Datasheet 5KP90CA, 5KP90C, 5KP90A, 5KP90, 5KP85C Datasheet (SHANGHAI SUNRISE ELECTRONICS)
...Page 1
SHANGHAI SUNRISE ELECTRONICS CO., LTD.
µ
)
5KP5.0 THRU 5KP110CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:50-110V
PEAK PULSE POWER: 5000W
TECHNICAL
SPECIFICATION
FEATURES
R - 6
• 5000W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to V
BR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
o
265
C/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
Dimensions in inches and (millimeters)
• Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25oC ambient temperature unless otherwise specified)
RATINGS
Peak power dissipation (Note 1) Pppm Minimum 5000 W
Peak pulse reverse current (Note 1) Ippm See Table A
Steady state power dissipation (Note 2) Pm(av) 8.0 W
Peak forward surge current (Note 3)
Maximum instantaneous forward voltage at 100A
Operating junction and storage temperature range
Notes:
1. 10/1000
2. Tl=75
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types 5KP5.0 thru types 5KP110A
(e.g. 5KP7.5C,5KP110CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having V
4. Electrical characteristics apply in both directions.
S waveform non-repetitive current pulse, and derated above Ta=25oC
o
C, lead length 9.5mm, Mounted on copper pad area of (20×20mm
of 10 volts and less, the ID limit is doubled.
WM
SYMBOL VALUE UNITS
I
FSM
V
T
STG,TJ
F
400 A
3.5 V
-55 to + 175
o
C
http://www.sse-diode.com
Page 2
ELECTRICAL CHARACTERISTICS]
(
)
Device Type
5KP5.0
5KP5.0A
5KP6.0
5KP6.0A
5KP6.5
5KP6.5A
5KP7.0
5KP7.0A
5KP7.5
5KP7.5A
5KP8.0
5KP8.0A
5KP8.5
5KP8.5A
5KP9.0
5KP9.0A
5KP10
5KP10A
5KP11
5KP11A
5KP12
5KP12A
5KP13
5KP13A
5KP14
5KP14A
5KP15
5KP15A
5KP16
5KP16A
5KP17
5KP17A
5KP18
5KP18A
5KP20
5KP20A
5KP22
5KP22A
5KP24
5KP24A
5KP26
5KP26A
5KP28
5KP28A
5KP30
5KP30A
at T
Breakdown
Voltage
(Volts)
V
(BR)
(NOTE 1)
MIN MAX
6.40 7.30 50 5.0 5000 520 9.6 0.057
6.40 7.00 50 5.0 5000 543 9.2 0.057
6.67 8.15 50 6.0 5000 439 11.4 0.061
6.67 7.37 50 6.0 5000 485 10.3 0.061
7.22 8.82 50 6.5 2000 407 12.3 0.065
7.22 7.98 50 6.5 2000 447 11.2 0.065
7.78 9.51 50 7.0 1000 378 13.3 0.068
7.78 8.60 50 7.0 1000 417 12.0 0.068
8.33 10.2 5.0 7.5 250 350 14.3 0.073
8.33 9.21 5.0 7.5 250 388 12.9 0.073
8.89 10.9 5.0 8.0 150 333 15.0 0.075
8.89 9.83 5.0 8.0 150 367 13.6 0.075
9.44 11.5 5.0 8.5 50.0 314 15.9 0.078
9.44 10.4 5.0 8.5 50.0 347 14.4 0.078
10.0 12.2 5.0 9.0 20.0 295 16.9 0.081
10.0 11.1 5.0 9.0 20.0 325 15.4 0.081
11.1 13.6 5.0 10.0 15.0 266 18.8 0.084
11.1 12.3 5.0 10.0 15.0 294 17.0 0.084
12.2 14.9 5.0 11.0 10.0 249 20.1 0.086
12.2 13.5 5.0 11.0 10.0 274 18.2 0.086
13.3 16.3 5.0 12.0 10.0 227 22.0 0.088
13.3 14.7 5.0 12.0 10.0 251 19.9 0.088
14.4 17.6 5.0 13.0 10.0 210 23.8 0.090
14.4 15.9 5.0 13.0 10.0 232 21.5 0.090
15.6 19.1 5.0 14.0 10.0 194 25.8 0.092
15.6 17.2 5.0 14.0 10.0 215 23.2 0.092
16.7 20.4 5.0 15.0 10.0 188 26.9 0.094
16.7 18.5 5.0 15.0 10.0 206 24.4 0.094
17.8 21.8 5.0 16.0 10.0 176 28.8 0.096
17.8 19.7 5.0 16.0 10.0 176 26.0 0.096
18.9 23.1 5.0 17.0 10.0 164 30.5 0.097
18.9 20.9 5.0 17.0 10.0 161 27.6 0.097
20.0 24.4 5.0 18.0 10.0 155 32.2 0.098
20.0 22.1 5.0 18.0 10.0 172 29.2 0.098
22.2 27.1 5.0 20.0 10.0 139 35.8 0.099
22.2 24.5 5.0 20.0 10.0 154 32.4 0.099
24.4 29.8 5.0 22.0 10.0 127 39.4 0.100
24.4 26.9 5.0 22.0 10.0 141 35.5 0.100
26.7 32.6 5.0 24.0 10.0 116 43.0 0.101
26.7 29.5 5.0 24.0 10.0 128 38.9 0.101
28.9 35.3 5.0 26.0 10.0 107 46.6 0.101
28.9 31.9 5.0 26.0 10.0 119 42.1 0.101
31.1 38.0 5.0 28.0 10.0 99 50.1 0.102
31.1 34.4 5.0 28.0 10.0 110 45.4 0.102
33.3 40.7 5.0 30.0 10.0 93 53.5 0.103
33.3 36.8 5.0 30.0 10.0 103 48.4 0.103
=25oC unless otherwise noted
Test
Current
(mA)
I
T
Stand-off
Voltage
V
WM
(Volts)
Maximum
Reverse
Leakage at
V
WM
ID (µA)
(NOTE 3)
Maximum
Peak Pulse
Reverse
Current
Ippm(Amps)
(NOTE 2)
Maximum
Clamping
Voltage at
Ippm
(Volts)
V
C
Maximum
Temperature
Coefficient
of V
(BR)
(%/oC)
http://www.sse-diode.com
Page 3
(BR)
ELECTRICAL CHARACTERISTICS
( at TA=25oC unless otherwise noted )
Breakdown Voltage
(Volts)
V
Device
Type
(BR)
(NOTE 1)
Test
Current
(mA)
I
T
MIN MAX
5KP33
5KP33A
5KP36
5KP36A
5KP40
5KP40A
5KP43
5KP43A
5KP45
5KP45A
5KP48
5KP48A
5KP51
5KP51A
5KP54
5KP54A
5KP58
5KP58A
5KP60
5KP60A
5KP64
5KP64A
5KP70
5KP70A
5KP75
5KP75A
5KP78
5KP78A
5KP85
5KP85A
5KP90
5KP90A
5KP100
5KP100A
5KP110
5KP110A
NOTES:
1. V
2. Surge current waveform and derated
3. For bidirectional types having V
36.7 44.9 5.0 33.0 10.0 85 59.0 0.104
36.7 40.6 5.0 33.0 10.0 94 53.3 0.104
40.0 48.9 5.0 36.0 10.0 78 64.3 0.104
40.0 44.2 5.0 36.0 10.0 85 58.1 0.104
44.4 54.3 5.0 40.0 10.0 70 71.4 0.105
44.4 49.1 5.0 40.0 10.0 78 64.5 0.105
47.8 58.4 5.0 43.0 10.0 65 76.7 0.105
47.8 52.8 5.0 43.0 10.0 72 69.4 0.105
50.0 61.1 5.0 45.0 10.0 62 80.3 0.106
50.0 55.3 5.0 45.0 10.0 69 72.7 0.106
53.3 65.2 5.0 48.0 10.0 58 85.5 0.106
53.3 58.9 5.0 48.0 10.0 65 77.4 0.106
56.7 69.3 5.0 51.0 10.0 55 91.1 0.107
56.7 62.7 5.0 51.0 10.0 61 82.4 0.107
60.0 73.3 5.0 54.0 10.0 52 96.3 0.107
60.0 66.3 5.0 54.0 10.0 57 87.1 0.107
64.4 78.7 5.0 58.0 10.0 49 103 0.107
64.4 71.2 5.0 58.0 10.0 53 94 0.107
66.7 81.5 5.0 60.0 10.0 47 107 0.108
66.7 73.7 5.0 60.0 10.0 52 97 0.108
71.1 96.9 5.0 64.0 10.0 44 114 0.108
71.1 78.6 5.0 64.0 10.0 49 103 0.108
77.6 95.1 5.0 70.0 10.0 40 125 0.108
77.6 86.0 5.0 70.0 10.0 44 113 0.108
83.3 102 5.0 75.0 10.0 37 134 0.108
83.3 92.1 5.0 75.0 10.0 41 121 0.108
86.7 106 5.0 78.0 10.0 36 139 0.108
86.7 95.8 5.0 78.0 10.0 40 126 0.108
94.4 115 5.0 85.0 10.0 33 151 0.108
94.4 104 5.0 85.0 10.0 36 137 0.110
100 122 5.0 90.0 10.0 31 160 0.110
100 111 5.0 90.0 10.0 34 146 0.110
111 136 5.0 100 10.0 28 179 0.110
111 123 5.0 100 10.0 31 162 0.110
122 149 5.0 110 10.0 26 196 0.112
122 135 5.0 110 10.0 28 177 0.112
measured after IT applied for 300µs, IT=square wave pulse or equivalent
of 10 volts and less, the ID limit is doubled
WM
Stand-
off
Voltage
V
WM
(Volts)
Maximum
Reverse
Leakage at
V
WM
ID (µA)
(NOTE 3)
Maximum
Peak Pulse
Reverse
Current
Ippm
(Amps)
(NOTE 2)
http://www.sse-diode.com
Maximum
Clamping
Voltage at
Ippm
VC (Volts)
Maximum
Temperature
Coefficient
of V
(BR)
(%/oC)
Loading...