Page 1
SCALE
DATE
DRAWN
APPROVED
REV
PART NO.
NEXT ASSEMBLY
DATE
MAT'L
ECN
USED ON
DWG NO.
OFSHEET
CHECKED
TITLE
INSTRUMENTS, INC.
DO NOT MOUNT ON
THIS SURFACE
3032A
S/N XXX
+
10-32 CONNECTOR
18.00 IN ± .50 IN
.250 HEX
.28
Ø.236
MOUNTING SURFACE
4X
A
10/19/99 2646
10/23/98
N.C.
OUTLINE/INSTALLATION DRAWING,
R.A.
MODEL 3032A
MODEL 3032A
CHATSWORTH, CA.
MODEL 3032A
127-3032A
11
Page 2
Dynamic Transducers and Systems
21592 Marilla St. • Chatsworth, CA 91311 • Phone 818-700-7818
www.dytran.com • e-mail: [email protected]
SPECIFICATIONS
MODEL 3032A MINIATURE QUARTZ SHEAR LIVM ACCELEROMETER
SPECIFICATION VALUE UNITS
PHYSICAL
WEIGHT, LESS CABLE 1.5 GRAMS
WEIGHT, INCLUDING CABLE 5.6 GRAMS
SIZE (HEX x HEIGHT) .25 x .28 INCHES
MOUNTING PROVISION ADHESIVE MOUNT
CONNECTOR, COAXIAL, MOUNTED AT END OF 18 IN CABLE 10-32, UNF-2A JACK
CASE /CAP MATERIAL TITANIUM
ELEMENT TYPE QUARTZ SHEAR
PERFORMANCE
SENSITIVITY, +/-10% [1] 10 mV/G
RANGE F.S. FOR +/- 5 VOLTS OUT +/- 500 G's
FREQUENCY RESPONSE, +/- 10% 1 to 10,000 Hz
FREQUENCY RESPONSE, +/- 3db .66 TO 12,000 Hz
MOUNTED RESONANT FREQUENCY, NOM. 80 kHz
EQUIVALENT ELECTRICAL NOISE (RESOLUTION) .007 G, RMS
AMPLITUDE NON-LINEARITY (ZERO BASED BEST FIT ST.LINE METHOD) 2.0 % F.S., MAX.
TRANSVERSE SENSITIVITY, MAX. 5 PERCENT
STRAIN SENSITIVITY .001 G's PER MICROSTRAIN @ 250/
ENVIRONMENTAL
MAXIMUM VIBRATION 1000 G's, RMS
MAXIMUM SHOCK 1500 G's, PEAK
TEMPERATURE RANGE -60 TO +250 oF
THERMAL COEFFICIENT OF SENSITIVITY 0.06 %/oF
SEAL EPOXY/WELDED
ELECTRICAL
EXCITATION (COMPLIANCE) VOLTAGE RANGE +20 to +30 VDC
EXCITATION CURRENT RANGE 2 to 20 mA
OUTPUT IMPEDANCE, NOM. 100 OHMS
OUTPUT BIAS VOLTAGE 7.0 to 9.0 VDC
DISCHARGE TIME CONSTANT, MIN. 0.5 SEC.
OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD TOP POSITIVE GOING
[1] MEASURED AT 1 G RMS AT 100 HZ PER ISA RP 37.2
[2] A CALIBRATION CERTIFICATE TRACEABLE TO NIST IS SUPPLIED WITH EACH INSTRUMENT.
REV D ECN 7173 10/22/10
2
Loading...