Page 1
SW-600H-600NH-1801
600H-600NH
series
Toggle switches • high amperage
DISTINCTIVE FEATURES
Robust mechanism
High current/voltage rating
Insulated or metal lever
UL, CSA and NF-VDE (EN 61058-1) approved
ELECTRICAL SPECIFICATIONS
• Max. current/voltage ratings : see tables below
• Peak current : 30 A max. during 1/2 sine, 250 VAC
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
2,000 Vrms 50 Hz min. between terminals
2,500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10,000 cycles at full load
Models Functions
Single and
double pole
Three pole
Functions Ratings Electrical life
ON - OFF
ON - ON
ON OFF ON
Other
Max. current/voltage rating w. resistive load
APPROVED RATINGS
ON - OFF (1)
ON - ON (6)
Other
(4-5-7-8-9)
ON - OFF (1)
& ON - ON (6)
Other
(4-5-7-8-9)
FOR INFORMATION
15 A 250 VAC
10 A 24 VDC
15 A 12 VDC
15 A 250 VAC
5 A 24 VDC
15 A 125 VAC
12 A 250 VAC
5 A 24 VDC
UL CSA NF-VDE
UL 1054 CSA 22-2 EN 61058-1
15 A 1/2 HP
125-250 VAC
10 A 1/2 HP
125-250 VAC
15 A 1/2 HP
125-250 VAC
10 A 1/2 HP
125-250 VAC
600H - 600NH
10,000 cycles
6,000 cycles
10,000 cycles
10,000 cycles
10(4) A
400 VAC
T 85/55 (600H)
T 125/55
(600NH)
PANEL SWITCHES
The company reserves the right to change specifications without notice.
1
Page 2
600H-600NH series
Toggle switches • high amperage
PANEL SWITCHES
GENERAL SPECIFICATIONS
• Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 4.5 mm (.177) max. between 2 nuts
• Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F)
MATERIALS
• Case : polyester UL94-V0
• Actuator :
- 600H : brass, nickel plated
- 600NH : black polyamide
• Bushing : brass, nickel plated
• Contacts : silver/nickel alloy
APEM products may be recycled at end-of-life for the re-claiming of valuable metal
components.
AGENCY APPROVALS
TERMINALS
600H/2 & 600NH/2
ELECTRICAL FUNCTIONS
KEYWAY
600H & 600NH
EN 61058-1EN 61058-1
Availability : see chart on previous page.
Marking : approved models are standard marked.
PANEL CUT-OUT
2
Page 3
BUILD YOUR PART NUMBER
6
600H-600NH series
Toggle switches • high amperage
PANEL SWITCHES
BASIC PART NUMBER
SERIES
T
K
L
LUXE
TKLUXE
G
GK
G-038
NUMBER OF POLES
Single pole
3
Double pole
4
Three pole
5
For 4 pole, see 660
series.
ELECTRICAL FUNCTIONS
1
5
6
7
8
9
4
Must not have blank in
"momentary" box.
OPTIONS
For models with metal lever only
Tropicalized case
Front panel sealing
Bushing 16 mm (.629)
Chrome finish
Front panel sealing + T and LUXE
Black finish
Black finish + front panel sealing
Black finish + uminous tip on lever
ON - OFF
MOM - ON
ON - ON
MOM OFF MOM
ON OFF MOM
ON OFF ON
ON
ON
MOM
ON
ON
ON
ON
MOM
MOM
OPTIONS
FOR 600H SERIES ONLY
-1V
-2V
-3V
ACTUATOR AND TERMINALS
Metal lever, screw terminals
H
Metal lever, solder lug/quick-
H/2
connect terminals *
Metal lever, normalized
H/3
quick-connect terminals
Insulated lever, screw
NH
terminals
NH/2
NH/3
* On request
LOCKING LEVERS
1 locked position
2 locked positions
3 locked positions
Insulated lever, solder lug/
quick-connect terminals
Insulated lever, normalized
quick-connect terminals *
MOMENTARY
ON ON MOM
-1R
MOM ON MOM
-2R
.
ACTUATOR OPTIONS
30 mm (1.181) long actuator
-4
40 mm (1.574) long actuator
-5
Retro style actuator
-6
X2595
Ergonomic flat plastic
actuator
ABOUT THIS SERIES
On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart.
Notice : please note that not all combinations of above numbers are available. Refer to following pages for further information.
Switch guards are available to prevent inadvertent lever operation. See "Switch Guards" section on website.
Sealing boots are available on 600H series to protect the switches against dust and water. See "Sealing Boots" section of website.
Mounting accessories : standard hardware supplied with all models :
- 600H and series : 1 hex nut U166 and 1 knurled nut U411
- 600NH series : 1 hex nut U166 and 1 knurled nut U522
3
Page 4
600H-600NH series
29.70
31.80
29.50
0.80x6.35
(.031x.25)
0.80
29.50
(.279)
Toggle switches • high amperage
PANEL SWITCHES
METAL LEVER - SINGLE POLE
Solder lug Screw
631H/2 631H 30° ON - OFF
635H/2 635H 26° MOM - ON
636H/2 636H 30° ON - ON
637H/2 637H 30° MOM OFF MOM
638H/2 638H 36° ON OFF MOM
639H/2 639H 36° ON OFF ON
METAL LEVER - DOUBLE POLE
Solder lug Screw
641H/2 641H 26° ON - OFF
644H/2 644H* 33° ON ON ON
644H/2-1R 644H-1R* 33° ON ON MOM
644H/2-2R 644H-2R* 33° MOM ON MOM
645H/2 645H 26° MOM - ON
646H/2 646H 26° ON - ON
647H/2 647H 26° MOM OFF MOM
648H/2 648H 26° ON OFF MOM
649H/2 649H 32° ON OFF ON
KEYWAY
14.00
III
2-1
II I
2-3
(.551)
A
1
2
(1.161)
3
A = Angle of throw
17.50 10.50 15.00 11.00
I
II
A
III
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
(.433)(.59)(.413)(.689)
(.586)
7.10 14.90
Angle of throw with K sealing option :
functions 1, 5, 6, 7 : 26° - functions 8, 9 : 32°
III
2-1
5-4
II I
2-3
5-6
A
KEYWAY
21.50 11.0021.4010.5017.50
(.846)
A1
A2
(1.169)
A3
11.00
(.433)
B4
B5
B6
(.689) (.413) (.846) (.433)
I
II
A
III
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
0.80
(.031)
14.656.80
(.578)(.267)
* Function 4 : SP in DP case - see "Technical information" on website
METAL LEVER - THREE POLE
Solder lug Screw
651H/2 651H 24° ON - OFF
655H/2 655H 15° MOM - ON
656H/2 656H 24° ON - ON
657H/2 657H 24° MOM OFF MOM
658H/2 658H 24° ON OFF MOM
659H/2 659H 28° ON OFF ON
A
INSULATED LEVER - SINGLE POLE
Solder lug Screw
631NH/2 631NH 28° ON - OFF
635NH/2 635NH 24° MOM - ON
636NH/2 636NH 28° ON - ON
637NH/2 637NH 33° MOM OFF MOM
638NH/2 638NH 33° ON OFF MOM
639NH/2 639NH 33° ON OFF ON
A
III
2-1
5-4
8-7
III
2-1
II I
2-3
5-6
8-9
II I
2-3
KEYWAY
(1.252)
34.50
(1.358)
1
2
3
12.00 12.00
(.472)
4
5
6
(.472)
7
8
9
17.50 10.50 24.00 11.00
I
II
A
III
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
KEYWAY
(.551) (.531) (.453) (.59) (.433)
I
II
III
(1.161)
1
2
3
13.50 11.50 15.00 11.0014.00
A
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
(.433)(.949)(.413)(.689)
14.90
(.586)(.279)
7.10
0.80
(.031)
(.59)(.279)
15.007.10
4
Page 5
21.50
13.50 11.50 21.50 11.00
29.70
0.80x6.35
13.50
34.50
11.20 24.00
11.00
31.80
(.031x0.25)
0.80x6.35
600H-600NH series
Toggle switches • high amperage
INSULATED LEVER - DOUBLE POLE
Solder lug Screw
641NH/2 641NH 26° ON - OFF
644NH/2 644NH* 30° ON ON ON
644NH/2-1R 644NH-1R* 26° ON ON MOM
644NH/2-2R 644NH-2R* 26° MOM ON MOM
645NH/2 645NH 26° MOM - ON
646NH/2 646NH 26° ON - ON
647NH/2 647NH 26° MOM OFF MOM
648NH/2 648NH 30° ON OFF MOM
649NH/2 649NH 30° ON OFF ON
INSULATED LEVER - THREE POLE
Solder lug Screw
651NH/2 651NH 24° ON - OFF
655NH/2 655NH 15° MOM - ON
656NH/2 656NH 24° ON - ON
657NH/2 657NH 24° MOM OFF MOM
658NH/2 658NH 24° ON OFF MOM
659NH/2 659NH 28° ON OFF ON
A
III
2-1
5-4
II I
2-3
5-6
KEYWAY
(.846)
(.531) (.452) (.846) (.433)
PANEL SWITCHES
A
B4
B5
B6
7
8
9
I
II
A
III
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
I
II
A
III
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
(.531)
14.706.80
(.579)(.267)
(.433)
(.949)(.44)
14.90
(.586)(.279)
7.10
III
2-1
5-4
8-7
II I
2-3
5-6
8-9
A1
A2
(1.169)
A3
11.00
(.433)
* Function 4 : SP in DP case - see "Technical information" on website
KEYWAY
(1.358)
4
1
5
2
(1.252)
6
3
12.00 12.00
(.472)
(.472)
All models also available with normalized quick-connect terminals H/3 or NH/3.
OPTIONS
BASIC P/N
For 600H series only
T Tropicalized diallylphthalate case (-40 °C to +85 °C)
(-40 °F to +185 °F)
K Front panel sealing by 1 O-ring and sealing washer.
Protects the switch against water and dust. Panel
seal withstands 1 bar pressure and remains sealed
even when switch is operated
L Special threaded bushing, length 16 mm (.629)
LUXE Chrome plated lever and cap nut U117
TK LUXE Options T, K and LUXE.
G Black finish on bushing, lever and nuts. Includes
GK Option G + front panel sealing by O-ring and sealing
tropicalization (option T) and locking ring U12.
washer (as described in option K)
G-038 Option G + fluorescent tip on lever. White fluorescent
tip becomes luminous when submitted to ultra violet
rays.
GK
G-38
1
2
1
O-ring
Sealing washer
2
5
Page 6
600H-600NH series
10.50
2.80
(.236DIA)
Ø6.00
Toggle switches • high amperage
PANEL SWITCHES
BASIC P/N
For 600H series only
For 1 and 2 pole models.
For 3-pole models, refer to 6000 series.
KEYWAY
LOCKING LEVERS
11.90 19.40
(.763)(.468)
Ø11.90-32NS
(15/32''32NS)
-2V
2 locked positions
Ø11.90-32NS
(15/32''32NS)
-1V
1 locked position
ACTUATOR OPTIONS
BASIC P/N
For 600H series only
For 1 and 2 pole models.
-4 30 mm (1.181) long actuator
-5 40 mm ( 1.574) long actuator
-6 Retro style actuator (gold plated or chrome plated : on
request)
X2595 Ergonomic flat plastic actuator
19.4011.90
(.763)
(.468)
Ø6.00
30.00
(1.181)
(.236DIA)
40.00
(1.574)
Ø11.90-32NS
(15/32''32NS)
-3V
3 locked positions
Ø6.30
(.248DIA)
15.00
(.590)
(.811)(.468)
11.90 20.40
-4 -5 -6
(.110)
(.413)
26.30
(1.035)
X2595
6
Loading...