Datasheet 221-2515 Specification

Page 1
Data Sheet | Item Number: 221-2515
Mounting carrier with strain relief; 5-way; for inline splicing connector with lever; with snap-in mounting foot; gray
https://www.wago.com/221-2515
Color:gray
Continued on next page Version 08.10.2024 Page1/4
Page 2
Data Sheet | Item Number: 221-2515
https://www.wago.com/221-2515
Width47.8 mm / 1.882 inches
Height11.03 mm / 0.434 inches
Height from the surface6.5 mm / 0.256 inches
Depth100 mm / 3.937 inches
Drilled hole diameter for snap-in mounting foot with tolerance3.5 mm
.
Mechanical data
Design5-way
Mounting typeSnap-in foot
.
Material data
Note (material data)
Colorgray
Fire load0.307 MJ
Weight10.2 g
.
Information on material specifications can be found her e
Commercial data
ETIM 9.0EC002848
ETIM 8.0EC002848
PU (SPU)25 (5) pcs
Packaging typeBox
Country of originCN
GTIN4066966119916
Customs tariff number39269097900
.

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption
.

Downloads

Environmental Product Compliance
Compliance Search
Environmental Product Compliance 221-2515
.

CAD/CAE-Data

CAD data
2D/3D Models 221-2515
.
Page2/4
CAE data
EPLAN Data Portal 221-2515
ZUKEN Portal 221-2515
.
Continued on next page Version 08.10.2024
Page 3
Data Sheet | Item Number: 221-2515
https://www.wago.com/221-2515

1 Compatible Products

1.1 Optional Accessories

1.1.1 Installation

1.1.1.1 Mounting accessories
Item No.: 209-119
Fixing screw; for 209-120 mounting carri er
.

1.1.2 Marking

1.1.2.1 Marking strip
Item No.: 210-834
Marking strips; on reel; 5 mm wide; plain; Self-adhesive; white
.

Installation Notes

Installation
Item No.: 209-123
Mounting foot with screw; can be screwed on terminal blocks with fixing flange; 6.4 mm wide; gray
Item No.: 209-120
Mounting foot; can be snapped on termi nal blocks with snap-in mounting foot; for mounting on relay-modules; 6.4 mm wide; gray
Place the inline splicing connector on the carrier in front of the mounting position.
.
Various combinations of 1- to 5-connector mounting carriers are possible via side-by­side latching mechanism.
.
Strain relief
3-pole mounting carrier with strain relief
.
Push the connector to the center positi on until it snaps into place.
Mounting carrier without strain relief – snapped onto DIN-rail
Page3/4
Continued on next page Version 08.10.2024
Page 4
Subject to changes. Please also observe the further product documentation!
Current addresses can be found at:: www.wago. com
Page4/4
Version 08.10.2024
Loading...