Page 1
TOSHIBA Field Effect Transistor Silicon N Channel Junction Type
2SK372
2SK372
For Audio Amplifier, Analog-Switch, Constant Current
and Impedance Converter Applications
· High breakdown voltage: V
· High input impedance: I
· Low R
DS (ON)
: R
DS (ON)
· Small package
Maximum Ratings
Characteristics Symbol Rating Unit
Gate-drain voltage V
Gate current IG 10 mA
Drain power dissipation PD 200 mW
Junction temperature T
Storage temperature range T
(Ta ==== 25°C)
Electrical Characteristics
= −40 V
GDS
= −1.0 nA (max) (VGS = −30 V)
GSS
= 20 Ω (typ.) (I
= 15 mA)
DSS
-40 V
GDS
j
stg
(Ta ==== 25°C)
-55~125 °C
125 °C
Unit: mm
JEDEC ―
JEITA ―
TOSHIBA 2-4E1C
Weight: 0.13 g (typ.)
Characteristics Symbol Test Condition Min Typ. Max Unit
Gate cut-off current I
Gate-drain breakdown voltage V
Drain current
Gate-source cut-off voltage V
Forward transfer admittance ïYfsï VDS = 10 V, VGS = 0, f = 1 kHz (Note 2) 25 60 ¾ mS
Input capacitance C
Reverse transfer capacitance C
Drain-source ON resistance R
Note 1: I
classification GR: 5.0~10.0 mA, BL: 8.0~16.0 mA, Y: 14.0~30.0 mA
DSS
Note 2: Concition of the typical value I
GSS
(BR) GDSVDS
I
DSS
(Note 1)
GS (OFF)
iss
rss
DS (ON)
DSS
VGS = -30 V, VDS = 0 ¾ ¾ -1.0 nA
= 0, IG = -100 mA -40 ¾ ¾ V
VDS = 10 V, VGS = 0, f = 1 MHz ¾ 75 ¾ pF
VDG = 10 V, ID = 0, f = 1 MHz ¾ 15 ¾ pF
= 10 V, VGS = 0 5.0 ¾ 30 mA
V
DS
VDS = 10 V, ID = 0.1 mA -0.3 ¾ -1.2 V
VDS = 10 mV, VGS = 0 (Note 2) ¾ 20 ¾ W
= 15 mA
1
2003-03-26
Page 2
2SK372
2
2003-03-26
Page 3
2SK372
3
2003-03-26
Page 4
2SK372
4
2003-03-26
Page 5
2SK372
A
RESTRICTIONS ON PRODUCT USE
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
000707EA
5
2003-03-26
Loading...