Datasheet 5B03, 5B04 Datasheet (Analog Devices)

5B Series Single / Double Channel

FEATURES

Mix and Match 5B Series I/O Module Capability
Factory Mutual (FM) Approved
Approved for Use in Class I, Division2, Groups A, B, C, and D

Locations.
CE Certified: EMC Directive in Heavy Industrial Applications
1500 V rms Channel/Channel and Input/Output Isolation
Four Backplanes and Three Mounting card Options
1-, 2- channels

o

-25

C to +85oC Temperature Range

Single Threaded Insert for module Hold Down

APPLICATIONS

Industrial Signal Conditioning
Industrial Signal Isolation
Industrial Signal Filtering

PRODUCT OVERVIEW

To address diverse applications, the 5B Series includes a family
of backplanes and mounting cards which provide a complete
signal conditioning solution. The models 5B03 and 5B04, one
and two channels cards, allow an economical means to handle a
few signals.

Mounting Card

5B03/5B04

FUNCTIONAL BLOCK DIAGRAM

Figure 1 5B03 & 5B04 Functional Block Diagram

The backplanes provide four screw terminals per channel for all
field connections. These connections satisfy all transducer
inputs, process current outputs and provide transducer
excitation when necessary. A cold junction temperature sensor
(model AC1361) sensor is also supplied on each channel to
accommodate thermocouple input modules. All 5B Series
backplanes and sockets require a regulated +5VDC external
power source.

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
Fax: [phone] © 2005 Analog Devices, Inc. All rights reserved.

www.analog.com

GENERAL DESCRIPTION

MODELS 5B03 and 5B04 – For smaller applications, the
models 5B03 and 5B04 mounting cards are available for one and
two 5B Series modules respectively. These module cards may be
clustered for groups of three or more signals. They are DIN rail

5B03/5B04

compatible using Phoenix Universal Module UM elements.

Figure 2 5B03

Figure 3 5B04

Rev. 0 | Page 2 of 6

5B03/04 Specifications

(typical @ +25°C and Vs =+5 V dc Power)

Description Model 5B03 Model 5B04

Number of Channels
ISOLATION

Input-to-Output Continuous
Channel-to-Channel Continuous

MECHANICAL DIMENSIONS

DIN Rail Mountable
WEIGHT
Provision for Mounting AC1352 Resistor
COLD JUNCTION TEMPERATURE SENSORS

Number provided on backplane
Type
Initial Accuracy @ +25
Accuracy +5oC to +45oC
Field I/O CONNECTOR
Number
Type

OUTPUT SWITCH ENABLE/READ INPUTS
POWER SUPPLY OPTIONS

Voltage; Operating
Voltage; Max Safe Limit – with modules
Current – without modules
Fuse

Environmental Temperature Range
Rated Performance
Operating
Storage
Relative Humidity

o

C

1 2

1500 V rms, Maximum
N/A

4.25” x 1.365”
(105 mm x 34.7 mm)
Yes Yes

0.85oz. (24.0) 1.06oz. (30.2g)
Yes Yes

1
Model AC1361
+0.25oC (+0.75oC, maximum)
+0.5oC (+0.0125oC/oC)

1
4-screw terminals
NO NO

+5 VDC +5%
+6.0 VDC Max.
N/A
N/A

-25°C to +85°C

-40°C to +85°C

-40°C to +85°C
0 to 95% @ +60°C noncondensing

5B03/5B04

1500 V rms, Maximum
1500 V rms, Maximum

4.25” x 1.365”
(105 mm x 34.7 mm)

2
Model AC1361
+0.25oC (+0.75oC, maximum)
+0.5oC (+0.0125oC/oC)

2
4-screw terminals

+5 VDC +5%
+6.0 VDC Max.
N/A
N/A

-25°C to +85°C

-40°C to +85°C

-40°C to +85°C
0 to 95% @ +60°C

noncondensing

Rev. 0 | Page 3 of 6

OUTLINE DIMENSIONS

5B03/5B04

Figure 4 Outline Dimensions 5B03

Figure 5 Outline Dimensions 5B04

Rev. 0 | Page 4 of 6

NOTES

5B03/5B04

Rev. 0 | Page 5 of 6

NOTES

5B03/5B04

© 2005 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective companies.

D05412-0-2/05(0)

Rev. 0 | Page 6 of 6