Datasheet 2SK3353-Z, 2SK3353-S, 2SK3353 Datasheet (NEC)

DATA SHEET

MOS FIELD EFFECT TRANSISTOR

SWITCHING

N-CHANNEL POWER MOS FET

INDUSTRIAL USE

2SK3353

DESCRIPTION

The 2SK3353 is N-channel MOS Field Effect Transistor
designed for high current switching applications.

FEATURES

•Super low on-state resistance:

DS(on)1

= 9.5 mΩ MAX. (VGS = 10 V, ID = 41 A)

R

★

DS(on)2

★
★

•Low C

= 14 mΩ MAX. (VGS = 4 V, ID = 41 A)

R

iss

iss

: C

= 4650 pF TYP.

•Built-in gate protection diode

ABSOLUTE MAXIMUM RATINGS (TA = 25°C)

Drain to Source Voltage V
Gate to Source Voltage V
Drain Current (DC) I

★

Drain Current (pulse)

★

Total Power Dissipation (T
Total Power Dissipation (T
Channel Temperature T
Storage Temperature T

★

Single Avalanche Current

★

Single Avalanche Energy

Note1

C

= 25°C) P

A

= 25°C) P

Note2

Note2

DSS

GSS(AC)

D(DC)

D(pulse)

I

stg

AS

I

AS

E

T

T

ch

ORDERING INFORMATION

PART NUMBER PACKAGE

60 V

20 V

±

82 A

±

328 A

±

95 W

1.5 W

150 °C

–55 to +150 °C

45 A

202 mJ

2SK3353
2SK3353-S
2SK3353-Z

TO-220AB

TO-262

TO-220SMD

Notes 1.

★

PW ≤ 10

2.

Starting Tch = 25 °C, RG = 25 Ω, VGS = 20 V → 0 V

µ

s, Duty cycle ≤ 1 %

THERMAL RESISTANCE

★

Channel to Case Rth(ch-C) 1.32
Channel to Ambient Rth(ch-A) 83.3

The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.

Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.

Document No. D14130EJ1V0DS00 (1st edition)
Date Published June 1999 NS CP(K)
Printed in Japan

The mark ★ shows major revised points.

C/W

°

C/W

°

©

1999

★

ELECTRICAL CHARACTERISTICS (TA = 25 °C)

CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT

2SK3353

Drain to Source On-state Resi stance R

Gate to Source Cut-off Voltage V

DS(on)1VGS

DS(on)2VGS

R

GS(off)VDS

= 10 V, ID = 41 A7.59.5m
= 4 V, ID = 41 A 10.5 14 m

Ω
Ω

= 10 V, ID = 1 mA 1.5 2.0 2.5 V
Forward Transfer Admittance | yfs |VDS = 10 V, ID = 41 A3050S
Drain Leakage Current I
Gate to Source Leakage Current I
Input Capacitance C
Output Capacitance C
Reverse Transfer Capacitance C
Turn-on Delay Time t
Rise Time t
Turn-off Delay Time t
Fall Time t
Total Gate Charge Q
Gate to Source Charge Q
Gate to Drain Charge Q
Body Diode Forward Voltage V
Reverse Recovery Time t
Reverse Recovery Charge Q

DSS

VDS = 60 V, VGS = 0 V10

GSS

VGS = ±20 V, VDS = 0 V

iss

VDS = 10 V, VGS = 0 V, f = 1 MHz 4650 pF

oss

rss

d(on)ID

d(off)

GS

GD

F(S-D)IF

rr

= 41 A, V

r

RG = 10

f

G

ID = 82 A , VDD = 48 V, VGS = 10 V90nC

= 82 A, VGS = 0 V1.0V

IF = 82 A, VGS = 0 V, 60 ns

rr

di/dt = 100 A/µs 110 nC

GS(on)

= 10 V, VDD = 30 V, 100 ns

Ω

1550 ns

±

780 pF
380 pF

280 ns
420 ns

14 nC
38 nC

10

A

µ

A

µ

TEST CIRCUIT 1 AVALANCHE CAPABILITY

VGS = 20 → 0 V

PG.

V

R

G

DD

= 25 Ω

50 Ω

I

D

D.U.T.

I

AS

BV

DSS

V

DS

Starting T

L

DD

V

ch

TEST CIRCUIT 3 GATE CHARGE

D.U.T.

I

G

PG.

= 2 mA

50 Ω

R

L

V

DD

TEST CIRCUIT 2 SWITCHING TIME

D.U.T.

R

PG.

V

GS

0

τ

τ = 1 µs

Duty Cycle ≤ 1 %

G

R

G

= 10 Ω

V

V

GS

Wave Form

I

D

Wave Form

GS

10 %

0

I

D

0

%

90

10 %10

t

d(on)

trt

t

on

V

GS(on)

I

D

d(off)tf

90

%

%

90

%

t

off

R

L

V

DD

2

Data Sheet D14130EJ1V0DS00

PACKAGE DRAWING (Unit: mm)

2SK3353

1) TO-220AB (MP-25)

10.6 MAX.

1

10.0

2 3

3.0±0.3

4

1.3±0.2

0.75±0.1

2.54 TYP.

φ

3.6±0.2

5.9 MIN.6.0 MAX.

2.54 TYP.

15.5 MAX.12.7 MIN.

0.5±0.2

1.Gate

2.Drain

3.Source

4.Fin (Drain)

4.8 MAX.

1.3±0.2

2.8±0.2

2) TO-262 (MP-25 Fin Cut)

(10)

4

1

2 3

1.3±0.2

0.75±0.3

2.54 TYP. 2.54 TYP.

1.0±0.5

8.5±0.2

12.7 MIN.

4.8 MAX.

0.5±0.2

1.Gate

2.Drain

3.Source

4.Fin (Drain)

1.3±0.2

2.8±0.2

3) TO-220SMD (MP-25Z)

(10)

4

1.0±0.5

1.4±0.2

1.0±0.3

2.54 TYP. 2.54 TYP.

Remark

123

The diode connected between the gate and source of the transistor serves as a protector against ESD.
When this device actually used, an additional protection circuit is externally required if a voltage
exceeding the rated voltage may be applied to this device.

3.0±0.5

11±0.4

2.8±0.2

8.5±0.2

(0.5R)

4.8 MAX.

(0.8R)

1.Gate

2.Drain

3.Source

4.Fin (Drain)

1.3±0.2

0.5±0.2

EQUIVALENT CIRCUIT

Drain

Body

Gate

Gate
Protection
Diode

Source

Diode

Data Sheet D14130EJ1V0DS00

3

2SK3353

• The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.

• No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.

• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.

• Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.

• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.

• NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated "quality assurance program" for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.

M7 98. 8