Datasheet 293D Specification

Download

Page 1

(MIN.)

Glue Pad

www.vishay.com

Solid Tantalum Surface Mount Chip Capacitors

ANTAMOUNT

PERFORMANCE/ELECTRICAL CHARACTERISTICS

www.vishay.com/doc?40088

Operating Temperature: - 55 °C to + 125 °C (above 85 °C, voltage derating is required)

Capacitance Range: 0.10 μF to 1000 μF Capacitance Tolerance: ± 5 %, ± 10 % , ± 20 % 100 % Surge Current Tested (D and E Case Codes) Voltage Rating: 4 V

to 63 V

, Molded Case, Standard Industrial Grade

293D

Vishay Sprague

FEATURES

• Molded case available in six case codes

• Terminations: 100 % matte tin, standard, tin/lead available

• Compatible with “High Volume” automatic pick and place equipment

• Meets IEC specification QC300801/US0001 and EIA535BAAC mechanical and performance requirements

• Moisture sensitivity level 1

• Optical character recognition qualified

• Compliant terminations

• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912

Note

Thi s datasheet pro vi des information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.

APPLICATIONS

• Industrial

• Telecom infrastructure

• General purpose

Available

  

ORDERING INFORMATION

293D 107 X9 010 D 2WE3

TYPE CAPACITANCE CAPACITANCE

This is expressed in picofarads. The first

two digits are the

significant figures. The

third is the number of

zeros to follow.

Notes

• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.  Voltage substitutions will be marked with the higher voltage rating.

• We reserve the right to supply better series with more extensive screening.

• Dry pack is available per request, contact regional marketing.

TOLERANCE

X0 = ± 20 % X9 = ± 10 %

X5 = ± 5 %

(special order)

DC VOLTAGE RATING

AT + 85 °C

This is expressed in V.

To complete the three-digit

block, zeros precede the voltage rating. A decimal

point is indicated by an “R”

(6R3 = 6.3 V).

CASE CODE TERMINATION AND PACKAGING

See Ratings

and Case

Codes table

2TE3: Matte tin, 7" (178 mm) reel

2WE3: Matte tin, 13" (330 mm) reel

8T: Tin/lead, 7" (178 mm) reel

8W: Tin/lead, 13" (330 mm) reel

DIMENSIONS in inches [millimeters]

CASE CODE EIA SIZE L W H P T

A 3216-18

B 3528-21

C 6032-28

D 7343-31

E 7343-43

V 7343-20

Note

• Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option).

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

0.126 ± 0.008 [3.2 ± 0.20]

0.138 ± 0.008 [3.5 ± 0.20]

0.236 ± 0.012 [6.0 ± 0.30]

0.287 ± 0.012 [7.3 ± 0.30]

For technical questions, contact: [email protected]

0.063 ± 0.008 [1.6 ± 0.20]

0.110 ± 0.008 [2.8 ± 0.20]

0.126 ± 0.012 [3.2 ± 0.30]

0.169 ± 0.012 [4.3 ± 0.30]

0.063 ± 0.008 [1.6 ± 0.20]

0.075 ± 0.008 [1.9 ± 0.20]

0.098 ± 0.012 [2.5 ± 0.30]

0.110 ± 0.012 [2.8 ± 0.30]

0.157 ± 0.012 [4.0 ± 0.30]

0.079 max [2.0 max]

0.031 ± 0.012 [0.80 ± 0.30]

0.051 ± 0.012

[1.3 ± 0.30]

0.051 ± 0.012

[1.3 ± 0.30]

0.051 ± 0.012

[1.3 ± 0.30]

0.051 ± 0.012

[1.3 ± 0.30]

0.047 ± 0.004 [1.2 ± 0.10]

0.087 ± 0.004 [2.2 ± 0.10]

0.094 ± 0.004 [2.4 ± 0.10]

Document Number: 40002

TH (MIN.)

0.028 [0.70]

0.039 [1.0]

Page 2

Capacitance Code, pF

Indicates Lead (Pb)-free

Polarity Band (+)

Voltage Code

104L

A Case

Date Code

Vishay Sprague Logo

Indicates Lead (Pb)-free

Voltage

Capacitance, μF

Polarity Band (+)

22 10L

B, C, D, E, V Cases

www.vishay.com

RATINGS AND CASE CODES

μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 63 V

0.10 AAA

0.15 AA/B

0.22 AA/B

0.33 AAA/B

0.47 A A A A/B A/B/C

0.68 A A A A/B B/C

1.0 A A A/B A/B A/B B/C

1.5 A A A/B A/B A/B B/C B/C/D

2.2 A A A/B A/B A/B A/B/C B/C B/C/D

3.3 A A/B A/B A/B A/B/C A/B/C B/C/D C/D

4.7 A/B A/B A/B/C A/B/C A/B/C A/B/C/D B/C/D C/D/E D

6.8 A/B A/B A/B/C A/B/C A/B/C B/C/D C/D D/E

10 A/B A/B/C A/B/C A/B/C/D B/C/D B/C/D C/D D/E E

15 A/B/C A/B/C A/B/C B/C B/C/D B/C/D D/E E

22 A/B/C A/B/C A/B/C/D B/C/D B/C/D C/D/E/V D/E

33 A/B/C A/B/C B/C/D B/C/D C/D D/E

47 A/B/C A/B/C/D B/C/D C/D/E D/E D/E

68 B/C/D B/C/D B/C/D/E/V D/E D/E E

100 A/B/C/D B/C/D/E B/C/D/E/V D/E/V D/E

120 D D E

150 B/C/D C/D/E C/D/E D/E

220 B/C/D/E C/D/E D/E/V E

330 D/E D/E D/E

470 D/E D/E E

680 D/E E

1000 E E

Vishay Sprague

293D

MARKING

Marking

Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” Case capacitors use a letter code for the voltage and EIA capacitance code.

The Vishay Sprague A manufacturing date code is marked on all capacitors. Capacitors may bear a different marking scheme if a part with more extensive screening is substituted. These would include, for example, “R” for low ESR series (TR3) or “P” for professional series (TP3). Call the factory for further explanation.

Revision: 04-Jul-13

“A” CASE VOLTAGE CODE

VOLTS CODE

4.0 G

6.3 J

10 A

16 C

20 D

25 E

35 V

50 T

trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V.

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

For technical questions, contact: [email protected]

Document Number: 40002

Page 3

www.vishay.com

STANDARD RATINGS

CAPACITANCE

(μF)

2.2 A 293D225(1)004A(2) 0.5 6 7.60 0.10

3.3 A 293D335(1)004A(2) 0.5 6 7.60 0.10

4.7 A 293D475(1)004A(2) 0.5 6 6.30 0.11

4.7 B 293D475(1)004B(2) 0.5 6 7.00 0.11

6.8 A 293D685(1)004A(2) 0.5 6 5.50 0.12

6.8 B 293D685(1)004B(2) 0.5 6 3.40 0.16

10 A 293D106(1)004A(2) 0.5 6 5.10 0.12

10 B 293D106(1)004B(2) 0.5 6 3.50 0.16

15 A 293D156(1)004A(2) 0.6 6 3.40 0.15

15 B 293D156(1)004B(2) 0.6 6 2.90 0.17

15 C 293D156(1)004C(2) 0.6 6 2.80 0.20

22 A 293D226(1)004A(2) 0.9 6 2.90 0.16

22 B 293D226(1)004B(2) 0.9 6 2.50 0.18

22 C 293D226(1)004C(2) 0.9 6 1.80 0.25

33 A 293D336(1)004A(2) 1.3 6 2.90 0.16

33 B 293D336(1)004B(2) 1.3 6 2.00 0.21

33 C 293D336(1)004C(2) 1.3 6 1.80 0.25

47 A 293D476(1)004A(2) 1.9 14 2.50 0.17

47 B 293D476(1)004B(2) 1.9 6 1.90 0.21

47 C 293D476(1)004C(2) 1.9 6 1.80 0.25

68 B 293D686(1)004B(2) 2.7 6 1.90 0.21

68 C 293D686(1)004C(2) 2.7 6 1.40 0.28

68 D 293D686(1)004D(2) 2.7 6 0.80 0.43

100 A 293D107X0004A(2) 10.0 30 2.50 0.22

100 B 293D107(1)004B(2) 4.0 8 1.80 0.22

100 C 293D107(1)004C(2) 4.0 6 0.80 0.37

100 D 293D107(1)004D(2) 4.0 6 0.70 0.46

120 D 293D127(1)004D(2) 4.8 6 0.60 0.51

150 B 293D157(1)004B(2) 6.0 14 1.60 0.23

150 C 293D157(1)004C(2) 6.0 12 0.70 0.40

150 D 293D157(1)004D(2) 6.0 8 0.60 0.50

220 B 293D227X0004B(2) 8.8 18 1.50 0.24

220 C 293D227(1)004C(2) 8.8 8 0.70 0.40

220 D 293D227(1)004D(2) 8.8 8 0.60 0.50

220 E 293D227(1)004E(2) 8.8 8 0.50 0.57

330 D 293D337(1)004D(2) 13.2 8 0.60 0.50

330 E 293D337(1)004E(2) 13.2 8 0.50 0.57

470 D 293D477(1)004D(2) 18.8 10 0.60 0.50

470 E 293D477(1)004E(2) 18.8 10 0.50 0.57

680 D 293D687X0004D(2) 27.2 25 0.20 0.87

680 E 293D687(1)004E(2) 27.2 12 0.50 0.57

1000 E 293D108X0004E(2) 40.0 20 0.50 0.57

Note

• Part number definitions: (1) Tolerance: X0, X9 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W (3) Lead (Pb)-free terminations and packaging codes: 2TE3, 2WE3

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

AT + 85 °C; 2.7 VDC AT + 125 °C

4 V

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DC

LEAKAGE

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz

(%)

Vishay Sprague

MAX. ESR AT + 25 °C

100 kHz

()

Document Number: 40002

293D

MAX. RIPPLE

100 kHz

RMS

(A)

Page 4

www.vishay.com

STANDARD RATINGS

CAPACITANCE

(μF)

1.5 A 293D155(1)6R3A(2) 0.5 6 2.90 0.16

2.2 A 293D225(1)6R3A(2) 0.5 6 7.60 0.10

3.3 A 293D335(1)6R3A(2) 0.5 6 6.30 0.11

3.3 B 293D335(1)6R3B(2) 0.5 6 5.50 0.12

4.7 A 293D475(1)6R3A(2) 0.5 6 5.50 0.12

4.7 B 293D475(1)6R3B(2) 0.5 6 4.40 0.14

6.8 A 293D685(1)6R3A(2) 0.5 6 5.00 0.12

6.8 B 293D685(1)6R3B(2) 0.5 6 3.40 0.16

10 A 293D106(1)6R3A(2) 0.6 6 3.40 0.15

10 B 293D106(1)6R3B(2) 0.6 6 2.90 0.17

10 C 293D106(1)6R3C(2) 0.6 6 3.00 0.19

15 A 293D156(1)6R3A(2) 0.9 6 2.90 0.16

15 B 293D156(1)6R3B(2) 0.9 6 2.50 0.18

15 C 293D156(1)6R3C(2) 0.9 6 1.80 0.25

22 A 293D226(1)6R3A(2) 1.3 6 2.90 0.16

22 B 293D226(1)6R3B(2) 1.3 6 2.00 0.21

22 C 293D226(1)6R3C(2) 1.3 6 1.80 0.25

33 A 293D336(1)6R3A(2) 2.0 14 2.50 0.17

33 B 293D336(1)6R3B(2) 2.0 6 1.90 0.21

33 C 293D336(1)6R3C(2) 2.0 6 1.50 0.27

47 A 293D476(1)6R3A(2) 2.8 12 1.60 0.22

47 B 293D476(1)6R3B(2) 2.8 6 1.90 0.21

47 C 293D476(1)6R3C(2) 2.8 6 1.40 0.28

47 D 293D476(1)6R3D(2) 2.8 6 0.80 0.43

68 B 293D686(1)6R3B(2) 4.1 6 1.80 0.22

68 C 293D686(1)6R3C(2) 4.1 6 0.80 0.37

68 D 293D686(1)6R3D(2) 4.1 6 0.70 0.46

100 B 293D107(1)6R3B(2) 6.0 15 1.70 0.22

100 C 293D107(1)6R3C(2) 6.0 6 0.80 0.37

100 D 293D107(1)6R3D(2) 6.0 6 0.70 0.46

100 E 293D107(1)6R3E(2) 6.0 8 0.70 0.49

120 D 293D127(1)6R3D(2) 6.3 8 0.70 0.46

150 C 293D157(1)6R3C(2) 9.0 8 0.70 0.40

150 D 293D157(1)6R3D(2) 9.0 8 0.60 0.50

150 E 293D157(1)6R3E(2) 9.0 8 0.50 0.57

220 C 293D227(1)6R3C(2) 13.9 14 0.70 0.39

220 D 293D227(1)6R3D(2) 13.2 8 0.60 0.50

220 E 293D227(1)6R3E(2) 13.2 8 0.50 0.57

330 D 293D337(1)6R3D(2) 19.8 8 0.60 0.50

330 E 293D337(1)6R3E(2) 19.8 8 0.50 0.57

470 D 293D477(1)6R3D(2) 28.2 14 0.50 0.55

470 E 293E477(1)6R3E(2) 28.2 10 1.50 0.57

680 E 293D687(1)6R3E(2) 42.8 20 0.50 0.57

1000 E 293D108X06R3E(2) 63.0 30 0.40 0.64

Note

• Part number definitions: (1) Tolerance: X0, X9 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W (3) Lead (Pb)-free terminations and packaging codes: 2TE3, 2WE3

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

6.3 VDC AT + 85 °C; 4 VDC AT 125 °C

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DC

LEAKAGE

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz

(%)

Vishay Sprague

MAX. ESR AT + 25 °C

100 kHz

()

Document Number: 40002

293D

MAX. RIPPLE

100 kHz

RMS

(A)

Page 5

www.vishay.com

STANDARD RATINGS

CAPACITANCE

(μF)

0.47 A 293D474(1)010A(2) 0.5 4 14.00 0.07

1.0 A 293D105(1)010A(2) 0.5 4 9.60 0.09

1.5 A 293D155(1)010A(2) 0.5 6 8.00 0.10

2.2 A 293D225(1)010A(2) 0.5 6 6.30 0.11

2.2 B 293D225(1)010B(2) 0.5 6 4.60 0.14

3.3 A 293D335(1)010A(2) 0.5 6 5.50 0.12

3.3 B 293D335(1)010B(2) 0.5 6 5.50 0.12

4.7 A 293D475(1)010A(2) 0.5 6 5.00 0.12

4.7 B 293D475(1)010B(2) 0.5 6 3.40 0.16

4.7 C 293D475(1)010C(2) 0.5 6 2.30 0.22

6.8 A 293D685(1)010A(2) 0.7 6 4.20 0.13

6.8 B 293D685(1)010B(2) 0.7 6 2.90 0.17

6.8 C 293D685(1)010C(2) 0.7 6 1.90 0.24

10 A 293D106(1)010A(2) 1.0 6 3.40 0.15

10 B 293D106(1)010B(2) 1.0 6 2.50 0.18

10 C 293D106(1)010C(2) 1.0 6 1.80 0.25

15 A 293D156(1)010A(2) 1.5 6 2.90 0.16

15 B 293D156(1)010B(2) 1.5 6 2.00 0.21

15 C 293D156(1)010C(2) 1.5 6 1.80 0.25

22 A 293D226(1)010A(2) 2.2 8 2.50 0.17

22 B 293D226(1)010B(2) 2.2 6 1.90 0.21

22 C 293D226(1)010C(2) 2.2 6 1.50 0.27

22 D 293D226(1)010D(2) 2.2 6 1.50 0.32

33 B 293D336(1)010B(2) 3.3 6 1.90 0.21

33 C 293D336(1)010C(2) 3.3 6 1.40 0.28

33 D 293D336(1)010D(2) 3.3 6 0.80 0.43

47 B 293D476(1)010B(2) 4.7 6 1.80 0.22

47 C 293D476(1)010C(2) 4.7 6 1.10 0.32

47 D 293D476(1)010D(2) 4.7 6 0.70 0.46

68 B 293D686(1)010B(2) 6.8 14 1.80 0.22

68 C 293D686(1)010C(2) 6.8 6 1.00 0.33

68 D 293D686(1)010D(2) 6.8 6 0.70 0.46

68 E 293D686(1)010E(2) 6.8 6 0.80 0.45

68 V 293D686(1)010V(3) 6.8 6 0.70 0.42

100 B 293D107X0010B(2) 10.0 25 2.50 0.18

100 C 293D107(1)010C(2) 10.0 8 0.90 0.35

100 D 293D107(1)010D(2) 10.0 8 0.60 0.50

100 E 293D107(1)010E(2) 10.0 8 0.70 0.49

100 V 293D107(1)010V(3) 10.0 8 0.70 0.42

120 E 293D127(1)010E(2) 12.0 6 1.00 0.41

150 C 293D157X0010C(2) 15.0 20 0.90 0.35

150 D 293D157(1)010D(2) 15.0 8 0.60 0.50

150 E 293D157(1)010E(2) 15.0 8 0.50 0.57

220 D 293D227(1)010D(2) 22.0 8 0.60 0.50

Note

• Part number definitions: (1) Tolerance: X0, X9 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W (3) Lead (Pb)-free terminations and packaging codes: 2TE3, 2WE3

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

10 VDC AT + 85 °C; 7 VDC AT 125 °C

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DC

LEAKAGE

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz

(%)

Vishay Sprague

MAX. ESR AT + 25 °C

100 kHz

()

Document Number: 40002

293D

MAX. RIPPLE

100 kHz

RMS

(A)

Page 6

www.vishay.com

STANDARD RATINGS

CAPACITANCE

(μF)

220 E 293D227(1)010E(2) 22.0 8 0.50 0.57

220 V 293D227(1)010V(3) 30.0 12 0.50 0.50

330 D 293D337(1)010D(2) 33.0 15 0.50 0.57

330 E 293D337(1)010E(2) 33.0 10 0.50 0.57

470 E 293D477(1)010E(2) 47.0 15 0.50 0.57

0.68 A 293D684(1)016A(2) 0.5 4 10.40 0.08

1.0 A 293D105(1)016A(2) 0.5 4 9.30 0.09

1.5 A 293D155(1)016A(2) 0.5 6 6.70 0.11

1.5 B 293D155(1)016B(2) 0.5 6 6.40 0.12

2.2 A 293D225(1)016A(2) 0.5 6 5.90 0.11

2.2 B 293D225(1)016B(2) 0.5 6 4.60 0.14

3.3 A 293D335(1)016A(2) 0.5 6 5.00 0.12

3.3 B 293D335(1)016B(2) 0.5 6 3.50 0.16

4.7 A 293D475(1)016A(2) 0.8 6 5.00 0.12

4.7 B 293D475(1)016B(2) 0.8 6 2.90 0.17

4.7 C 293D475(1)016C(2) 0.8 6 2.90 0.19

6.8 A 293D685(1)016A(2) 1.1 6 4.20 0.13

6.8 B 293D685(1)016B(2) 1.1 6 2.50 0.18

6.8 C 293D685(1)016C(2) 1.1 6 1.90 0.24

10 A 293D106(1)016A(2) 1.6 6 3.00 0.16

10 B 293D106(1)016B(2) 1.6 6 2.00 0.21

10 C 293D106(1)016C(2) 1.6 6 1.80 0.25

10 D 293D106(1)016D(2) 2.5 6 1.20 0.35

15 B 293D156(1)016B(2) 2.4 6 2.00 0.21

15 C 293D156(1)016C(2) 2.4 6 1.50 0.27

22 B 293D226(1)016B(2) 3.5 6 1.90 0.21

22 C 293D226(1)016C(2) 3.5 6 1.40 0.28

22 D 293D226(1)016D(2) 3.5 6 0.80 0.43

33 B 293D336(1)016B(2) 5.3 6 1.80 0.22

33 C 293D336(1)016C(2) 5.3 6 1.10 0.32

33 D 293D336(1)016D(2) 5.3 6 0.70 0.46

47 C 293D476(1)016C(2) 7.5 6 1.00 0.33

47 D 293D476(1)016D(2) 7.5 6 0.70 0.46

47 E 293D476(1)016E(2) 7.5 6 0.80 0.45

68 D 293D686(1)016D(2) 10.9 6 0.60 0.50

68 E 293D686(1)016E(2) 10.9 6 0.80 0.45

100 D 293D107(1)016D(2) 16.0 8 0.60 0.50

100 E 293D107(1)016E(2) 16.0 8 0.60 0.52

100 V 293D107(1)16V(3) 16.0 10 0.40 0.56

150 D 293D157(1)016D(2) 24.0 8 0.60 0.50

150 E 293D157(1)016E(2) 24.0 8 0.50 0.57

220 E 293D227(1)016E(2) 35.2 14 0.50 0.57

Note

• Part number definitions: (1) Tolerance: X0, X9 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W (3) Lead (Pb)-free terminations and packaging codes: 2TE3, 2WE3

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

10 VDC AT + 85 °C; 7 VDC AT 125 °C

AT + 85 °C; 10 VDC AT + 125 °C

16 V

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DC

LEAKAGE

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz

(%)

Vishay Sprague

MAX. ESR AT + 25 °C

100 kHz

()

Document Number: 40002

293D

MAX. RIPPLE

100 kHz

RMS

(A)

Page 7

www.vishay.com

STANDARD RATINGS

CAPACITANCE

(μF)

0.47 A 293D474(1)020A(2) 0.5 4 14.00 0.07

0.68 A 293D684(1)020A(2) 0.5 4 10.00 0.09

1.0 A 293D105(1)020A(2) 0.5 4 8.40 0.09

1.0 B 293D105(1)020B(2) 0.5 4 9.00 0.10

1.5 A 293D155(1)020A(2) 0.5 6 6.30 0.11

1.5 B 293D155(1)020B(2) 0.5 4.8 5.60 0.12

2.2 A 293D225(1)020A(2) 0.5 6 5.90 0.11

2.2 B 293D225(1)020B(2) 0.5 6 3.50 0.16

3.3 A 293D335(1)020A(2) 0.7 6 5.90 0.11

3.3 B 293D335(1)020B(2) 0.7 6 3.00 0.17

3.3 C 293D335(1)020C(2) 0.8 6 2.30 0.22

4.7 A 293D475(1)020A(2) 0.9 6 5.00 0.12

4.7 B 293D475(1)020B(2) 0.9 6 2.90 0.17

4.7 C 293D475(1)020C(2) 0.9 6 2.30 0.22

6.8 A 293D685(1)020A(2) 1.4 6 4.50 0.13

6.8 B 293D685(1)020B(2) 1.4 6 2.50 0.18

6.8 C 293D685(1)020C(2) 1.4 6 1.90 0.24

10 B 293D106(1)020B(2) 2.0 6 2.10 0.20

10 C 293D106(1)020C(2) 2.0 6 1.70 0.25

10 D 293D106(1)020D(2) 2.0 6 1.00 0.38

15 B 293D156(1)020B(2) 3.0 6 2.30 0.19

15 C 293D156(1)020C(2) 3.0 6 1.50 0.27

15 D 293D156(1)020D(2) 3.0 6 0.90 0.41

22 B 293D226(1)020B(2) 4.4 6 2.10 0.20

22 C 293D226(1)020C(2) 4.4 6 1.10 0.32

22 D 293D226(1)020D(2) 4.4 6 0.70 0.46

33 C 293D336(1)020C(2) 6.6 6 1.00 0.33

33 D 293D336(1)020D(2) 6.6 6 0.70 0.46

47 D 293D476(1)020D(2) 9.4 6 0.70 0.46

47 E 293D476(1)020E(2) 9.4 6 0.60 0.52

68 D 293D686(1)020D(2) 13.6 6 0.70 0.46

68 E 293D686(1)020E(2) 13.6 6 0.60 0.52

100 D 293D107(1)020D(2) 20.0 8 0.60 0.50

100 E 293D107(1)020E(2) 20.0 8 0.50 0.57

0.10 A 293D104(1)025A(2) 0.5 4 20.00 0.06

0.33 A 293D334(1)025A(2) 0.5 4 13.00 0.08

0.47 A 293D474(1)025A(2) 0.5 4 12.00 0.08

0.68 A 293D684(1)025A(2) 0.5 4 8.40 0.09

1.0 A 293D105(1)025A(2) 0.5 4 7.60 0.10

1.0 B 293D105(1)025B(2) 0.5 4 5.00 0.13

1.5 A 293D155(1)025A(2) 0.5 6 6.70 0.11

1.5 B 293D155(1)025B(2) 0.5 6 4.60 0.14

2.2 A 293D225(1)025A(2) 0.6 6 6.30 0.11

Note

• Part number definitions: (1) Tolerance: X0, X9 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W (3) Lead (Pb)-free terminations and packaging codes: 2TE3, 2WE3

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

20 VDC AT + 85 °C; 13 VDC AT + 125 °C

25 V

AT + 85 °C; 17 VDC AT + 125 °C

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DC

LEAKAGE

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz

(%)

Vishay Sprague

MAX. ESR AT + 25 °C

100 kHz

()

Document Number: 40002

293D

MAX. RIPPLE

100 kHz

RMS

(A)

Page 8

www.vishay.com

STANDARD RATINGS

CAPACITANCE

(μF)

2.2 B 293D225(1)025B(2) 0.6 6 3.80 0.15

2.2 C 293D225(1)025C(2) 0.6 6 3.20 0.19

3.3 A 293D335(1)025A(2) 0.8 6 6.00 0.14

3.3 B 293D335(1)025B(2) 0.8 6 3.10 0.17

3.3 C 293D335(1)025C(2) 0.8 6 2.30 0.22

4.7 A 293D475(1)025A(2) 1.2 6 5.50 0.12

4.7 B 293D475(1)025B(2) 1.2 6 2.80 0.17

4.7 C 293D475(1)025C(2) 1.2 6 2.00 0.24

4.7 D 293D475(1)025D(2) 1.2 6 1.30 0.34

6.8 B 293D685(1)025B(2) 1.7 6 2.40 0.19

6.8 C 293D685(1)025C(2) 1.7 6 1.70 0.25

6.8 D 293D685(1)025D(2) 1.7 6 1.10 0.37 10 B 293D106(1)025B(2) 2.5 6 2.30 0.19 10 C 293D106(1)025C(2) 2.5 6 1.50 0.27 10 D 293D106(1)025D(2) 2.5 6 1.00 0.39 15 B 293D156(1)025B(2) 3.8 6 2.20 0.20 15 C 293D156(1)025C(2) 3.8 6 1.20 0.30 15 D 293D156(1)025D(2) 3.8 6 0.80 0.43 22 C 293D226(1)025C(2) 5.5 6 1.20 0.30 22 D 293D226(1)025D(2) 5.5 6 0.70 0.46 22 E 293D226(1)025E(2) 5.5 6 0.80 0.45 22 V 293D226(1)025V(3) 5.5 6 0.70 0.42 33 D 293D336(1)025D(2) 8.3 6 0.70 0.46 33 E 293D336(1)025E(2) 8.3 6 0.60 0.52 47 D 293D476(1)025D(2) 11.8 8 0.70 0.46 47 E 293D476(1)025E(2) 11.8 6 0.60 0.52 68 E 293D686(1)025E(2) 17.0 8 0.60 0.52

0.10 A 293D104(1)035A(2) 0.5 4 20.00 0.06

0.15 A 293D154(1)035A(2) 0.5 4 18.00 0.07

0.22 A 293D224(1)035A(2) 0.5 4 15.00 0.07

0.33 A 293D334(1)035A(2) 0.5 4 13.00 0.08

0.47 A 293D474(1)035A(2) 0.5 4 10.00 0.09

0.47 B 293D474(1)035B(2) 0.5 4 8.00 0.10

0.68 A 293D684(1)035A(2) 0.5 4 7.60 0.10

0.68 B 293D684(1)035B(2) 0.5 4 6.50 0.11

1.0 A 293D105(1)035A(2) 0.5 4 7.50 0.10

1.0 B 293D105(1)035B(2) 0.5 4 5.00 0.13

1.5 B 293D155(1)035B(2) 0.5 6 4.20 0.14

1.5 C 293D155(1)035C(2) 0.5 6 3.80 0.17

2.2 B 293D225(1)035B(2) 0.8 6 3.80 0.15

2.2 C 293D225(1)035C(2) 0.8 6 2.90 0.20

3.3 B 293D335(1)035B(2) 1.2 6 3.50 0.16

3.3 C 293D335(1)035C(2) 1.2 6 2.10 0.23

3.3 D 293D335(1)035D(2) 1.2 6 1.70 0.30

Note

• Part number definitions: (1) Tolerance: X0, X9 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W (3) Lead (Pb)-free terminations and packaging codes: 2TE3, 2WE3

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

25 VDC AT + 85 °C; 17 VDC AT + 125 °C

AT + 85 °C; 23 VDC AT + 125 °C

35 V

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DC

LEAKAGE

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz

(%)

Vishay Sprague

MAX. ESR AT + 25 °C

100 kHz

()

Document Number: 40002

293D

MAX. RIPPLE

100 kHz

RMS

(A)

Page 9

www.vishay.com

STANDARD RATINGS

CAPACITANCE

(μF)

4.7 B 293D475(1)035B(2) 1.7 6 3.10 0.17

4.7 C 293D475(1)035C(2) 1.6 6 1.90 0.24

4.7 D 293D475(1)035D(2) 1.6 6 1.30 0.34

6.8 C 293D685(1)035C(2) 2.4 6 1.80 0.25

6.8 D 293D685(1)035D(2) 2.4 6 1.10 0.37 10 C 293D106(1)035C(2) 3.5 6 1.60 0.26 10 D 293D106(1)035D(2) 3.5 6 0.80 0.43 15 D 293D156(1)035D(2) 5.3 6 0.70 0.46 15 E 293D156(1)035E(2) 5.3 6 0.70 0.49 22 D 293D226(1)035D(2) 7.7 6 0.60 0.50 22 E 293D226(1)035E(2) 7.7 6 0.60 0.57

0.10 A 293D104(1)050A(2) 0.5 4 19.00 0.06

0.15 A 293D154(1)050A(2) 0.5 4 17.00 0.07

0.15 B 293D154(1)050B(2) 0.5 4 14.00 0.08

0.22 A 293D224(1)050A(2) 0.5 4 15.00 0.07

0.22 B 293D224(1)050B(2) 0.5 4 12.00 0.08

0.33 A 293D334(1)050A(2) 0.5 4 14.00 0.07

0.33 B 293D334(1)050B(2) 0.5 4 10.00 0.09

0.47 A 293D474(1)050A(2) 0.5 4 12.00 0.08

0.47 B 293D474(1)050B(2) 0.5 4 8.40 0.10

0.47 C 293D474(1)050C(2) 0.5 4 6.70 0.13

0.68 B 293D684(1)050B(2) 0.5 4 7.60 0.11

0.68 C 293D684(1)050C(2) 0.5 4 5.90 0.14

1.0 B 293D105(1)050B(2) 0.5 4 6.70 0.11

1.0 C 293D105(1)050C(2) 0.5 4 4.60 0.16

1.5 B 293D155(1)050B(2) 0.8 6 6.00 0.12

1.5 C 293D155(1)050C(2) 0.8 6 3.40 0.18

1.5 D 293D155(1)050D(2) 0.8 6 2.90 0.23

2.2 B 293D225(1)050B(2) 1.1 6 3.50 0.16

2.2 C 293D225(1)050C(2) 1.1 6 2.90 0.20

2.2 D 293D225(1)050D(2) 1.1 6 2.10 0.27

3.3 C 293D335(1)050C(2) 1.7 6 2.50 0.21

3.3 D 293D335(1)050D(2) 1.7 6 1.70 0.30

4.7 C 293D475(1)050C(2) 2.4 6 1.50 0.27

4.7 D 293D475(1)050D(2) 2.4 6 1.20 0.37

4.7 E 293D475(1)050E(2) 2.4 6 1.10 0.34

6.8 D 293D685(1)050D(2) 3.4 6 0.90 0.41

6.8 E 293D685(1)050E(2) 3.4 6 0.90 0.43 10 D 293D106(1)050D(2) 5.0 6 0.80 0.43 10 E 293D106(1)050E(2) 5.0 6 0.80 0.45 15 E 293D156(1)050E(2) 7.5 6 0.80 0.45

4.7 D 293D475(1)063D(2) 3.0 6 1.10 0.37 10 E 293D106(1)063E(2) 6.3 6 1.00 0.41

Note

• Part number definitions: (1) Tolerance: X0, X9 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W (3) Lead (Pb)-free terminations and packaging codes: 2TE3, 2WE3

CASE CODE PART NUMBER

35 VDC AT + 85 °C; 23 VDC AT + 125 °C

50 V

AT + 85 °C; 33 VDC AT + 125 °C

63 V

AT + 85 °C; 40 VDC AT + 125 °C

MAX. DC

LEAKAGE

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz

(%)

Vishay Sprague

MAX. ESR AT + 25 °C

100 kHz

()

293D

MAX. RIPPLE

100 kHz

RMS

(A)

Revision: 04-Jul-13

For technical questions, contact: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Document Number: 40002

Page 10

0.1

100

100M

10K

100K

10M

IMPEDANCE

ESR

4.7 μF, 10 VDC-B CASE

4.7 μF, 10 V

-D CASE



FREQUENCY Hz

0.1

100

100M

10K

100K

10M

FREQUENCY Hz

IMPEDANCE

ESR

10 μ F, 16 VDC-C CASE



0.1

100

100M

10K

100K

10M

FREQUENCY Hz

IMPEDANCE

ESR

1 μF, 35 VDC-B CASE

6.8 μF, 35 VDC-D CASE



www.vishay.com

RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)

STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS

Capacitor Voltage Rating Operating Voltage

4.0 2.5

6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 63 36

SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS

Capacitor Voltage Rating Operating Voltage

4.0 2.5

6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 63 31

Vishay Sprague

293D

TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY

100

IMPEDANCE

ESR



0.1 1K

Revision: 04-Jul-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

10K

6.8 μF, 20 VDC-C CASE

22 μF, 20 VDC-D CASE

100K

10M

100M

FREQUENCY Hz

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Document Number: 40002

Page 11

www.vishay.com

POWER DISSIPATION

CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR

A 0.075

B 0.085

C 0.110

D 0.150

E 0.165

V 0.125

STANDARD PACKAGING QUANTITY

CASE CODE

A 2000 9000

B 2000 8000

C 500 3000

D 500 2500

E 400 1500

V 1000 5000

293D

Vishay Sprague

UNITS PER REEL

7" REEL 13" REEL

PRODUCT INFORMATION

Guide for Molded Tantalum Capacitors

Pad Dimensions

Packaging Dimensions

Moisture Sensitivity www.vishay.com/doc?40135

SELECTOR GUIDES

Solid Tantalum Selector Guide www.vishay.com/doc?49053

Solid Tantalum Chip Capacitors www.vishay.com/doc?40091

FAQ

Frequently Asked Questions www.vishay.com/doc?40110

www.vishay.com/doc?40074

Revision: 04-Jul-13

For technical questions, contact: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Document Number: 40002

Page 12

www.vishay.com

-------

Guide for Molded Tantalum Capacitors

Molded Guide

Vishay Sprague

INTRODUCTION

Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum/tantalum oxide/manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly technology.

Vishay Sprague has been a pioneer and leader in this field, producing a large variety of tantalum capacitor types for consumer, industrial, automotive, military, and aerospace electronic applications.

Tantalum is not found in its pure state. Rather, it is commonly found in a number of oxide minerals, often in combination with Columbium ore. This combination is known as “tantalite” when its contents are more than one-half tantalum. Important sources of tantalite include Australia, Brazil, Canada, China, and several African countries. Synthetic tantalite concentrates produced from tin slags in Thailand, Malaysia, and Brazil are also a significant raw material for tantalum production.

Electronic applications, and particularly capacitors, consume the largest share of world tantalum production. Other important applications for tantalum include cutting tools (tantalum carbide), high temperature super alloys, chemical processing equipment, medical implants, and military ordnance.

Vishay Sprague is a major user of tantalum materials in the form of powder and wire for capacitor elements and rod and sheet for high temperature vacuum processing.

THE BASICS OF TANTALUM CAPACITORS

Most metals form crystalline oxides which are non-protecting, such as rust on iron or black oxide on copper. A few metals form dense, stable, tightly adhering, electrically insulating oxides. These are the so-called “valve“metals and include titanium, zirconium, niobium, tantalum, hafnium, and aluminum. Only a few of these permit the accurate control of oxide thickness by electrochemical means. Of these, the most valuable for the electronics industry are aluminum and tantalum.

Capacitors are basic to all kinds of electrical equipment, from radios and television sets to missile controls and automobile ignitions. Their function is to store an electrical charge for later use.

Capacitors consist of two conducting surfaces, usually metal plates, whose function is to conduct electricity. They are separated by an insulating material or dielectric. The dielectric used in all tantalum electrolytic capacitors is tantalum pentoxide.

Tantalum pentoxide compound possesses high-dielectric strength and a high-dielectric constant. As capacitors are being manufactured, a film of tantalum pentoxide is applied to their electrodes by means of an electrolytic process. The film is applied in various thicknesses and at various voltages and although transparent to begin with, it takes on different colors as light refracts through it. This coloring occurs on the tantalum electrodes of all types of tantalum capacitors.

Revision: 27-Jun-12

For technical questions, contact: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Rating for rating, tantalum capacitors tend to have as much as three times better capacitance/volume efficiency than aluminum electrolytic capacitors. An approximation of the capacitance/volume efficiency of other types of capacitors may be inferred from the following table, which shows the dielectric constant ranges of the various materials used in each type. Note that tantalum pentoxide has a dielectric constant of 26, some three times greater than that of aluminum oxide. This, in addition to the fact that extremely thin films can be deposited during the electrolytic process mentioned earlier, makes the tantalum capacitor extremely efficient with respect to the number of microfarads available per unit volume. The capacitance of any capacitor is determined by the surface area of the two conducting plates, the distance between the plates, and the dielectric constant of the insulating material between the plates.

COMPARISON OF CAPACITOR DIELECTRIC CONSTANTS

DIELECTRIC

Air or Vacuum 1.0 Paper 2.0 to 6.0 Plastic 2.1 to 6.0 Mineral Oil 2.2 to 2.3 Silicone Oil 2.7 to 2.8 Quartz 3.8 to 4.4 Glass 4.8 to 8.0 Porcelain 5.1 to 5.9 Mica 5.4 to 8.7 Aluminum Oxide 8.4

Tantalum Pentoxide 26

Ceramic 12 to 400K

DIELECTRIC CONSTANT

In the tantalum electrolytic capacitor, the distance between the plates is very small since it is only the thickness of the tantalum pentoxide film. As the dielectric constant of the tantalum pentoxide is high, the capacitance of a tantalum capacitor is high if the area of the plates is large:

where

C = Capacitance

e = Dielectric constant

A = Surface area of the dielectric

t = Thickness of the dielectric

Tantalum capacitors contain either liquid or solid electrolytes. In solid electrolyte capacitors, a dry material (manganese dioxide) forms the cathode plate. A tantalum lead is embedded in or welded to the pellet, which is in turn connected to a termination or lead wire. The drawings show the construction details of the surface mount types of tantalum capacitors shown in this catalog.

Document Number: 40074

Page 13

www.vishay.com

Leadframe

Epoxy

Encapsulation

Anode

Polarity Bar

Solderable

Cathode

Termination

Silver

Adhesive

MnO

/Carbon/

Silver Coating

Solderable Anode

Termination

Sintered Tantalum

Molded Guide

Vishay Sprague

SOLID ELECTROLYTE TANTALUM CAPACITORS

Solid electrolyte capacitors contain manganese dioxide, which is formed on the tantalum pentoxide dielectric layer by impregnating the pellet with a solution of manganous nitrate. The pellet is then heated in an oven, and the manganous nitrate is converted to manganese dioxide.

The pellet is next coated with graphite, followed by a layer of metallic silver, which provides a conductive surface between the pellet and the Leadframe.

Molded Chip tantalum capacitor encases the element in plastic resins, such as epoxy materials. After assembly, the capacitors are tested and inspected to assure long life and reliability. It offers excellent reliability and high stability for consumer and commercial electronics with the added feature of low cost

Surface mount designs of “Solid Tantalum” capacitors use lead frames or lead frameless designs as shown in the accompanying drawings.

TANTALUM CAPACITORS FOR ALL DESIGN CONSIDERATIONS

Solid electrolyte designs are the least expensive for a given rating and are used in many applications where their very small size for a given unit of capacitance is of importance. They will typically withstand up to about 10 % of the rated DC working voltage in a reverse direction. Also important are their good low temperature performance characteristics and freedom from corrosive electrolytes.

Vishay Sprague patented the original solid electrolyte capacitors and was the first to market them in 1956. Vishay Sprague has the broadest line of tantalum capacitors and has continued its position of leadership in this field. Data sheets covering the various types and styles of Vishay Sprague capacitors for consumer and entertainment electronics, industry, and military applications are available where detailed performance characteristics must be specified.

MOLDED CHIP CAPACITOR, ALL TYPES EXCEPT 893D/TF3/T86

MOLDED CHIP CAPACITOR WITH BUILT-IN FUSE, TYPES 893D/TF3/T86

Epoxy Encapsulation

Silver Adhesive

Solderable Cathode

Termination

MnO

/Carbon/Silver

Coating

Sintered Tantalum

Pellet

For technical questions, contact: [email protected]

Fusible

Wire

Lead Frame

Revision: 27-Jun-12

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Anode Polarity Bar

Solderable

Anode Termination

Document Number: 40074

Page 14

www.vishay.com

COMMERCIAL PRODUCTS

SOLID TANTALUM CAPACITORS - MOLDED CASE

SERIES 293D

PRODUCT IMAGE

793DE-793DX-

CTC3-CTC4

Molded Guide

Vishay Sprague

593D TR3 TP3 TL3

TYPE Surface mount T

FEATURES

TEMPERATURE RANGE

CAPACITANCE RANGE

VOLTAGE RANGE 4 V to 63 V 4 V to 50 V 4 V to 50 V 4 V to 63 V 4 V to 50 V 4 V to 50 V CAPACITANCE

TOLERANCE

LEAKAGE CURRENT

DISSIPATION FACTOR

CASE CODES A, B, C, D, E, V A, B, C, D A, B, C, D, E A, B, C, D, E, V, W A, B, C, D, E A, B, C, D, E TERMINATION 100 % matte tin standard, tin/lead available

Standard

industrial grade

0.1 µF to 1000 µF 0.1 µF to 100 µF 1 µF to 470 µF 0.47 µF to 1000 µF 0.1 µF to 470 µF 0.1 µF to 470 µF

4 % to 30 % 4 % to 6 % 4 % to 15 % 4 % to 30 % 4 % to 15 % 4 % to 15 %

CECC approved Low ESR Low ESR

0.01 CV or 0.5 A, whichever is greater

ANTAMOUNT

, molded case

- 55 °C to + 125 °C

± 10 %, ± 20 %

High performance,

automotive grade

Very low DCL

0.005 CV or

0.25 A,

whichever is

greater

SOLID TANTALUM CAPACITORS - MOLDED CASE

SERIES TH3 TH4 TH5 893D TF3

PRODUCT IMAGE

TYPE Surface mount T

FEATURES

TEMPERATURE RANGE

CAPACITANCE RANGE

VOLTAGE RANGE 6.3 V to 50 V 6.3 V to 16 V 21 V 4 V to 50 V 4 V to 50 V CAPACITANCE

TOLERANCE LEAKAGE

CURRENT DISSIPATION

FACTOR CASE CODES A, B, C, D, E B, C E C, D, E C, D, E

TERMINATION

Revision: 27-Jun-12

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

High temperature

+ 150 °C,

automotive grade

- 55 °C to + 150 °C - 55 °C to + 175 °C - 55 °C to + 200 °C - 55 °C to + 125 °C

0.33 µF to 220 µF 10 µF to 47 µF 10 µF 0.47 µF to 680 µF 0.47 µF to 470 µF

4 % to 8 % 4.5 % to 6 % 6 % 6 % to 15 % 6 % to 15 %

100 % matte tin

standard, tin/lead and

gold plated available

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

High temperature

+ 175 °C,

automotive grade

0.01 CV or 0.5 A, whichever is greater

100 % matte tin Gold plated 100 % matte tin standard, tin/lead available

For technical questions, contact: [email protected]

ANTAMOUNT

Very high temperature

+ 200 °C

± 10 %, ± 20 %

, molded case

Built-in fuse

Built-in fuse,

low ESR

Document Number: 40074

Page 15

Molded Guide

www.vishay.com

HIGH RELIABILITY PRODUCTS

SOLID TANTALUM CAPACITORS - MOLDED CASE

SERIES T83 T86 CWR11 04053 95158

PRODUCT IMAGE

Vishay Sprague

ANTAMOUNT

TYPE

FEATURES

TEMPERATURE RANGE

CAPACITANCE RANGE

VOLTAGE RANGE 4 V to 63 V 4 V to 50 V

CAPACITANCE TOLERANCE

LEAKAGE CURRENT 0.01 CV or 0.5 A, whichever is greater

DISSIPATION FACTOR 4 % to 15 % 6 % to 16 % 4 % to 6 % 4 % to 8 % 4 % to 12 %

CASE CODES A, B, C, D, E C, D, E A, B, C, D C, D, E C, D, E

TERMINATION

High reliability,

standard and

low ESR

0.1 µF to 470 µF 0.47 µF to 330 µF 0.1 µF to 100 µF 0.47 µF to 470 µF 4.7 µF to 220 µF

100 % matte tin; tin/lead;

tin/lead solder fused

, molded case,

Hi-Rel. COTS

High reliability,

built-in fuse,

standard and

low ESR

± 10 %, ± 20 %

MIL-PRF-55365/8

qualified

- 55 °C to + 125 °C

± 5 %, ± 10 %,

± 20 %

Tin/lead;

tin/lead solder fused

TANTAMOUNT®, molded case,

DLA approved

Built-in fuse Low ESR

± 20 % ± 10 %, ± 20 %

Tin/lead

solder plated

Tin/lead

solder plated;

gold plated

Revision: 27-Jun-12

For technical questions, contact: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Document Number: 40074

Page 16

0.004 [0.1] MAX.

Tape thickness

MAX.

(Note 6)

0.014 [0.35] MAX.

± 0.008 [0.200]

Embossment

0.069 ± 0.004 [1.75 ± 0.10]

MIN. for components

0.079 x 0.047 [2.0 x 1.2] and larger . (Note 5)

Maximum cavity size (Note 1)

USER DIRECTION OF FEED

Center lines of cavity

0.030 [0.75] MIN. (Note 4)

0.030 [0.75] MIN. (Note 3)

0.079 ± 0.002 [2.0 ± 0.05]

0.157 ± 0.004 [4.0 ± 0.10]

0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0]

Maxim um component rotation

(Side or front sectional view)

20°

For tape feeder reference only including draft. Concentric around B

(Note 5)

Deformation between embossments

Top cover tape

10 pitches cumulative tolerance on tape

Direction of Feed

Anode (+)

Cathode (-)

20° maximum component rotation

Typical component cavity center line

Typical component center line

(Top view)

www.vishay.com

PLASTIC TAPE AND REEL PACKAGING in inches [millimeters]

Molded Guide

Vishay Sprague

3.937 [100.0]

0.039 [1.0] MAX.

Tape

0.039 [1.0] MAX.

Camber

(top view) Allowable camber to be 0.039/3.937 [1/100] non-cumulative over 9.843 [250.0]

0.9843 [250.0]

Tape and Reel Specifications: All case sizes are available on plastic embossed tape per EIA-481. Standard reel diameter is 7" [178 mm], 13" [330 mm] reels are available and recommended as the most cost effective packaging method.

The most efficient packaging quantities are full reel increments on a given reel diameter. The quantities shown allow for the sealed empty pockets required to be in conformance with EIA-481. Reel size and packaging orientation must be specified in the Vishay Sprague part number.

Notes

• Metric dimensions will govern. Dimensions in inches are rounded and for reference only.

(1)

A0, B0, K0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and/or the body dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A rotation of the component within the cavity of not more than 20°.

(2)

Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide “R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum.

(3)

This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed cavities or to the edge of the cavity whichever is less.

(4)

This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier tape between the embossed cavity or to the edge of the cavity whichever is less.

(5)

The embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. Dimensions of embossement location shall be applied independent of each other.

(6)

B1 dimension is a reference dimension tape feeder clearance only.

CASE CODE

293D - 593D - 893D - TR3 - TH3 - TF3 - TP3 - 793DE/793DX/CTC3/CTC4

Revision: 27-Jun-12

, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent

TAPE

SIZE

8 mm

B C D E V

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

12 mm

(MAX.)

0.165 [4.2]

0.32 [8.2]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

(MIN.)

0.039 [1.0]

0.059 [1.5]

For technical questions, contact: [email protected]

0.138 ± 0.002 [3.5 ± 0.05]

0.217 ± 0.00 [5.5 ± 0.05]

(MAX.)

0.094

0.177

[2.4]

[4.5]

0.157 ± 0.004 [4.0 ± 1.0]

0.315 ± 0.004 [8.0 ± 1.0]

0.315 ± 0.012 [8.0 ± 0.30]

0.472 ± 0.012

[12.0 ± 0.30]

Document Number: 40074

Page 17

TEMPERATURE (°C)

TIME (s)

Time 25 °C to peak

TC = 5 °C

s max.

s min.

Preheat area

Max. ramp-up rate = 3 °C/s Max. ramp-down rate = 6 °C/s

Molded Guide

www.vishay.com

RECOMMENDED REFLOW PROFILES

Capacitors should withstand Reflow profile as per J-STD-020 standard

PROFILE FEATURE SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY Preheat/soak

Temperature min. (T Temperature max. (T

) from (Ts

Time (t

Ramp-up

Ramp-up rate (T Liquidous temperature (T Time (t

) maintained above T

Peak package body temperature (T

) within 5 °C of the specified

Time (t

classification temperature (T Time 25 °C to peak temperature 6 min max. 8 min max.

Ramp-down

Ramp-down rate (T

) 100 °C 150 °C

s min.

) 150 °C 200 °C

s max.

to T

min.

to Tp) 3 °C/s max. 3 °C/s max.

to TL) 6 °C/s max. 6 °C/s max.

) 60 s to 120 s 60 s to 120 s

s max.

) 183 °C 217 °C

) Depends on case size - see table below

)

60 s to 150 s 60 s to 150 s

20 s 30 s

Vishay Sprague

PEAK PACKAGE BODY TEMPERATURE (Tp)

CASE CODE

SnPb EUTECTIC PROCESS LEAD (Pb)-FREE PROCESS

A, B, C, V 235 °C 260 °C

D, E, W 220 °C 250 °C

PEAK PACKAGE BODY TEMPERATURE (T

PAD DIMENSIONS in inches [millimeters]

CASE CODE

(MIN.)

293D - 593D - 893D - TR3 - TL3 - TH3 - TH4 - TH5 - TF3 - TP3 - 793DE/793DX/CTC3/CTC4 - T83 - T86 - CWR11 - 95158 - 04053

A 0.071 [1.80] 0.067 [1.70] 0.053 [1.35] 0.187 [4.75] B 0.118 [3.00] 0.071 [1.80] 0.065 [1.65] 0.207 [5.25] C 0.118 [3.00] 0.094 [2.40] 0.118 [3.00] 0.307 [7.80] D 0.157 [4.00] 0.098 [2.50] 0.150 [3.80] 0.346 [8.80]

E 0.157 [4.00] 0.098 [2.50] 0.150 [3.80] 0.346 [8.80]

V 0.157 [4.00] 0.098 [2.50] 0.150 [3.80] 0.346 [8.80]

Revision: 27-Jun-12

W 0.185 [4.70] 0.098 [2.50] 0.150 [3.80] 0.346 [8.80]

For technical questions, contact: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

(NOM.)

Document Number: 40074

)

(NOM.)

Page 18

RMS

ESR

------------=

RMS

x Z=

RMS

ESR

------------=

www.vishay.com

GUIDE TO APPLICATION

1. AC Ripple Current: The maximum allowable ripple current shall be determined from the formula:

Molded Guide

Vishay Sprague

6. Printed Circuit Board Materials: Molded capacitors are compatible with commonly used printed circuit board materials (alumina substrates, FR4, FR5, G10, PTFE-fluorocarbon and porcelanized steel).

where,

P = Power dissipation in W at + 25 °C as given in

the tables in the product datasheets (Power Dissipation).

= The capacitor equivalent series resistance at

ESR

the specified frequency

2. AC Ripple Voltage: The maximum allowable ripple voltage shall be determined from the formula:

7. Attachment:

7.1 Solder Paste: The recommended thickness of the solder paste after application is 0.007" ± 0.001" [0.178 mm ± 0.025 mm]. Care should be exercised in selecting the solder paste. The metal purity should be as high as practical. The flux (in the paste) must be active enough to remove the oxides formed on the metallization prior to the exposure to soldering heat. In practice this can be aided by extending the solder preheat time at temperatures below the liquidous state of the solder.

or, from the formula:

7.2 Soldering: Capacitors can be attached by conventional soldering techniques; vapor phase, convection reflow, infrared reflow, wave soldering, and hot plate methods. The soldering profile charts show recommended time/temperature conditions for

where, P = Power dissipation in W at + 25 °C as given in

the tables in the product datasheets (Power Dissipation).

= The capacitor equivalent series resistance at

ESR

the specified frequency

Z = The capacitor impedance at the specified

frequency

soldering. Preheating is recommended. The recommended maximum ramp rate is 2 °C per s. Attachment with a soldering iron is not recommended due to the difficulty of controlling temperature and time at temperature. The soldering iron must never come in contact with the capacitor.

7.2.1 Backward and Forward Compatibility: Capacitors with SnPb or 100 % tin termination finishes can be soldered using SnPb or lead (Pb)-free soldering processes.

2.1 The sum of the peak AC voltage plus the applied DC voltage shall not exceed the DC voltage rating of the capacitor.

2.2 The sum of the negative peak AC voltage plus the applied DC voltage shall not allow a voltage reversal exceeding 10 % of the DC working voltage at + 25 °C.

3. Reverse Voltage: Solid tantalum capacitors are not intended for use with reverse voltage applied. However, they have been shown to be capable of withstanding momentary reverse voltage peaks of up to 10 % of the DC rating at 25 °C and 5 % of the DC rating at + 85 °C.

4. Temperature Derating: If these capacitors are to be operated at temperatures above + 25 °C, the permissible RMS ripple current or voltage shall be calculated using the derating factors as shown:

TEMPERATURE DERATING FACTOR

+ 25 °C 1.0 + 85 °C 0.9

+ 125 °C 0.4

8. Cleaning (Flux Removal) After Soldering: Molded capacitors are compatible with all commonly used solvents such as TES, TMS, Prelete, Chlorethane, Terpene and aqueous cleaning media. However, CFC/ODS products are not used in the production of these devices and are not recommended. Solvents containing methylene chloride or other epoxy solvents should be avoided since these will attack the epoxy encapsulation material.

8.1 When using ultrasonic cleaning, the board may resonate if the output power is too high. This vibration can cause cracking or a decrease in the adherence of the termination. DO NOT EXCEED 9W/l at 40 kHz for 2 min.

9. Recommended Mounting Pad Geometries: Proper mounting pad geometries are essential for successful solder connections. These dimensions are highly process sensitive and should be designed to minimize component rework due to unacceptable solder joints. The dimensional configurations shown are the recommended pad geometries for both wave and reflow soldering techniques. These dimensions are intended to be a starting point for circuit board

5. Power Dissipation: Power dissipation will be affected by the heat sinking capability of the mounting surface. Non-sinusoidal ripple current may produce heating effects which differ from those shown. It is important that the equivalent I be established when calculating permissible

RMS

value

designers and may be fine tuned if necessary based upon the peculiarities of the soldering process and/or circuit board design.

operating levels. (Power dissipation calculated using + 25 °C temperature rise).

Revision: 27-Jun-12

For technical questions, contact: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Document Number: 40074

Page 19

Typical Performance Characteristics

www.vishay.com

Vishay Sprague

Typical Performance Characteristics Tantalum Capacitors

CAPACITOR ELECTRICAL PERFORMANCE CHARACTERISTICS

ITEM PERFORMANCE CHARACTERISTICS

Category temperature range - 55 °C to + 85 °C (to + 125 °C with voltage derating)

Capacitance tolerance ± 20 %, ± 10 % (at 120 Hz) 2 V

Dissipation factor Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz

ESR Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 100 kHz

Leakage current After application of rated voltage applied to capacitors for 5 min using a steady source of power with

Capacitance change by temperature + 12 % max. (at + 125 °C)

Reverse voltage Capacitors are capable of withstanding peak voltages in the reverse direction equal to:

Temperature derating If capacitors are to be used at temperatures above + 25 °C, the permissible RMS ripple current or voltage

Operating temperature + 85 °C + 125 °C

1 k resistor in series with the capacitor under test, leakage current at 25 °C is not more than 0.01 CV or

0.5 μA, whichever is greater. Note that the leakage current varies with temperature and applied voltage.

See graph below for the appropriate adjustment factor.

+ 10 % max. (at + 85 °C)

- 10 % max. (at - 55 °C)

10 % of the DC rating at + 25 °C 5 % of the DC rating at + 85 °C Vishay does not recommend intentional or repetitive application of reverse voltage

shall be calculated using the derating factors:

1.0 at + 25 °C

0.9 at + 85 °C

0.4 at + 125 °C

RATED VOLTAGE

(V)

4 5.2 2.7 3.4

6.3 8 4 5

10 13 7 8

16 20 10 12

20 26 13 16

25 32 17 20

35 46 23 28

50 65 33 40

(1)

63 76 42 50

(max.) at + 25 °C using a capacitance bridge

RMS

For capacitance value > 300 μF + 20 % max. (at + 125 °C) + 15 % max. (at + 85 °C)

- 15 % max. (at - 55 °C)

SURGE VOLTAGE

(V)

60 33 40

RATED VOLTAGE

(V)

SURGE VOLTAGE

(V)

Notes

• All information presented in this document reflects typical performance characteristics

(1)

Capacitance values 15 μF and higher

Revision: 27-Feb-13

For technical questions, contact: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Document Number: 40088

Page 20

Leakage Current Factor

Percent of Rated Voltage

100

1.0

0.1

0.01

0.001

0 10 20 30 40 50 60 70 80 90 100

+ 125 °C

+ 85 °C

+ 55 °C

+ 25 °C

- 55 °C

+ 150 °C

0 °C

Typical Performance Characteristics

www.vishay.com

TYPICAL LEAKAGE CURRENT FACTOR RANGE

Notes

• At + 25 °C, the leakage current shall not exceed the value listed in the Standard Ratings table.

• At + 85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings table.

• At + 125 °C, the leakage current shall not exceed 12 times the value listed in the Standard Ratings table.

Vishay Sprague

CAPACITOR PERFORMANCE CHARACTERISTICS

ITEM PERFORMANCE CHARACTERISTICS

Surge voltage Post application of surge voltage (as specified in the table above) in series with a 33  resistor at the rate of 30 s

Surge current After subjecting parts in series with a 1  resistor at the rate of 3 s CHARGE, 3 s DISCHARGE, and a cap bank of

Life test at + 85 °C Capacitors meet the characteristic requirements listed below. After 2000 h application of rated voltage at 85 °C.

Life test at + 125 °C Capacitors meet the characteristic requirements listed below. After 1000 h application 2/3 of rated voltage at 125 °C.

ON, 30 s OFF, for 1000 successive test cycles at 85 °C, capacitors meet the characteristics requirements listed below.

Capacitance change Dissipation factor Leakage current

100K μF for 3 successive test cycles at 25 °C, capacitors meet the characteristics requirements listed below.

Capacitance change Dissipation factor Leakage current

Capacitance change Leakage current

Capacitance change for parts with cap.  600 μF for parts with cap. > 600 μF Leakage current

Within ± 10 % of initial value Initial specified value or less Initial specified value or less

Within ± 10 % of initial value Shall not exceed 125 % of initial value

Within ± 10 % of initial value Within ± 20 % of initial value Shall not exceed 125 % of initial value

Revision: 27-Feb-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

For technical questions, contact: [email protected]

Document Number: 40088

Page 21

Typical Performance Characteristics

www.vishay.com

CAPACITOR ENVIRONMENTAL CHARACTERISTICS

ITEM CONDITION ENVIRONMENTAL CHARACTERISTICS

Humidity tests At 40 °C/90 % RH 1000 h, no voltage applied. Capacitance change

Temperature cycles At - 55 °C/+ 125 °C, 30 min each, for 5 cycles. Capacitance change

Moisture resistance MIL-STD-202, method 106 at rated voltage,

42 cycles.

Thermal shock Capacitors are subjected to 5 cycles of the

following:

- 55 °C (+ 0 °C, - 5 °C) for 30 min, then + 25 °C (+ 10 °C, - 5 °C) for 5 min, then + 125 °C (+ 3 °C, - 0 °C) for 30 min, then + 25 °C (+ 10 °C, - 5 °C) for 5 min

Cap.  600 μF Cap. > 600 μF Dissipation factor

Cap.  600 μF Cap. > 600 μF Dissipation factor Leakage current

Capacitance change Cap.  600 μF Cap. > 600 μF Dissipation factor Leakage current

Vishay Sprague

Within ± 10 % of initial value Within ± 20 % of initial value Not to exceed 150 % of initial + 25 °C requirement

Within ± 10 % of initial value Within ± 20 % of initial value Initial specified value or less Initial specified value or less

MECHANICAL PERFORMANCE CHARACTERISTICS

TEST CONDITION CONDITION POST TEST PERFORMANCE

Shear test Apply a pressure load of 5 N for 10 s ± 1 s

Substrate bend With parts soldered onto substrate test board,

Vibration MIL-STD-202, method 204, condition D, 10 Hz to

Shock MIL-STD-202, method 213B shock (specified

Resistance to solder heat • Recommended reflow profiles temperatures

Solderability MIL-STD-2002, method 208, ANSI/J-STD-002,

Resistance to solvents MIL-STD-202, method 215 Capacitance change

Flammability Encapsulent materials meet UL 94 V-0 with an

Revision: 27-Feb-13

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

horizontally to the center of capacitor side body.

apply force to the test board for a deflection of 3 mm, for a total of 3 bends at a rate of 1 mm/s.

2000 Hz, 20 g peak

pulse), condition I, 100 g peak

and durations are located within the Capacitor Series Guides

• Pb-free and lead-bearing series caps are backward and forward compatible

test B. Applies only to solder and tin plated terminations. Does not apply to gold terminations.

oxygen index of 32 %.

For technical questions, contact: [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Capacitance change Dissipation factor Leakage current

There shall be no mechanical or visual damage to capacitors post-conditioning.

Capacitance change Dissipation factor Leakage current

There shall be no mechanical or visual damage to capacitors post-conditioning.

Capacitance change Dissipation factor Leakage current

There shall be no mechanical or visual damage to capacitors post-conditioning.

Capacitance change Dissipation factor Leakage current

There shall be no mechanical or visual damage to capacitors post-conditioning.

Capacitance change Dissipation factor Leakage current

There shall be no mechanical or visual damage to capacitors post-conditioning.

Dissipation factor Leakage current

There shall be no mechanical or visual damage to capacitors post-conditioning.

Within ± 10 % of initial value Initial specified value or less Initial specified value or less

Document Number: 40088

Page 22

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000