
WAGO 221:
The COMPACT Splicing Connectors for All Conductor Types
WAGO 222:
The CLASSIC Splicing Connectors for All Conductor Types
222-505
Strain Relief Plate, for
221-412
0.14 … 4 mm²
0.2 … 4 mm²
450 V / 4 kV / 2
32 A
Ambient operating temperature:
max. 85 °C (T85)
221-413 221-415
221-500
Mounting Carrier, for
2-, 3- and 5-conductor connectors
mounting on 221-500
222-510
Angled DIN-Rail
Adapter, for horizontal
mounting of 222-500
Carrier on DIN-35 rail
WAGO 2273:
The COMPACT Junction Box Connectors
2273-202
2273-205 2273-208
0.5 … 2.5 mm
450 V / 4 kV / 2
24 A
Ambient operating temperature:
max. 60 °C (T60)
2273-203 2273-204
2
2273-500
Mounting Carrier, for
single- and double-row
connectors
222-413 222-415222-412
222-500
Mounting Carrier, for
2-, 3- and 5-conductor
connectors
2
0.08 … 4 mm
0.08 … 2.5 mm
400 V / 4 kV / 2
32 A
Ambient operating temperature:
max. 40 °C
2
WAGO 773:
The Junction Box Connectors up to 4 mm
773-604 773-606773-602
1.5 … 4 mm2
400 V / 4 kV / 2
32 A
Ambient operating temperature:
max. 60 °C
773-332
Mounting Carrier, for
up to four junction box
connectors
222-505
Strain Relief Plate, for
222-500 Mounting
Carrier
222-510
Angled DIN-Rail Adapter,
for horizontal mounting
of 222-500 Carrier on
DIN-35 rail
2
WAGO 224:
The Lighting and Service Connectors
224-101
Installation side: 1 … 2.5 mm
Lighting side: 0.5 … 2.5 mm
400 V / 4 kV / 2
24 A
Ambient operating temperature:
max. 60 °C (gray and white)
max. 75 °C (black)
224-104
2
2
224-112
224-114
224-201
0.5 … 2.5 mm
400 V / 4 kV / 2
24 A
Ambient operating temperature:
max. 60 °C
2
Vario-T-BOXX
887-912
Compact selection of the new WAGO
221 Series in high-quality Sortimo®
plastic case
WAGO 773:
The SPECIAL Junction Box Connectors
773-173
2.5 … 6 mm
400 V / 4 kV / 2
41 A
Ambient operating
temperature: max. 60 °C
2
773-108
0.75 … 2.5 mm
1.5 … 2.5 mm
400 V / 4 kV / 2
24 A
Ambient operating temperature:
max. 60 °C
2
2
WAGO 243:
The MICRO Junction Box Connectors
243-204
243-208
243-804
243-808
243-112
Mounting Carrier,
for four connectors
243-304
243-308
773-332
Mounting Carrier, for up
to two SPECIAL Junction
Box Connectors
243-504
243-508
243-211
243-113
Mounting Carrier,
for six connectors
0.6 … 0.8 mm Ø
100 V / 1.5 kV / 2
6 A
Ambient operating temperature:
max. 60 °C
243-212
When using conductors of exclusively the same diameter,
0.5 mm or 1 mm diameters are also possible!

New Mounting Carrier:
The 221 Series Conquers Distribution Cabinets
Easily accessible, simple to assign, transparent
structures, and all of this according to standards:
With the new mounting carrier, electricians can
also use WAGO’s popular 221 Series COMPACT
Splicing Connectors in distribution cabinets –
while meeting valid VDE standards. The carrier
provides secure mount to the DIN-rail and easy
marking for the compact and user-friendly connectors.
Strain relief via cable ties on
the mounting carrier
(perpendicular to the connectors’ wiring direction)
Vertical DIN-35 rail mounting
with strain relief plate or screw
mounting on smooth surfaces
Horizontal mounting on
DIN-35 rail via angled DIN-rail
adapter
Horizontal screw mounting
with strain relief plate on
smooth surfaces

WAGO Kontakttechnik GmbH & Co. KG
Postfach 2880 · 32385 Minden
Hansastraße 27 · 32423 Minden
info@wago.com
www.wago.com
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.
“Copyright – WAGO Kontakttechnik GmbH & Co. KG – All rights reserved. The contents and structure of the WAGO Websites, catalogs, videos and other WAGO media are subject to copyright protection. Distribution or modication to the contents of these pages and videos is prohibited. Furthermore, the content may neither be copied nor made available to third parties
for commercial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties.”
Headquarters +49 571/ 887 - 0
Sales +49 571/ 887 - 222
Order Service +49 571/ 887 - 44333
Fax +49 571/ 887 - 844169
0888-0211/0201-6901 – INSTALLATION CONNECTORS FLYER 2.1 US – 02/2016-00 – Printed in Germany – Subject to design changes