z

TEST

PLH/tPHL

Figure 3. Load circuitry for switching times.

D.U.T.

Test Circuit for switching times

< 2.7V V

2.7–3.6V 2.7V

50pF

of pulse generators.

OUT

RL = 1k

SV00901

1998 Apr 28

Page 8

Philips Semiconductors Product specification

Dual 4-input multiplexer

DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4

74LV153

1998 Apr 28

Page 9

Philips Semiconductors Product specification

Dual 4-input multiplexer

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

74LV153

1998 Apr 28

Page 10

Philips Semiconductors Product specification

Dual 4-input multiplexer

SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1

74LV153

1998 Apr 28

Page 11

Philips Semiconductors Product specification

Dual 4-input multiplexer

TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1

74LV153

1998 Apr 28

Page 12

Philips Semiconductors Product specification

Dual 4-input multiplexer

74LV153

NOTES

1998 Apr 28

Page 13

Philips Semiconductors Product specification

Dual 4-input multiplexer

74LV153

NOTES

1998 Apr 28

Page 14

Philips Semiconductors Product specification

Dual 4-input multiplexer

74LV153

DEFINITIONS

Data Sheet Identification Product Status Definition

Objective Specification

Preliminary Specification

Product Specification

Formative or in Design

Preproduction Product

Full Production

This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice.

This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.

This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.

Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

LIFE SUPPORT APPLICA TIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected

to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.

Philips Semiconductors 811 East Arques Avenue

 Copyright Philips Electronics North America Corporation 1998

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381

print code Date of release: 05-96 Document order number: 9397-750-04425

 

1998 Apr 28