Datasheet 74F86SCX, 74F86SC, 74F86PC, 74F86CW, 74F86SJX Datasheet (Fairchild Semiconductor)
...Page 1
© 1999 Fairchild Semiconductor Corporation DS009470 www.fairchildsemi.com
April 1988
Revised July 1999
74F86 2-Input Exclusive-OR Gate
74F86
2-Input Exclusive-OR Gate
General Description
This device contains four independent gates, each of which
performs the logic exclusive-OR function.
Ordering Code:
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the orderi ng code.
Logic Symbol
IEEE/IEC
Connection Diagram
Unit Loading/Fan Out
Order Number Package Number Package Description
74F86SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
74F86SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74F86PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Pin Names Description
U.L. Input I
IH/IIL
HIGH/LOW Output IOH/I
OL
An, B
n
Inputs 1.0/1.0 20 µA/−0.6 mA
O
n
Outputs 50/33.3 −1 mA/20 mA
Page 2
www.fairchildsemi.com 2
74F86
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
Note 1: Absolute maximum ratings are values beyond which the device
may be damaged or have its useful life impaired. Functional operation
under these conditions is not implied.
Note 2: Either voltage lim it or current limit is sufficient to protect inputs.
DC Electrical Characteristics
AC Electrical Characteristics
Storage Temperature −65°C to +150°C
Ambient Temperature under Bias −55°C to +125°C
Junction Temperature under Bias −55°C to +150°C
V
CC
Pin Potential to Ground Pin −0.5V to +7.0V
Input Voltage (Note 2) −0.5V to +7.0V
Input Current (Note 2) −30 mA to +5.0 mA
Voltage Applied to Output
in HIGH State (with V
CC
= 0V)
Standard Output −0.5V to V
CC
3-STATE Output −0.5V to +5.5V
Current Applied to Output
in LOW State (Max) twice the rated I
OL
(mA)
Free Air Ambient Temperature 0°C to +70°C
Supply Voltage +4.5V to +5.5V
Symbol Parameter Min Typ Max Units
V
CC
Conditions
V
IH
Input HIGH Voltage 2.0 V Recognized as a HIGH Signal
V
IL
Input LOW Voltage 0.8 V Recognized as a LOW Signal
V
CD
Input Clamp Diode Voltage −1.2 V Min IIN = −18 mA
V
OH
Output HIGH Voltage 10% V
CC
2.5
VMin
IOH = −1 mA
5% V
CC
2.7 IOH = −1 mA
V
OL
Output LOW Voltage 10% V
CC
0.5 Min IOL = 20 mA
I
IH
Input HIGH Current 5.0 µAMaxVIN = 2.7V
I
BVI
Input HIGH Current Breakdown Test 7.0 µAMaxVIN = 7.0V
I
CEX
Output HIGH Leakage Current 50 µAMaxV
OUT
= V
CC
V
ID
Input Leakage Test
4.75 V 0.0
IID = 1.9 µA
All other pins grounded
I
OD
Output Leakage Circuit Current
3.75 µA0.0
V
IOD
= 150 mV
All other pins grounded
I
IL
Input LOW Current −0.6 mA Max VIN = 0.5V
I
OS
Output Short-Circuit Current −60 −150 mA Max V
OUT
= 0V
I
CCH
Power Supply Current 12 18 mA Max VO = HIGH
I
CCL
Power Supply Current 18 28 mA Max VO = LOW
Symbol Parameter
TA = +25°CT
A
= 0°C to +70°C
Units
VCC = +5.0V VCC = +5.0V
CL = 50 pF CL = 50 pF
Min Typ Max Min Max
t
PLH
Propagation Delay 3.0 4.0 5.5 3.0 6.5
t
PHL
An, Bn to O
n
3.0 4.2 5.5 3.0 6.5 ns
(Other Input LOW)
t
PLH
Propagation Delay 3.5 5.3 7.0 3.5 8.0
t
PHL
An, Bn to O
n
3.0 4.7 6.5 3.0 7.5 ns
(Other Input HIGH)
Page 3
3 www.fairchildsemi.com
74F86
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
Package Number M14A
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D
Page 4
www.fairchildsemi.com 4
74F86 2-Input Exclusive-OR Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N14A
Fairchild does no t assume any responsibility for use of an y circuitry d escribed, no c ircuit patent l icenses are impl ied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a sig nificant injury to the
user.
2. A critical com ponen t in any com pone nt of a life s upport
device or system w hose fa ilure to perform can be r easonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
Loading...