Datasheet 67-21SUBC/S400-A4 Specification

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet
TOP View LEDs

Features

․P-LCC-2 package.

․White package.
․Optical indicator.

․Colorless clear window.
․Wide viewing angle.
․Suitable for vapor-phase reflow, Infrared reflow

and wave solder processes.

․Computable with automatic placement equipment.
․Available on tape and reel (8mm Tape).
․Pb-free.
․The product itself will remain within RoHS compliant

version.

Descriptions

․The 67-21 series is available in soft orange, green,

blue and yellow. Due to the package design, the
LED has wide viewing angle and optimized light
coupling by inter reflector. This feature makes the
SMT TOP LED ideal for light pipe application.
The low current requirement makes this device
ideal for portable equipment or any other
application where power is at a premium.

Applications

․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․Light pipe application.

․General use.

67-21SUBC/S400-XX/TR8

Device Selection Guide

Chip

Lens Color

Material Emitted Color

InGaN Super Blue Water Clear

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 1 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

EVERLIGHT ELECTRONICS CO.,LTD.

Package Dimensions

67-21SUBC/S400-XX/TR8

Notes: .All dimensions are in millimeters ,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 2 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

EVERLIGHT ELECTRONICS CO.,LTD.

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

67-21SUBC/S400-XX/TR8

Operating Temperature Topr -40 ~ +85

Storage Temperature Tstg -40 ~ +90

Electrostatic Discharge ESD 150 V

Power Dissipation Pd 110 mW

Peak Forward Current

IFP 100 mA

(Duty 1/10 @1KHz)

Reflow Soldering : 260 ℃ for 10 sec.

Soldering Temperature Tsol

Hand Soldering : 350 ℃ for 3 sec.

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol

Luminous Intensity

Iv

*Chip

Min. Typ. Max. Unit Condition

Rank.

A3 32.0 38.0

A4 42.5 48.0

A5 53.0 58.5

A6 64.0 70.5

----- mcd IF=20mA

℃

℃

X7 75.0 80.5

X8 88.0 100.0

X9 105 135

Viewing Angle

Peak Wavelength λp ----- ----- 468 ----- nm IF=20mA

Dominant

Wavelength

Spectrum Radiation

Bandwidth

Forward Voltage

Reverse Current IR ----- ----- ----- 50

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 3 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

2θ1/2

λd ----- ----- 470 ----- nm IF=20mA

∆λ ----- ----- 35 ----- nm IF=20mA

VF

----- ----- 120 ----- deg IF=20mA

----- ----- 3.5 4.3

V IF=20mA

μA

VR=5V

EVERLIGHT ELECTRONICS CO.,LTD.

Typical Electro-Optical Characteristics Curves

67-21SUBC/S400-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 4 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

EVERLIGHT ELECTRONICS CO.,LTD.

Label explanation

CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank

67-21SUBC/S400-XX/TR8

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 5 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

EVERLIGHT ELECTRONICS CO.,LTD.

67-21SUBC/S400-XX/TR8

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.

Note: The tolerances unless mentioned is ±0.1mm , Unit = mm

Moisture Resistant Packaging

Label

Aluminum moisture-proof bag

Desiccant Label

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 6 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

EVERLIGHT ELECTRONICS CO.,LTD.

67-21SUBC/S400-XX/TR8

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.
Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles

Temp. : 260℃±5℃

1 Reflow Soldering

Min. 5sec.

6 Min.

H : +100℃ 15min

2 Temperature Cycle

∫ 5 min

300 Cycles

L : -40℃ 15min

H : +100℃ 5min

3 Thermal Shock

∫ 10 sec

300 Cycles

L : -10℃ 5min

4

High Temperature

Temp. : 100℃

1000 Hrs.

Storage

5

Low Temperature

Temp. : -40℃

1000 Hrs.

Storage

6 DC Operating Life IF = 20 mA

1000 Hrs.

Sample

Ac/Re

Size

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

7

High Temperature /

85℃/ 85%RH

1000 Hrs.

22 PCS. 0/1

High Humidity

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 7 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

EVERLIGHT ELECTRONICS CO.,LTD.

67-21SUBC/S400-XX/TR8

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals,

and do soldering of each terminal. Be careful because the damage of the product is often started at

the time of the hand solder.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 8 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett

EVERLIGHT ELECTRONICS CO.,LTD.

67-21SUBC/S400-XX/TR8

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: [phone]
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: [phone]
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 9 of 9

Device No. : DSE-671-214 prepared date:07-29-2005 Prepared by: Bennett