Page 1
COLOR TV
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CHASSIS : MC-059C
MODEL : 21FS7RG/RE/RGG
21FS7RG/RE/RGG-TS
website:http://biz.LGservice.com
Nov., 2007
Printed in ChinaP/NO : 38289S0050K
Internal Use Only
Page 2
- 2 -
CONTENTS
CONTENTS............................................................................................... 2
SAFETY PRECAUTIONS...........................................................................3
DESCRIPTION OF CONTROLS................................................................4
SPECIFICATIONS......................................................................................6
ADJUSTMENT ...........................................................................................8
PRINTED CIRCUIT BOARD ....................................................................15
TROUBLE SHOOTING ............................................................................17
BLOCK DIAGRAM...................................................................................21
EXPLODED VIEW....................................................................................22
EXPLODED VIEW PARTS LIST..............................................................23
REPLACEMENT PARTS LIST................................................................ 24
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 3
- 3 -
SAFETY PRECAUTIONS
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the
Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent
X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
General Guidance
An isolation Transformer should always be used during the
servicing of a receiver whose chassis is not isolated from the AC
power line. Use a transformer of adequate power rating as this
protects the technician from accidents resulting in personal injury
from electrical shocks.
It will also protect the receiver and it's components from being
damaged by accidental shorts of the circuitry that may be
inadvertently introduced during the service operation.
If any fuse (or Fusible Resistor) in this TV receiver is blown,
replace it with the specified.
When replacing a high wattage resistor (Oxide Metal Film Resistor,
over 1W), keep the resistor 10mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Due to high vacuum and large surface area of picture tube,
extreme care should be used in handling the Picture Tube. Do
not lift the Picture tube by it's Neck.
X-RAY Radiation
Warning:
To determine the presence of high voltage, use an accurate high
impedance HV meter.
Adjust brightness, color, contrast controls to minimum.
Measure the high voltage.
The meter reading should indicate
23.5 ± 1.5KV: 14-19 inch, 26 ± 1.5KV: 19-21 inch,
29.0 ± 1.5KV: 25-29 inch, 30.0 ± 1.5KV: 32 inch
If the meter indication is out of tolerance, immediate service and
correction is required to prevent the possibility of premature
component failure.
Before returning the receiver to the customer,
always perform an AC leakage current check on the exposed
metallic parts of the cabinet, such as antennas, terminals, etc., to
be sure the set is safe to operate without damage of electrical
shock.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an
electrical jumper across the two AC plug prongs. Place the AC
switch in the on position, connect one lead of ohm-meter to the AC
plug prongs tied together and touch other ohm-meter lead in turn to
each exposed metallic parts such as antenna terminals, phone
jacks, etc.
If the exposed metallic part has a return path to the chassis, the
measured resistance should be between 1MΩ and 5.2MΩ.
When the exposed metal has no return path to the chassis the
reading must be infinite.
An other abnormality exists that must be corrected before the
receiver is returned to the customer.
Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
and the exposed metallic parts.
Measure the AC voltage across the resistor using AC voltmeter
with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC voltage
measurements for each exposed metallic part. Any voltage
measured must not exceed 0.75 volt RMS which is corresponds to
0.5mA.
In case any measurement is out of the limits specified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.
Leakage Current Hot Check circuit
The source of X-RAY RADIATION in this TV receiver is the High
Voltage Section and the Picture Tube.
For continued X-RAY RADIATION protection, the replacement
tube must be the same type tube as specified in the
Replacement Parts List.
IMPORTANT SAFETY NOTICE
0.15uF
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
AC Volt-meter
Good Earth Ground
such as WATER PIPE,
To Instrument’s
exposed
METALLIC PARTS
CONDUIT etc.
1.5 Kohm/10W
Page 4
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control handset, please install the batteries. See the next page.
1. POWER
switches the set on from standby or off to standby.
2. NUMBER BUTTONS
switches the set on from standby or directly select a number.
3. MENU
selects a menu.
4. EYE/*(option)
switches the eye function on or off.
5.
/
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
scans programmes automatically.
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection or displays the current mode.
6. Q.VIEW
returns to the previously viewed programme.
7. PSM (Picture Status Memory)
recalls your preferred picture setting.
8. FAVOURITE
selects a favorite programme.
( )
( )
POWER MUTE
123
456
789
MENU
TV/AV
0
EYE/
Q.VIEW
LIST
I / II /
( )
PR
( )
PR
OK
VOLVOL
PSM SSM/ SLEEP
FAVOURITE
1
2
3
4
5
6
7
8
- 4 -
DESCRIPTION OF CONTROLS
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 5
- 5 -
9. MUTE
switches the sound on or off.
10. TV/AV
selects TV or AV mode.
switches the set on from standby.
11. I/II/*(option)
selects the language during dual language broadcast. (option)
selects the sound output.
12. LIST
displays the programme table.
13. SLEEP
sets the sleep timer.
14. SSM/*(Sound Status Memory) (option)
recalls your preferred sound setting.
COLOURED BUTTONS : These buttons are used for teletext (only
TELETEXT models) or programme edit.
POWER MUTE
1 2 3
4 5 6
7 8 9
MENU
TV/AV
0
EYE/
Q.VIEW
LIST
I / II /
( )
PR
( )
PR
OK
VOLVOL
PSM SSM/ SLEEP
FAVOURITE
9
10
11
12
13
14
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 6
V Scope
This specification is applied to all the television related to MC059C Chassis.
V Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25 ± 5°C (77 ± 9°F), CST : 40 ± 5
(CST must be tested 40
± 5°C . Humidity : 50%)
2) Relative Humidity : 65
± 10%
3) Power Voltage : Standard input Voltage (AC110-240V~,
50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
V Test Method
1) Performance : LGE TV test method followed.
2) Demanded other specification
- CCC
- Safety : K60065
- 6 -
A General specification
SPECIFICATIONS
Note : Specification and others are subject to change without notice for improvement.
Item
Receiving System
Available Channel
Input Voltage
Market
Screen Size
Aspect Ratio
Display Method
Tuning System
Operating Environment
Storage Environment
Specification
PAL BG, DK, I / NTSC M (AV 3.58/ 4.43)
SECAM DK
VHF : E2 ~ E12
UHF : E21 ~ E69
CATV : S1 ~ S20
HYPER : S21 ~ S41
AC100 - 240V~, 50/60Hz
China, Indonesia, Thai, Vietnam, CIS
14 ~ 21inch (FLAT / Conventional)
4:3
CRT
FVS
Temp : 0 ~ 40 deg
Humidity : ~ 85 %
Temp : -20 ~ 60 deg
Humidity : ~ 90 %
Remark
China/ Indonesia/ Thai/ Vietnam
CIS
No.
1
2
3
4
5
6
7
8
9
10
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 7
- 7 -
A Features and Function
Item
Feature AV Input
AV Output
Component
Earphone
Key Local Key
Remocon
Channel Auto prog.
Manual
Prog. edit
Favorite
Picture PSM
User Control
Sound SSM
Treble/ Bass
Equalizer
FM Transmitter
Timer Clock
Off time
On time
Auto off
Special Language
Input
Child lock
Etc. Sleep
Review
Specification
2 AV 1, 2
1 Monitor out
Input(For component)
1 Front
Power, Vol(
F, G), PR(E, D), MENU, OK
Turbo-Picture, Sound
LG Code (NEC)
System/ Storage/ Normal/ Turbo
Storage/ System/ Channel/ Fine/ Search/ Name
Copy/ Move/ Delete/ Skip
8 Channel
Dynamic/ Standard/ Mild/ Game/ User
Contrast/ Brightness/ Color/ Sharpness
Tint (NTSC-M Only)
Flat/ Music/ Movie/ Speech/ User
0 ~ 100
100/ 400/ 1K/ 4K/ 10K
Low Band(7ch)
87.7/ 87.9/ 88.1/ 88.3/ 88.5/ 88.7/ 88.9(MHz)
High Band(7ch)
106.7/ 106.9/ 107.1/ 107.3/ 107.5/ 107.7/
107.9(MHz)
Wide Range(1091ch)
88.0 ~ 107.0MHz
-- : --
-- : -- Off(On)
-- : -- Pr 1 VOL 30 Off(On)
On/ Off
Chinese/ English
English/ Russia
English/ Indonesia/ Thai/ Vietnam
TV/ AV1/ AV2/ Component
On/ Off
Remark
Rear1, Front1(CVBS,L,R)
Rear
Rear(Y,Pb,Pr,DVD-L/R)
7EA/ Front
Option
AV, RF Stereo Option
AV Stereo
RF Stereo
China
CIS
East-Asia
No.
1
2
3
4
5
6
7
8
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 8
1. Scope of Application
These instructions are applied to MC-059C Chassis.
2. Notes
1) Because this is a cold chassis, it is not necessary to use an
isolation transformer. However, operating it using a
transformer between the power supply line and chassis input
to prevent electric shock and to protect the test instrument.
2) All adjustment must be done in the correct sequence.
However, for better productivity, it can be change in a prepermitted range.
3) Environment conditions : If not specified, it must be done in
following conditions.
Temperature : 25 ± 5°C
Humidity 60% ± 10%
4) Power supply of SET : AC100-240~ ± 10%, 50/60Hz
5) If not specified, the receiver must be operated for more than
20 minutes prior to the adjustment.
6) Signal : Received the standard color signal (65±1dBuV).
- NTSC
: LG standard signal means the digital pattern 13CH(480NC)
- PAL/SECAM
: LG standard signal means the digital pattern PAL-B/G 05CH
7) If not specified, APC ON is APC CLEAR(DYNAMIC)
3. AGC Voltage Adjustment
3-1. Necessary Instrument
: Digital Multi-meter-1 set
- Max Input Current : Over 1A/ Max Input Voltage : 500Vdc
- Measurement Range : 10mV-100mVdc/ Accuracy : 0.03%
3-2. Adjustment Preparation
1) Input in the 75Ω cable 65dB(±1dB) LG standard signal.
2) Connect the multi-meter to J105(AGC Check, Marking).
3-3. Adjustment
1) Press the “INSTART” key of factory remote control and
select “VP0 (RFAGC)” adjustment mode.
2) Press the VOL+/-(
F/ G) key until the multi-meter shows
reading as shown below.
3) CAUTION
: Since the signal strength can be easily changed by the
condition of signal cable, you need to check the signal
strength frequently in order to prevent error.
4. Screen Voltage Adjustment
4-1. Adjustment of Screen Manually
(Using SVC Remote Control)
1) Input in the 75ohm cable LG standard signal(Digital Pattern,
480NC).
2) Press the “ADJ’ key of factory remote control once to make
the TV set display.
3) Turn the screen volume on the FBT clockwise until the
horizontal line is visible and turn it counterclockwise until
horizontal line faintly visible.
(Exit screen voltage adjustment by press “Enter(
A)” key of
factory remote control.)
5. Purity and Convergence Adjustment
5-1. Purity adjustment
(1) Adjustment Preparation
1) Receive Red Raster Pattern for purity adjustment(51CH).
2) Demagnetize the CPT and Cabinet with a degaussing coil.
(2) Adjustment
1) Pre-adjust the static convergence (STC) with the 4 and
6pole magnet.
2) If the horizontal Line is inline with CPT Mark, 2-Pole
magnet should direct 3-9 o’clock direction.
3) If not, direct 2-pole magnet handle toward 6-12 o’clock
direction and adjust the Horizontal Line to fall onto the
mark opening the magnet at an angle.
4) Push the DY(deflection yoke) all the way to the CPT
funnel.
5) Turn the purity magnet(2-pole magnet) so that the “green”
color portion of left side and the “blue” color portion on the
right side have equal amount of color.
6) Pull the DY slowly backward and fix it when the whole
screen becomes red.
(The specified torque for fixing DY screw should be
10Kg/cm.)
5-2. Convergency Adjustment
(1) Necessary Instrument
1) Degaussing Coil
2) Convergency fixing instrument
(2) Preliminary steps
1) Operate the unit at the least 30minutes before adjustment.
2) Using degaussing coil, remove the stains on CPT &
Cabinet.
3) Received the Cross Hatch Pattern of Convergence.(09ch)
4) Let the Contrast in normal luminance level
.
G R B
- 8 -
ADJUSTMENT
G R B
R
G R B
6700VS0002F
6700PF0002F
6700MF0014A
6700MF0014B
LGIT
SANYO
LGIT
LGIT
3.0 ± 0.05V
2.3 ± 0.05V
2.3 ± 0.05V
2.15 ± 0.05V
70dBu
65dBu
65dBu
65dBu
TAEW-G002D
115-B-A86EL
TAEW-G013D
TAEW-G017D CIS
Tuner P/N Maker AGC Vol Signal Tuner Spec. Remark
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 9
- 9 -
(3) Static Convergence (STC) Adjustment
1) Receive the Cross Hatch Pattern Convergence(09ch).
2) Before adjusting Static Convergence(STC), adjust the
focus first seeing to it that the WHITE color picture quality
is sharp enough.
3) Converge the RED vertical and BLUE vertical line in
unity(same line) by changing the angle between the 2
tabs of 4-pole magnet.
4) Converge the RED horizontal and BLUE horizontal line in
unity(same line) by turning the 2 tabs of the 4-pole
magnet. At this time, do not change the angle between
the 2 tabs.
5) Converge the R, G, B vertical line in unity(same line) by
changing the angle between the 2 tabs of the 6-pole
magnet.
6) Converge the R, G, B horizontal line in unity(same line) by
turning the 2 tabs of the 6-pole magnet. At this time, do
not change the angle between the 2 tabs.
(4) Dynamic Convergence (DYC) Adjustment
1) Y-axis Adjustment
: Adjust convergence of Y-axis(vertical) by moving the
deflection yoke(DY) left and right.
2) X-axis Adjustment
: Adjust convergence of X-axis(horizontal) by moving the
deflection yoke(DY) up and down.
6. White Balance Adjustment
6-1. Necessary Instrument
1) Automatic White Balance Meter(Low/High light Pattern
generator)
2) White Balance meter(CRT Color Analyzer, CA-100) :1set
3) Factory Remote Control
6-2. Adjustment Preparation
: Prior to this adjustment, the Screen Voltage adjustment
should be finished.
6-3. Automatic adjustment
1) Adjust the using Auto White Balance Meter.
2) Enter CPU OFF Mode by pressing “IN-START” & “MUTE”
key of factor remote control in turn before adjustment.
Exit CPU OFF mode by press the “TV/AV” key of factory
remote control after adjustment finished.
* In case there is excess RED color at screen voltage
adjustment, adjust it using “volume - (
F) key of factory remote
control until the RED color disappear.
6-4. Manual adjustment
1) Adjust using white Balance meter and factory remote
control.
2) Enter white balance adjustment mode by pressing
“INSTART” key
3) Use the CH
D, CHE Key to choose adjustment item.
4) Use the VOL
F, VOLG Key to change item data.
5) Adjustment Procedure
a. Make the picture luminance 45Ft-L by changing the
“CONTRAST” and “BRIGHTNESS”.
b. Adjust X data of High light with R-DRIVE(VP7) and Y
data with B-DRIVE(VP9) to have the color temperature
as shown below.
c. Make the picture luminance 4.5Ft-L by changing the
“CONTRAST” and “BRIGHTNESS”.
d. Adjust X data of low light with R-BIAS(VP4) and Y data
with B-BIAS(VP6) to have the color temperature as
shown below.
e. Repeat steps a~d until both low and high light have
same readings as shown below.
7. Focus Voltage Adjustment
This adjustment must be done after operating the TV set
receiver sufficiently.
7-1. Adjustment Preparation
1) Receive Digital pattern and Set the picture condition on
“APC ON”(CLEAR) mode.
7-2. Adjustment
Turn the focus volume on the FBT upper direction th have
the best focus vertical line(figure 1.(a)) and horizontal line
(figure 1(b)) as shown below.
8. SUB-BRIGHTNESS Adjustment
This adjustment must be done after White balance adjustment.
8-1. Adjustment Preparation
1) Receive the LG standard Mono scope pattern(CH14).
2) Set the picture condition on “APC ON”(CLEAR) mode.
8-2. Adjustment
1) Press the “ADJ”key of the factory remote control twice to
enter to “SUB-BRIGHTNESS” adjustment mode.
2) Change the Sub-Brightness data by pressing the VOL
F,
VOL
G key so that the number 1 in gray scale of mono
scope pattern almost disappear.(See figure 2)
8-3. Sub-Tint adjustment
This adjustment has to be done only if the picture has bad tint
otherwise, it can be omitted if the picture has good tint.
1) Receive LG standard pattern signal(SMPTE, 2CH)
2) Set the picture condition on “APC ON”(CLEAR) mode.
Market Color Temperature X-AXIS Y-AXIS
PAL/SECAM 12,000±800 0.270±0.003 0.283±0.003
<Fig. 1>
<Fig. 2> MONO SCOPE Pattern signal
0 1 2 3 4 5 6 7 8 9
Gray Scale
Color Bar
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 10
- 10 -
3) Press the “ADJ” key of the factory remote control three
times to enter to “SUB-TINT” adjustment mode.
4) Change the Sub-Tint data by pressing the VOL
F, VOLG
key until the upper and lower CYAN color becomes same
color.
9. Deflection setting data adjustment
These adjustment will be done by automatic adjustment
Equipment.
For manual adjustment, it is also possible by the following
procedure.
9-1. Adjustment Preparation
1) Deflection setting data adjustment can be done only with
remote control.
2) Press “IN-START” key on factory remote control continuously
to enter to Deflection Adjustment mode.
3) Press the CH
D, E key to select adjustment item.
4) Press the VOL
F, G key to change the data.
9-2. Adjustment
1) Horizontal Position Adjustment
Select VP1(H-POS) and adjust so that the left and right
vertical line are symmetrical as possible.
2) Vertical Position Adjustment
Select VP2(V-POS) and adjust so that the horizontal center
line coincide with geometric horizontal center of the CPT.
3) Vertical Size Adjustment
Select VP3(V-SIZE) and so that the middle circle of the
Digital Pattern(480NC, 13CH) coincide with the effective
screen of CPT
4) H-SIZE
Adjustment of the H-size is not basically done but if the Hsize is inappropriate, the H-size is adjustable by adjusting
variable resistance(VR403) of the main assy.
-> Adjustment for the received pattern is done so that the
outer line of the left, right and the remotest grid will
correspond to the effective boundary surface. (The
remotest grid, NTSC : within 2.5 ~ 3.0 column, PAL :
within 0 ~25 %)
5) Trapezoidal
Adjust a trap by adjusting variable resistance(VR402) of the
main A’ssy.
-> Adjustment is done so that the upper horizontal width of
the received screen and the bottom horizontal width will
be same (when the screen is a trapezoid shape, adjust it
to make a right square)
6) PIN AMP.
Adjust the pin AMP by adjusting variable resistance(VR401)
of the main A’ssy.
-> Adjustment is done so that the vertical line of the remotest
grid at the left or right side of the screen will be parallel to
the vertical line of the center of screen ( or the remotest
grid of CPT)
10. IIC BUS Adjustment Data Table
: Refer to <TABLE 1>
11. Instrument setting data
(automatic adjustment)
<TABLE 2>
12. EEPROM OPTION TABLE
<TABLE 3>
Speed
1
SLave ADD
VIDEO ICBAEEPROM
A2
Delay
30
EEPROM
Sub Add
74 71 76 73
SpeedPlus
Step/Data
3 3 3 3
Sub Add
Start Bit
Stop Bit
Masking
Direction
VCD
TV PC
B(R)AMP
C
6
0
0
1
B(R)CUT
9
7
0
0
1
G(B)AMP
E
6
0
0
1
G(B)CUT
B
7
0
0
1
B AMP B CUT G AMP G CUT
OPTION 1
DVD
TURBO ME
V-CURVE
V-MUTE
EYE
NICAM DT
SND MUTE
GAME
OPTION2
TURBO
ARC
200PR
BLUEBACK
TURBO AT
A2STEREO
SHARP
DVDN 6P
OPTION3
FM TRANS
FM HIGH
NTSC
DUAL SV
SYNC KI
SND FL1
SND FL2
SWOOFER
OPTION 4
SYSTEM
SND MODE
AV
LOC KEY
COLOR T
PLL DIV
OPTION 5
FM PRE
NICAM PRE
SCART PRE
A2 FM TH
FIRST TH
ZWT TH
INITIAL
0
0
0
0
0
0
1
0
0
0
0
1
1
1
0
1
0
0
1
1
0
0
0
0
4
1
2
1
1
31
6
8
2
5
10
7
REMARK
DVD function (1:W, 0:W/O)
T-P,T-S FUNCTION DISPLAY on MENU
VOLUME CURVE (1:HIGH, 0:LOW)
VIDEO MUTE
EYE function (1:W, 0:W/O)
NICAM ID
SOUND MUTE at no signal (yes or not)
GAME function (1:Yes, 0:No)
REMARK
TURBO P/S function (1:W, 0:W/O)
ARC function (1:W, 0:W/O)
200 CH. MEMORY
BLUEBACK function (1:W, 0:W/O)
TURBO SEARCH function (1:W, 0:W/O)
A2 STEREO(WITH NICAM)
SHARPNESS DATA (1:+10, 0:NORMAL)
DVD 6P (1:W, 0:W/O)
REMARK
FM TRANS function (1:W, 0:W/O)
FM TRANS FREQUENCY (1:HIGH, 0:LOW)
NTSC function (1:W, 0:W/O)
AV ST MODE (1:PSEUDO, 0:MATRIX)
SYNC KILL function (1:W, 0:W/O)
MONO FILTER (50MHz/ 75Hz)
MONO FILTER (100Hz/ 200KHz)
WOOFER function (1:W, 0:W/O)
REMARK
0:CHINA / 1:INDONESIA / 2: THAI / 3: VIETNAM / 4MULTI
0:MONO / 1:AV ST / 2:REAL ST
0:NO AV / 1:AV1 / 2:AV1,2 / 3:AV1,2,3
0:4KEY / 1:6KEY / 2:8KEY
COLOR TABLE
PLL DATA (NTSC Tuning Level)
REMARK
FM PRESCALER
NICAM PRESCALER
SCART PRESCALER
A2 PRESCALER
MONO THRESHOLD
A2 THRESHOLD
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 11
- 11 -
<TABLE 4> SECAM MODEL 1 PAL <TABLE 5> SECAM MODEL 1 CIS
OPTION 1
DVD
TURBO ME
V-CURVE
V-MUTE
EYE
FLAT
SND MUTE
GAME
OPTION2
TURBO
ARC
200PR
BLUEBACK
TURBO AT
SHARP
DVDN 6P
OPTION3
FM TRANS
NTSC
AV PSEU
SYNC KI
A2 SW
LNA
SWOOFER
OPTION 4
SYSTEM
SND MODE
AV
LOC KEY
COLOR T
PLL DIV
OPTION 5
FM PRE
NICAM PRE
SCART PRE
A2 FM TH
FIRST TH
ZWT TH
INITIAL
0
0
1
1
0
1
1
0
0
1
0
0
1
0
0
0
0
1
1
1
0
0
1
0
1
1
1
31
6
13
0
5
15
2
REMARK
DVD function (1:W, 0:W/O)
T-P,T-S FUNCTION DISPLAY on MENU
VOLUME CURVE (1:HIGH, 0:LOW)
VIDEO MUTE
EYE function (1:W, 0:W/O)
CPT
SOUND MUTE at no signal (yes or not)
GAME function (1:W, 0:W/O)
REMARK
TURBO P/S function (1:W, 0:W/O)
ARC function (1:W, 0:W/O)
200CH. MEMORY
BLUEBACK display (1:W, 0:W/O)
TURBO SEARCH function (1:W, 0:W/O)
SHARPNESS DATA (1:+10, 0:NORMAL)
DVD 6P (1:W, 0:W/O)
REMARK
FM TRANS function (1:W, 0:W/O)
NTSC function (1:W, 0:W/O)
AV ST MODE (1:PSEUDO, 0:MATRIX)
SYNC KILL function (1:W, 0:W/O)
MONO DUAL function (1:5.74MHz possible, 0:NORMAL)
LNA TUNER (1:LNA, 0:NORMAL)
WOOFER function (1:W, 0:W/O)
REMARK
0:ENG / 1:ARAB / 2:PARSI
0:MONO / 1:AV ST
0:NO AV / 1:AV1 / 2:AV1,2
0:4KEY / 1:6KEY / 2:8KEY
COLOR TABLE
PLL DATA (NTSC Tuning Level)
REMARK
FM PRESCALER
NICAM PRESCALER
SCART PRESCALER
A2 PRESCALER
MONO THRESHOLD
A2 THRESHOLD
OPTION 1
DVD
TURBO ME
V-CURVE
V-MUTE
EYE
FLAT
SND MUTE
GAME
OPTION2
TURBO
ARC
200PR
BLUEBACK
TURBO AT
SHARP
DVDN 6P
OPTION3
FM TRANS
NTSC
AV PSEU
SYNC KI
A2 SW
LNA
SWOOFER
OPTION 4
SYSTEM
SND MODE
AV
LOC KEY
COLOR T
PLL DIV
OPTION 5
FM PRE
NICAM PRE
SCART PRE
A2 FM TH
FIRST TH
ZWT TH
INITIAL
0
0
1
1
0
1
1
0
0
1
0
0
1
0
0
0
0
1
1
1
0
0
1
0
1
1
1
31
6
13
0
5
15
2
REMARK
DVD function (1:W, 0:W/O)
T-P,T-S FUNCTION DISPLAY on MENU
VOLUME CURVE (1:HIGH, 0:LOW)
VIDEO MUTE
EYE function (1:W, 0:W/O)
CPT
SOUND MUTE at no signal
GAME function (1:W, 0:W/O)
REMARK
TURBO P/S function (1:W, 0:W/O)
ARC function (1:W, 0:W/O)
200CH. MEMORY
BLUEBACK display (1:W, 0:W/O)
TURBO SEARCH function (1:W, 0:W/O)
SHARPNESS DATA (1:+10, 0:NORMAL)
DVD 6P (1:W, 0:W/O)
REMARK
FM TRANS function (1:W, 0:W/O)
NTSC function (1:W, 0:W/O)
AV ST MODE (1:PSEUDO, 0:MATRIX)
SYNC KILL function (1:W, 0:W/O)
MONO DUAL function (1:5.74MHz possible, 0:NORMAL)
LNA TUNER (1:LNA, 0:NORMAL)
WOOFER function (1:W, 0:W/O)
REMARK
0:CIS / 1:HUNGAR / 2:CHESKY/ 3:RUMANI/ 4:MULTI
0:MONO / 1:AV ST
0:NO AV / 1:AV1 / 2:AV1,2
0:4KEY / 1:6KEY / 2:8KEY
COLOR TABLE
PLL DATA (NTSC Tuning Level)
REMARK
FM PRESCALER
NICAM PRESCALER
SCART PRESCALER
A2 PRESCALER
MONO THRESHOLD
A2 THRESHOLD
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 12
Menu
VP 0
VP 1
VP 2
VP 3
VP 4
VP 5
VP 6
VP 7
VP 8
VP 9
VP 10
VP 11
VP 12
VP 13
VP 14
VP 15
VP 16
VP 17
VP 18
VP 19
VP 20
VP 21
VP 22
VP 23
VP 24
VP 25
VP 26
VP 27
VP 28
VP 29
VP 30
VP 31
VP 32
VP 33
VP 34
VP 35
VP 36
VP 37
VP 38
VP 39
VP 40
VP 41
VP 42
VP 43
VP 44
VP 45
VP 46
VP 47
VP 48
VP 49
VP 50
VP 51
VP52
VP53
OSD
RF AGC
H POS
V POS
V SIZE
R BIAS
G BIAS
B BIAS
R DRIVE
G DRIVE
B DRIVE
V LIN
V SCORR
V COMP
H BLK L
H BLK R
AFC GAIN
H FREQ
CD MODE
VBLK SW
FBP SW
YC FILTER
Y APF
C SYSTEM
C VCO
PAL APC
S TRAP SW
VIF SYS
VCO FREQ
SIF SYS
SUB BIAS
BRIGHT
ABL
BRI STOP
ABL TH
RGB TEMP
COR GAIN
PRE SHOOT
OVER SHOOT
Y GAMMA
DC REST
B-ST START
B-ST GAIN
C BYPASS
C KILL ON
C KILL OFF
C KILL OPER
RB BAL
RB ANG
B-Y LEVEL
R-Y LEVEL
V LEVEL
OVER MO SW
OVER MO LE
TINT TH
Adjustment
RF AGC Delay
H PHASE
V Shift (V POSI)
Vertical Size
Red Bias
Green Bias
Blue Bias
Red Drive
Green Drive
Blue Drive
V LIN (Vertical Linearity)
Vertical S-Correction
V.COMP
H BLK L
H BLK R
AFC Gain & gate
H Freq.
Count Down Mode
VBLK SW
FBP Blanking OR SW
Filter System
Y APF Select
Color System
C/VCO Adjustment
PAL APC SW
S.TRAP SW
VIF System SW
VCO Freq
SIF System SW
Sub Bias (sub-bright)
Brightness Control
Bright ABL Defeat
Bright Mid Stop Defeat
Bright ABL Threshold
RGB Temp SW
Coring Gain Select
Pre-shoot Adjustment
Over-shoot Adjustment
Y Gamma start point Select
DC Restoration Select
Black Stretch Start Point Select
Black Stretch Gain Select
C Bypass
C Kill On
C Kill Off
Color Killer Operational Point
R/B Gain Balance
R/B Angle
B-Y DC Level
R-Y DC Level
Video Level
OVER.MOD.SW
OVER.MOD.LEVEL
Tint Through
Range
0 ~ 63
0 ~ 31
0 ~ 15
0 ~ 127
0 ~ 255
0 ~ 255
0 ~ 255
0 ~ 127
0 ~ 15
0 ~ 127
0 ~ 31
0 ~ 31
0 ~ 3
0 ~ 3
0 ~ 3
0 / 1
0 ~ 63
0 ~ 7
0 / 1
0 / 1
0 ~ 15
0 / 1
0 ~ 7
0 ~ 7
0 / 1
0 / 1
0 ~ 3
0 ~63
0 ~ 3
0 ~ 127
0 ~ 127
0 / 1
0 / 1
0 ~ 7
0 / 1
0 ~ 3
0 ~ 3
0 ~ 3
0 ~ 3
0 ~ 3
0 ~ 3
0 ~ 3
0 / 1
0 / 1
0 / 1
0 ~ 7
0 ~ 15
0 ~ 15
0 ~ 15
0 ~ 15
0 ~ 7
0 / 1
0 ~ 15
0 / 1
Initial(PAL)
40
12
5
80
127
127
127
64
8
64
23
10
3
0
3
0
15
0
0
1
2
0
0
4
0
1
1
28
1
45
64
1
0
4
0
3
0
3
0
1
1
2
0
0
0
7
5
5
10
11
7
0
8
0
Initial(SECAM)
40
12
5
105
127
127
127
64
8
64
23
10
7
0
3
0
15
0
0
1
2
0
0
4
0
1
1
112
1
45
64
1
0
4
0
3
0
3
0
1
1
2
1
0
0
7
10
8
28
27
6
0
8
0
Remark
Necessary
Necessary
Necessary
Necessary
Necessary
Unnecessary
Necessary
Necessary
Unnecessary
Necessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
- 12 -
<TABLE 1>
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 13
- 13 -
Menu
VP 54
VP 55
VP 56
VP 57
VP 58
VP 59
VP 60
VP 61
VP 62
VP 63
VP 64
VP 65
VP 66
VP 67
VP 68
VP 69
VP 70
VP 71
VP 72
VP 73
VP 74
VP 75
VP 76
VP 77
VP 78
VP 79
VP 80
VP 81
VP 82
VP 83
VP 84
VP 85
OSD
Y TH
Y GAIN
R WIDTH
R OFFSET
B WIDTH
B OFFSET
T DISABLE
V TRANCE
A MUTE
V MUTE
SYNC KILL
V KILL
FSC SW
GRAY
CROSS BW
H-TONE
RGB BLK
C EXT
CRCB IN
AUDIO SW
VOL FIL
FM MUTE
IF AGC
A-OUT SW
DE-EMPH
FM GAIN
VOLUME
S TRAP
C TRAP
FLESH
OSD CONT
OSD POS
Adjustment
Y TH
Y Gain
R width
R offset
B width
B offset
T Disable
V TRANCE
Audio Mute
Video Mute
Sync Kill
Vertical Kill
SVO or fsc Output
Gray Mode
Cross B/W
Half Tone
Blank Defeat
C Ext
CbCr IN
Audio SW
VOL. FIL
FM Mute
IF AGC Defeat
A.MONI.SW
De-emphasis TC
FM Gain
VOLUME
S Trap Test
C. Trap Test
Auto-Flesh
OSD Contrast
OSD Position
Range
0 ~ 3
0 ~ 3
0 ~ 3
0 ~ 3
0 ~ 3
0 ~ 3
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 ~ 3
0 ~ 3
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 ~ 127
0 ~7
0 ~ 7
0 / 1
0 ~ 3
-
Initial(PAL)
1
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
126
4
4
0
0
38
Initial(SECAM))
1
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
PAL/CIS1
126
Remark
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Refer to <table 1-1>
Menu
VP 81
VP 82
VP 83
VP 84
VP 85
VP 86
VP 87
VP 88
VP 89
VP 90
VP 91
VP 92
VP 93
VP 94
VP 95
Adjustment
V D C
V SEP UP
V RES TM
HLLDET
ERGBL OUT
S TRAP
C TRAP
DIG OSD
V MAUD SW
V INRGB SW
FLESH
WPLO [E
VM GAIN
SYNC SS
GY AMP
Initial
32
0
0
1
8
4
4
0
0
1
0
0
0
3
4
Remark
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Menu
VP 96
VP 97
VP 98
VP 99
VP 100
VP 101
VP 102
VP 103
VP 104
VP 105
VP 106
VP 107
VP 108
VP 109
Adjustment
HTNOC
OVER MT
APC OFF
VL OFFS
A2SW
VCO AD
EQU AD
BEL AD
EQU ON
BA SW
SECK OFF
SECK ON
OSD CONT
OS POS
Initial
0
0
4
3
0
8
8
3
0
1
0
0
0
38
Remark
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
Unnecessary
<TABLE 1-1> SECAM MODEL (DATA 81 ~ 109)
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 14
- 14 -
12. Inspection Item
12-1. Multiplex Sound Adjustment
1) Received 06CH factory signal. Check if the OSD displays
“ST.” for Stereo Broadcasting.
2) Press sound multiplex(MPX) button for stereo sound
separation. Check if the “L” channel produce 1kHz output.
3) Received 02CH factory signal. Check if the OSD displays
“SAP” for Secondary Audio Program Broadcasting.
12-2. External Input(A/V IN)
1) Connect through 75 ohm A/V input terminal standard
picture signal. The standard video input level is 1Vp-p.
2) Connect to input terminal sound signal strength of 1kHz
400mVrms(1.13Vp-p) and compare status.
3) Check picture status by if it is in good condition by
pressing the TV/AV IN key on the remote control and
compare standard input condition of the receiver.
4) Check speaker output status if it is in good condition and
check input terminal against receiver ground by
connecting “R” channel of RCA JACK.
12-3. Signal, Sound Adjustment Condition
(1) Necessary parts and instrument
- Adjustment remote control(with signal, sound check button)
* LG standard, DATA CODE FC(h) FD(h)
(2) Checking
1) Received US30CH standard signal.
2) Check CONTRAST, BRIGHTNESS, COLOR, TINT,
SHARPNESS by pressing the Signal Check button
continuously.
3) Received US06CH.
4) Check STEREO function by pressing Sound Check button.
13. TV/CABLE TV Channel operation
condition
(1) Necessary parts and instruments
- Remote controller (with AIR/CABLE TV button)
(2) Checking
- Check receiver channel operation for some abnormality by
pressing AIR/CABLE TV button continuously.
13-1. HOLD DOWN CHECK (X-RAY Protect)
- This X-RAY Protect testing is applicable only for model with
HOLD DOWN circuit only.
(1) Checking
1) Check HOLD DOWN circuit operation by shorting R419.
2) At this time, the receiver turns to POWER OFF and goes
to STAND-BY condition. Accordingly, the high voltage
does not occurred and you can perform HOLD DOWN
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 15
- 15 -
PRINTED CIRCUIT BOARD
MAIN
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 16
- 16 -
SIDE A/V
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 17
- 17 -
Maneuver defectiveness
Maneuver defectiveness
In case of influx NOISE
- R/C is not operate
Maneuver defectiveness
1. TV FUNCTIONAL
2. TU / IF SECTION
3. VIDEO PROCESSING
TROUBLE SHOOTING
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 18
- 18 -
4. SMPS PRIMARY SECTION
5. SMPS SECONDARY SECTION
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 19
- 19 -
6. VERTICAL SECTION
7. HORIZONTAL SECTION
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 20
8. SOUND PROCESSING SECTION
- 20 -
9. CPT DRIVE SECTION
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 21
- 21 -
BLOCK DIAGRAM
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 22
- 22 -
EXPLODED VIEW
300
310
330
121
120
600
112
174
520
400
943
913
170
150
320
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 23
- 23 -
EXPLODED VIEW PARTS LIST
The components identified by mark is
critical for safety.
Replace only with part number specified.
LOCA. NO PARTS No. DESCRIPTIONS
112 EAK35070301/03 CPT,ITC A51QGT420X 08 21INCH Ultra Slim
EAK35070304/07/28/29 CPT,ITC A51QGT420X 08 P02G 21INCH Ultra Slim
EAK39334401/07 CPT,ITC A51QGT420X 31 L 21INCH Ultra
120 EAB30820601 Speaker,Full Range JF 20 FERRITE 5W 8OHM 82DB 200HZ
121 4810900054A Bracket, MOLD PP SPEAKER 21FC1 MC049B PP LGE
150 6140VC2007W Coil,Degaussing FOR ULTRA SLIM 11OHM AL 45T 0.6mM
170 6858V21001A Drawing,Assembly EARTH SPRING 21INCH 64T RT-21FDRX
174 6410VEH001B/E Power Cord Assembly,CE-503/H03VVH2-F 2X0.75MM2/2.4M/BLK
174-225C Power Cord Assembly,TJC1 TJC1-2Y 2.0M 220MM 250V
300 ACQ32599401/04/05/06 Cover Assembly,21FS7RG-ZS MC-059C 21" LGESY TOOL
310 MBG36628001 Button,Control, MOLD ABS 380 6 KEY ABS-380 21FS7RG
320 320-062H Spring, CUTTING STSC304 COIL STSC304
330 MBG36628801 Button,Power, MOLD ABS HF-380 21FS7RG-TS ABS HF38
400 ACQ32599502/03/04/05 Cover Assembly,21FS7RK-LS MC-059C 21" LGESY TOOL
520 EBR36751114/20/23 PCB Assembly,MAIN M.I MC059C 21FS7RG-TS NDKLCDA
EBR35123051/52/55/66 PCB Assembly,MAIN M.I MC059C 21FS7RGG-TS
EBR35123048/50/73/77 PCB Assembly,MAIN M.I MC059C 21FS7RG-TS QLVLCBK
EBR35123080/84/87/90 PCB Assembly,MAIN M.I MC059C - 21FS7RG-TS.KMILCTY ULTRA Slim
EBR35123097 PCB Assembly, MAIN M.I MC059C - 21FS7RE-TS
EBR30621939/51 PCB Assembly, MAIN1 M.I MC059C 21FS7RG-TS
600 EBR35135301/02 PCB Assembly,SUB M.I MC059C 21FS6 ULTRA SLIM
EBR35135305/06/07 PCB Assembly,SUB M.I MC059C 21FS7 ULTRA SLIM
EBR37018502/03 PCB Assembly, SUB M.I MC059C 21FS7 SIDE AV
913 FAB30021402 Screw Assembly, FAB30021402 TAPTITE P TYPE D5.0 L35
943 FAB30006309 Screw,Taptite, 1SZZ9PB012A TH + P 4MM 16MM MSWR10
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 24
- 24 -
REPLACEMENT PARTS LIST
LOCA. NO PART NO DESCRIPTION
D815
D824
D826
D902
D903
DB801
ZD102
ZD103
ZD412
ZD801
ZD804
ZD851
C103
C104
C105
C107
C108
C109
C11
C110
C111
C115
C116
C12
C1203
C1205
C130
C131
C132
C14
C15
C16
C17
C19
C210
C211
C212
C215
C222
C225
C226
C232
C233
C234
C235
C242
C243
0DRDC00014A
0DRTW00141A
0DRDC00014G
0DS141489AB
0DRDC00014R
0DRTW00131C
0DZ510009BE
0DZ300009AG
0DZ910009BD
EAH35180401
0DZ510009BE
EAH35180401
0CE106DK618
0CN1030F679
0CN1030F679
0CN1020K519
0CE337DD618
0CE225DK618
0CC1800K415
0CE225DK618
0CE476DF618
0LA0680K119
0CN1030F679
0CC1800K415
0CN2220F569
0CN2220F569
0CN1010K519
0CN1010K519
0CE107DF618
0CE227DD618
0CE334DK618
0CE225DK618
0CQ3331N509
0CN1030F679
181-007C
181-007C
181-007H
0CN4710K519
0CN4710K519
0CN5620F569
0CN5620F569
0RD2203F609
0CN6820F569
0CN6820F569
0RD2203F609
0CE475DK618
0CE475DK618
TVR06J 600V 1300MV 10UA 25A 150NSEC D
SFAF504G 200V 975MV 10UA 125A 35NSEC
RU4AM 600V 1.3V 10UA 70A 100NSEC
1N4148 1V 100V 150MA 500MA 4NSEC
1n4003 300V 1.1V 10UA 30A 1.5USEC DO4
TS6P05G 600V 1V 5UA 150A TS6P ST 4P 4
GDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MW D
GDZJ30B 30V 27.7TO29.13V 55OHM 500MW
GDZJ9.1B . 9.1V 8.57TO9.01V 25OHM 500
gdzj6.2b 6.2V 5.96TO6.27V 60OHM 500MW
GDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MW D
gdzj6.2b 6.2V 5.96TO6.27V 60OHM 500MW
SMS5.0TP50VB10M 10uF 20% 50V 72MA
RH EP050 Y103M-B-B 10nF 20% 16V X5R
RH EP050 Y103M-B-B 10nF 20% 16V X5R
RH UP050 B102K-B-B 1000pF 10% 50V Y5P
SMS5.0TP10VB330M 330uF 20% 10V 386MA
EGR225M050T1G1C11G 2.2uF 20% 50V
DD1HCH180J749 18pF 5% 50V C0H -25TO
EGR225M050T1G1C11G 2.2uF 20% 50V
SMS5.0TP16VB47M 47uF 20% 16V 0A -40TO
LAL02TBR68K 680NH 10% - 310MA
RH EP050 Y103M-B-B 10nF 20% 16V X5R
DD1HCH180J749 18pF 5% 50V C0H -25TO
RH EP050 X222K-B-B 2.2nF 10% 16V X7R
RH EP050 X222K-B-B 2.2nF 10% 16V X7R
RH UP050 B101K-B-B 100pF 10% 50V Y5P
RH UP050 B101K-B-B 100pF 10% 50V Y5P
EGR107M016T1G1C11G 100uF 20% 16V
EGR227M010T1G1E11G 220uF 20% 10V
EGR334M050T1G1C11G 330nF 20% 50V
EGR225M050T1G1C11G 2.2uF 20% 50V
PEI333K2AT 0.033uF 10% 100V PE -40TO
RH EP050 Y103M-B-B 10nF 20% 16V X5R
ECQV1H104JL3 100nF 5% 50V MPE
ECQV1H104JL3 100nF 5% 50V MPE
ECQV1H474JL3 470nF 5% 50V MPE
RH UP050 B471K-B-B 470pF 10% 50V Y5P
RH UP050 B471K-B-B 470pF 10% 50V Y5P
RH EP050 X562K-B-B 5.6nF 10% 16V X7R
RH EP050 X562K-B-B 5.6nF 10% 16V X7R
RD-96T1J220K 220KOHM 5% 1/6W 3.2X1.8M
CH EP050 X682K-B-B Z 6.8nF 10% 16V X7
CH EP050 X682K-B-B Z 6.8nF 10% 16V X7
RD-96T1J220K 220KOHM 5% 1/6W 3.2X1.8M
EGR475M050T1G1C11G 4.7uF 20% 50V
EGR475M050T1G1C11G 4.7uF 20% 50V
LOCA. NO PART NO DESCRIPTION
IC02
IC301
IC401
IC501
IC601
IC701
IC751
IC801
IC802
IC803
IC804
IC805
Q10
Q101
Q102
Q111
Q16
Q241
Q301
Q401
Q402
Q403
Q801
Q813
Q901
Q902
Q903
D111
D301
D302
D303
D403
D405
D406
D407
D408
D411
D505
D601
D801
D802
D803
D813
0IAL241610B
0IPRP00741A
0ISG814500A
EAN36193601
0IPMGSA024B
0IPRPSA017A
0IPRPSA018A
0IPMGSK016B
0IPRPKD003A
0IKE780500Q
0IMCRKE002B
0ISK110000A
0TR319809AA
0TR319709AB
0TR319809AA
0TR102009AB
0TR319809AA
0TR126609AA
0TR103009AD
0TR322809AA
0TRSA10001C
0TR421009CA
0TR319809AA
0TR102009AB
0TR233009CA
0TR233009CA
0TR233009CA
0DSVH00019A
0DRDC00014A
0DRDC00014C
0DS141489AB
0DS141489AB
0DS141489AB
EAH30754301
0DRDC00014G
0DRDC00014D
0DS141489AB
0DRDC00014A
0DS141489AB
0DRDC00014Q
0DRDC00014J
0DRDC00014J
0DRDC00014F
AT24C16A-10PU-2.7 16KBIT 2KX8BIT 2.7V
STV9326 10TO30V 50mA 50to60Hz
TDA8145 17VTO30V 0HZ 500MW 0F DIP ST
LG048N9R58R5-E 4.5VTO5.5V,2VTO5.5V 4
LA42072NLG-E 5.5TO20V 0.5V - 7W 15W
LV1116N-E 0 0W DIP ST 36P SANYO
LA7958N-E 8.0TO12.0V 0SEC 0SEC 300MW
STR-W6754 16.3TO19.9V 8.8TO10.6V SWIT
PC17L1(5V/35V 4P) 5V 35V 35V 50MA 100
KIA7805API 7TO20V 5V 2W TO220IS ST 3P
KIA78R09API 10TO25V 9V 1.5W TO220IS S
SE110N(LF12) 150V 0 0 0W 0W 0 1 TO220
KTC3198(KTC1815) NPN 5V 60V 50V 150MA
KTC3197 NPN 4V 30V 25V 50MA 100NA 20T
KTC3198(KTC1815) NPN 5V 60V 50V 150MA
KRC102M(KRC1202) NPN 30V 10V 50V
KTC3198(KTC1815) NPN 5V 60V 50V 150MA
KTA1266-Y(KTA1015) PNP -5V -50V -50V
KRC103M NPN 40V 0V 50V 100MA 500NA 70
KTC3228-O(KTC2383) NPN 6V 160V 160V
2SD2689LS NPN 5V 1.5KV 700V 10A 10UA
BF421(Philips) PNP -5V -0.3KV -0.3KV
KTC3198(KTC1815) NPN 5V 60V 50V 150MA
KRC102M(KRC1202) NPN 30V 10V 50V
KSC2330Y NPN 7V 300V 300V 100MA 100NA
KSC2330Y NPN 7V 300V 300V 100MA 100NA
KSC2330Y NPN 7V 300V 300V 100MA 100NA
BA282 1V 35V 100MA 350A 1SEC 350W DO3
TVR06J 600V 1300MV 10UA 25A 150NSEC D
1N4005GP 600V 1.1V 5UA 30A 0SEC DO41
1N4148 1V 100V 150MA 500MA 4NSEC
1N4148 1V 100V 150MA 500MA 4NSEC
1N4148 1V 100V 150MA 500MA 4NSEC
RU4DS 1.8V 1.3KV 1.5A 50A 400NSEC 0W
RU4AM 600V 1.3V 10UA 70A 100NSEC
RGP15J 600V 1300MV 5UA 50A 250NSEC
1N4148 1V 100V 150MA 500MA 4NSEC
TVR06J 600V 1300MV 10UA 25A 150NSEC
1N4148 1V 100V 150MA 500MA 4NSEC
EU1ZS 200V 2.5V 10UA 15A 120NSEC DO41
EU1Z 200V 2.5V 10UA 15A 50NSEC DO41 T
EU1Z 200V 2.5V 10UA 15A 50NSEC DO41 T
RU3AM 600V 1100MV 10UA 50A 90NSEC
IC
For Capacitor & Resistors, the
charactors at 2nd and 3rd digit
in the P/No. means as follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
TRANSISTOR
DIODE
CAPACITOR
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 25
- 25 -
LOCA. NO PART NO DESCRIPTION
C246
C28
C30
C301
C303
C305
C306
C307
C308
C309
C310
C311
C312
C313
C314
C322
C40
C401
C402
C404
C406
C407
C408
C409
C412
C414
C415
C417
C420
C421
C432
C434
C435
C50
C501
C502
C503
C504
C505
C506
C507
C509
C51
C510
C511
C512
C513
C514
C515
C516
C517
C518
0CE227DD618
0CE107DD618
0CN1030F679
0CQ3921N409
0CK4710W515
0CQ6831N509
0CQ4731N509
0CE107BJ618
0CE476BF618
0CE108DJ618
181-007F
0CE228BH61A
0CE684EK638
0CE106DK618
0CQ1041N509
0CN1030F679
0CE107DD618
0CF4732Y460
181-013N
0CK4710W515
0CF2731Y460
0CE106DH618
0CE225CP618
0CE107DD618
181-013P
0CF15312460
0CE475DK618
181-091U
0CE105BR618
181-091L
0CQ6821N509
0CQ4731N509
0CE477EK618
0CN2210K519
0CX3300K409
0CN2230H949
0CX3300K409
0CE105DK618
0CN1010K519
0CN1030F679
0CN1520F569
0CE475CK638
0CN2210K519
0CN1030F679
0CE107DD618
0CF4741L438
181-007F
181-009R
0CE227DD618
0CQ1531N509
0CE335DK618
0CE107DD618
EGR227M010T1G1E11G 220uF 20% 10V
SMS5.0TP10VB100M 100uF 20% 10V 157MA
RH EP050 Y103M-B-B 10nF 20% 16V X5R 310M 2A 392 J 3.9nF 5% 100V PE -40TO+
DCM471K20Y5PL6FJ5A 470pF 10% 500V
PEI683K2AT 68nF 10% 100V PE -40TO+85C
PEI473K2AT 47nF 10% 100V PE -40TO+85C
ESM107M035T6G5G11G 100uF 20% 35V
ESM476M016T1G5C11G 47uF 20% 16V
EGR108M035T1G1L25G 1000uF 20% 35V
ECQ-V1H224JL3(TR) 220nF 5% 50V MPE -4
ESM228M025T1G5M26G 2200uF 20% 25V
KMG5.0PP50V0.68UFN(5X11) 0.00000068F
SMS5.0TP50VB10M 10uF 20% 50V 72MA -40
PEI104K2AT 0.1uF 10% 100V PE -40TO+85
RH EP050 Y103M-B-B 10nF 20% 16V X5R SMS5.0TP10VB100M 100uF 20% 10V 157MA
0.047UF 5% 630V MPP -45TO+85C NON-IND
MPP274J2GD 270nF 5% 400V MPP DCM471K20Y5PL6FJ5A 470pF 10% 500V
PCMP389 62273 0.027uF 5% 630V MPP -40
SMS5.0TP25VB10M 10uF 20% 25V 72MA -40
SHL5.0TP160VB2.2M 2.2uF 20% 160V 38MA
SMS5.0TP10VB100M 100uF 20% 10V 157MA
MPP334J2GD 330nF 5% 400V MPP PCMP384 92153 0.015uF 5% 2000V MPP -4
EGR475M050T1G1C11G 4.7uF 20% 50V
DG3DHR221K825 220pF 10% 2000V Y5R -25
ESM105M250T1G5E11G 1uF 20% 250V
DEHR33A222KN3A 2.2nF 10% 1000V Y5R -2
PEI682K2AT 6.8nF 10% 100V PE -40TO+85
PEI473K2AT 47nF 10% 100V PE -40TO+85C
KMG5.0TP50VB470M 470uF 20% 50V 690MA
RH UP050 B221K-B-B 220p 10% 50V Y5P RH UP050SL330J-B-B 33pF 5% 50V S2L -2
RH TP050 F223Z-B-B 22000p -20TO+80% 2
RH UP050SL330J-B-B 33pF 5% 50V S2L -2
EGR105M050T1G1C11G 1uF 20% 50V 10MA
RH UP050 B101K-B-B 100pF 10% 50V Y5P
RH EP050 Y103M-B-B 10nF 20% 16V X5R
RH EP050 X152K-B-B 1500pF 10% 16V X7R
SHL5.0TP50VB4.7M 4.7uF 20% 50V 48MA
RH UP050 B221K-B-B 220p 10% 50V Y5P
RH EP050 Y103M-B-B 10nF 20% 16V X5R
SMS5.0TP10VB100M 100uF 20% 10V 157MA
PCMT 365 76474 0.47uF 5% 63V MPE -40T
ECQ-V1H224JL3(TR) 220nF 5% 50V MPE
PPN223K2DH 22nF 10% 200V PP 40TO+85C
EGR227M010T1G1E11G 220uF 20% 10V
PEI153K2AT 0.015uF 10% 100V PE -40TO+
SMS5.0TP50VB3.3M 3.3uF 20% 50V 42MA SMS5.0TP10VB100M 100uF 20% 10V 157MA
LOCA. NO PART NO DESCRIPTION
C519
C521
C522
C523
C524
C526
C527
C528
C529
C530
C531
C532
C533
C534
C535
C537
C539
C540
C542
C543
C548
C56
C602
C603
C604
C606
C608
C609
C610
C611
C612
C613
C614
C627
C674
C701
C702
C704
C705
C706
C707
C708
C709
C710
C711
C713
C714
C715
C716
C717
C719
C720
0CN1030F679
0CE107DD618
0CN2220F569
0CE477DD618
0CE474DK618
0CE107DD618
181-007G
0CN1030F679
0CE105DK618
0CE225DK618
0CE474DK618
0CN1040K949
0CQ4731N509
0CN1030F679
0CN1030F679
0CN1010K519
0CN1010K519
0CE475DR618
0CQ1831N509
0CQ2231N509
0CN8200K519
0CN4710K519
0CE337DH618
0CE475DK618
0CQ6821N509
181-007C
0CE106DF618
0CQ6821N509
0CE475DK618
0CE476DH618
181-007C
181-007C
181-007C
0CK1030K945
0RD6801F609
0CE475CK636
181-064P
181-064P
0CE475DK618
0CN5620F569
0CQ5621N509
0CN1020K519
181-007C
181-007C
0CE105CK638
0CE105CK638
0CE475DK618
0CE107DF618
0CE475DK618
181-007C
0CE105CK638
181-007C
RH EP050 Y103M-B-B 10nF 20% 16V X5R SMS5.0TP10VB100M 100uF 20% 10V 157MA
RH EP050 X222K-B-B 2.2nF 10% 16V X7R
EGR477M010T6G1G11G 470uF 20% 10V
EGR474M050T1G1C11G 470nF 20% 50V
SMS5.0TP10VB100M 100uF 20% 10V 157MA
ECQV1H334JL3 330nF 5% 50V MPE RH EP050 Y103M-B-B 10nF 20% 16V X5R EGR105M050T1G1C11G 1uF 20% 50V 10MA
EGR225M050T1G1C11G 2.2uF 20% 50V
EGR474M050T1G1C11G 470nF 20% 50V
CH UP050 F104Z-B-B Z 100000pF -20TO+8
PEI473K2AT 47nF 10% 100V PE -40TO+85C
RH EP050 Y103M-B-B 10nF 20% 16V X5R
RH EP050 Y103M-B-B 10nF 20% 16V X5R
RH UP050 B101K-B-B 100pF 10% 50V Y5P
RH UP050 B101K-B-B 100pF 10% 50V Y5P
EGR475M250T1G1G11G 4.7uF 20% 250V
PEI183K2AT 0.018uF 10% 100V PE -40TO
PEI223K2AT 0.022u 10% 100V PE -40TO+8
RH UP050 B820K-B-B 82pF 10% 50V Y5P
RH UP050 B471K-B-B 470pF 10% 50V Y5P
EGR337M025T1G1G14G 330uF 20% 25V
EGR475M050T1G1C11G 4.7uF 20% 50V
PEI682K2AT 6.8nF 10% 100V PE -40TO+85
ECQV1H104JL3 100nF 5% 50V MPE SMS5. 0TP16VB10M 10uF 20% 16V 72MA -4
PEI682K2AT 6.8nF 10% 100V PE -40TO+85
EGR475M050T1G1C11G 4.7uF 20% 50V
SMS5.0TP25VB47M 47u 20% 25V 131MA -40
ECQV1H104JL3 100nF 5% 50V MPE ECQV1H104JL3 100nF 5% 50V MPE ECQV1H104JL3 100nF 5% 50V MPE DCT103Z26Y5VF6FJ5A 10000pF -20TO+80%
RD-96T1J6K80 6.8KOHM 5% 1/6W 3.2X1.8M
ERN475M050T1G5C11G 4.7uF 20% 50V
ERN106T016T1G5C11G 10uF -10TO+50%
ERN106T016T1G5C11G 10uF -10TO+50%
EGR475M050T1G1C11G 4.7uF 20% 50V
RH EP050 X562K-B-B 5.6nF 10% 16V X7R
PEI562K2AT 5.6nF 10% 100V PE -40TO+85
RH UP050 B102K-B-B 1000pF 10% 50V Y5P
ECQV1H104JL3 100nF 5% 50V MPE
ECQV1H104JL3 100nF 5% 50V MPE
SHL5.0TP50VB1M 1uF 20% 50V 22MA -40TO
SHL5.0TP50VB1M 1uF 20% 50V 22MA -40TO
EGR475M050T1G1C11G 4.7uF 20% 50V
EGR107M016T1G1C11G 100uF 20% 16V
EGR475M050T1G1C11G 4.7uF 20% 50V
ECQV1H104JL3 100nF 5% 50V MPE
SHL5.0TP50VB1M 1uF 20% 50V 22MA -40TO
ECQV1H104JL3 100nF 5% 50V MPE
For Capacitor & Resistors,
the charactors at 2nd and 3rd
digit in the P/No. means as
follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 26
- 26 -
LOCA. NO PART NO DESCRIPTION
C721
C722
C723
C724
C725
C726
C727
C729
C730
C731
C732
C756
C757
C758
C760
C761
C763
C764
C765
C766
C767
C802
C803
C804
C805
C809
C810
C811
C813
C814
C815
C817
C818
C819
C821
C826
C833
C834
C835
C843
C850
C853
C855
C901
C902
C904
C907
C908
L102
L1202
181-007C
0CN1020K519
0CQ1032K439
0CQ6831N509
0CE475DK618
0CN1010K519
0CN1010K519
0CE475CK636
0CE475DK618
0CN1010K519
0CN1010K519
0CE106DF618
0CE105DK618
0CE105DK618
0CE105DK618
0CE105DK618
0CE106DF618
0CN1030F679
0CE106DF618
0CE107DF618
0CN1030F679
0CQZVBK002D
0CE337KV6A0
0CK10202515
0CK10202515
0CE105BK618
0CE336BK618
181-011B
181-091Q
0CE227DP61A
0CK8210K515
181-007C
181-007A
0CK1520K515
0CK4710W515
0CE228BF618
0CE107DD618
0CE228DH610
0CE107CP618
181-120K
0CE477BF618
0CE107DD618
0CN1030F679
0CE475DR618
0CN2210K519
0CN1810K519
0CN2210K519
0CK12202510
0LA0820K119
0LA1000K119
ECQV1H104JL3 100nF 5% 50V MPE
RH UP050 B102K-B-B 1000pF 10% 50V Y5P
DMF 1H 103J TP 10nF 5% 50V MPE -40TO+
PEI683K2AT 68nF 10% 100V PE -40TO+85C
EGR475M050T1G1C11G 4.7uF 20% 50V
RH UP050 B101K-B-B 100pF 10% 50V Y5P
RH UP050 B101K-B-B 100pF 10% 50V Y5P
ERN475M050T1G5C11G 4.7uF 20% 50V
EGR475M050T1G1C11G 4.7uF 20% 50V
RH UP050 B101K-B-B 100pF 10% 50V Y5P
RH UP050 B101K-B-B 100pF 10% 50V Y5P
SMS5. 0TP16VB10M 10uF 20% 16V 72MA -4
EGR105M050T1G1C11G 1uF 20% 50V 10MA
EGR105M050T1G1C11G 1uF 20% 50V 10MA
EGR105M050T1G1C11G 1uF 20% 50V 10MA
EGR105M050T1G1C11G 1uF 20% 50V 10MA
SMS5. 0TP16VB10M 10uF 20% 16V 72MA -4
RH EP050 Y103M-B-B 10nF 20% 16V X5R SMS5. 0TP16VB10M 10uF 20% 16V 72MA -4
EGR107M016T1G1C11G 100uF 20% 16V
RH EP050 Y103M-B-B 10nF 20% 16V X5R PCX2 335 91593 0.47uF 10% 275V MPP -4
LTW337M450S1A5S45G 330uF 20% 450V 1.9
DCH102K39Y5PP7FJ5A 1nF 10% 2000V Y5P
DCH102K39Y5PP7FJ5A 1nF 10% 2000V Y5P
ESM105M050T1G5C11G 1uF 20% 50V 10MA
ESM336M050T1G5E11G 33uF 20% 50V
MPPS102J3VD 1nF 5% 1.6KV MPP LRYM5471KHA 470pF 10% 1000V Y5R EGR227M160T1G1M32G 220uF 20% 160V
DCT821K20Y5PF6FJ5A 820pF 10% 50V Y5P
ECQV1H104JL3 100nF 5% 50V MPE ECQ-V1H563JL3(TR) 0.056uF 5% 50V MPE
DCT152K22Y5PF6FJ5A 1.5nF 10% 50V Y5P
DCM471K20Y5PL6FJ5A 470pF 10% 500V
ESM228M016T1G5K25G 2200uF 20% 16V
SMS5.0TP10VB100M 100uF 20% 10V 157MA
EGR228M025K6G1L25G 2200uF 20% 25V
SHL5.0TP160VB100M 100uF 20% 160V
SDE222M16FS1 2.2nF 20% 4000V Y5U -25T
ESM477M016T1G5G11G 470uF 20% 16V
SMS5.0TP10VB100M 100uF 20% 10V 157MA
RH EP050 Y103M-B-B 10nF 20% 16V X5R
EGR475M250T1G1G11G 4.7uF 20% 250V
RH UP050 B221K-B-B 220p 10% 50V Y5P RH UP050 B181K-B-B 180pF 10% 50V Y5P
RH UP050 B221K-B-B 220p 10% 50V Y5P DCH122K43Y5PP73K0A 1.2nF 10% 2000V
Inductor,Wire Wound,Axial” LAL02TBR82K
Inductor,Wire Wound,Axial” LAL02TB101K
LOCA. NO PART NO DESCRIPTION
L1203
L217
L218
L221
L222
L223
L224
L401
L402
L403
L404
L501
L504
L802
T402
T403
T803
G1
G10
G11
G12
G13
G14
G15
G16
G17
G18
G2
G20
G21
G22
G23
G24
G25
G27
G28
G29
G3
G30
G33
G34
G35
G37
G38
G39
G4
G40
G41
G42
G43
0LA1000K119
0LA1000K119
0LA1000K119
0LA1000K119
0LA1000K119
0LA0102K119
0LA0102K119
61409B0007A
6140VY0024H
61409B0007C
61409B0007D
0LA0102K119
0LA0821K119
150-C02F
EBJ34806701
151-C02B
61709MC016A
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
Inductor,Wire Wound,Axial LAL02TB101K
Inductor,Wire Wound,Axial LAL02TB101K
Inductor,Wire Wound,Axial LAL02TB101K
Inductor,Wire Wound,Axial LAL02TB101K
Inductor,Wire Wound,Axial LAL02TB101K
Inductor,Wire Wound,Axial LAL02TB100K
Inductor,Wire Wound,Axial LAL02TB100K
Coil,Choke CH-1215S 6mH DC 500V 0A
Coil,Linearity HL-1520S-26.5uH 26.5uH 50V
Coil,Choke CH-1215S 1.6mH 1.6mH DC 500V
Coil,Choke CH-1215S 450uH 450uHH DC
Inductor,Wire Wound,Axial LAL02TB100K
Inductor,Wire Wound,Axial LAL02TB8R2K
Coil,Choke LEAD 82uH 50V 0A 12X17MM
Transformer,FBT BSC25-0363 12.5 112V 7.8V
Transformer,Switching 151-C02B EI2519 0 0
Transformer,Switching 61709MC016A
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
For Capacitor & Resistors,
the charactors at 2nd and 3rd
digit in the P/No. means as
follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
COIL & INDUCTOR
CONNECTOR
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 27
- 27 -
LOCA. NO PART NO DESCRIPTION
G44
G45
G48
G49
G50
G51
G52
G53
G54
G55
G58
G59
G60
G61
G62
G65
G66
G68
G71
G72
G73
G74
H1
H2
H3
H4
JW02C
P101
P1206A
P201
P401
P601
P602
P801
P802
P901
D501
FR301
FR401
FR403
FR501
FR825
J511
J534
J542
J721
R1
R101
R102
R103
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
336-072C
6631V25034H
6631V25014H
387-917J
387-603E
170-853F
366-921B
387-A06G
366-921E
366-043K
366-921B
366-921C
366-043B
366-043B
366-009D
0RD2002F609
0RP0050H709
0RF0181K607
0RF0141K607
0RP0050H709
0RP0020J809
0RD1000F609
0RD1000F609
0RD1001F609
0RD2201F609
0RD1001F609
0RD1000F609
0RD3601F609
0RD1201F609
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
BSP(C2600R) 1P LUG STRAIGHT DIP TP SN
6631V25034H GIL-G-04 35097-9702_35098
6631V25014H GIL-G-03 35097-9702_35098
387-917J 35740-8610 35740-8610 500mM
LPI-025-027 9P 4P-5P UL1007 N . YUEQ
170-853F AE-9306 AE-9306 140mM NONE 1
GIL-G-03P-S3T2-E 3P 2.54MM 1R STRAIGH
387-A06G GIL-G-06 GIL-J-06 400mM 2.50
GIL-G-06P-S3T2-E(TYPOE) 6P 2.50MM 1R
35929-0410 4P 10.00MM 1R STRAIGHT DIP
GIL-G-03P-S3T2-E 3P 2.54MM 1R STRAIGH
GIL-G-04P-S3T2-E(2.54mm) 4P 2.54MM 1R
35929-0210 2P 10.00MM 1R STRAIGHT DIP
35929-0210 2P 10.00MM 1R STRAIGHT DIP
366-009D 1P PIN HEADER STRAIGHT DIP B
RD-96T1J20K0 20KOHM 5% 1/6W
SPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0
FNS02T3J1R80 1.8OHM 5% 2W 12.0X4.0MM
FNS02T3J1R40 1.4OHM 5% 2W 12.0X4.0MM
SPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0
SPF01T1MR020 0.02OHM 20% 1W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J2K20 2.2KOHM 5% 1/6W 3.2X1.8M
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J3K60 3.6KOHM 5% 1/6W 3.2X1.8M
RD-96T1J1K20 1.2KOHM 5% 1/6W 3.2X1.8M
LOCA. NO PART NO DESCRIPTION
R104
R105
R108
R109
R110
R111
R112
R113
R132
R150
R152
R153
R154
R16
R17
R18
R19
R20
R21
R22
R226
R23
R247
R249
R250
R251
R252
R301
R303
R304
R305
R306
R307
R308
R309
R310
R311
R312
R313
R315
R316
R318
R401
R403
R404
R405
R406
R407
R408
R409
R41
R410
0RD0222F609
0RD3900F609
0RD1802F609
0RD1003F609
0RS2702H609
0RD4701F609
0RD2201F609
0RD2201F609
0RX0392K618
0RD1003F609
0RD1002F609
0RD1001F609
0RD1001F609
0RD1201F609
0RD2401F609
0RD2701F609
0RD1801F609
0RD3600F609
0RD4701F609
0RD1003F609
0RD0752F609
0RD4701F609
0RD5100F609
0RD0752F609
0RD0752F609
0RD0752F609
0RD0752F609
0RN1502F409
0RD0151A609
0RD0101A609
0RN1202F609
0RD8202F609
0RN2701F409
0RN4302F409
0RD6801F609
0RD0151A609
0RN3002F409
0RD1502F609
0RN4702F409
0RS1500K619
0RS2701K619
0RS1200K619
0RD0472A609
0RD2001A609
0RD1500F609
0RS3001K619
0RS3301K607
0RD1002A609
0RD4302F609
0RD6203F609
0RD1000F609
0RD5101F609
RD-96T1J22R0 22OHM 5% 1/6W 3.2X1.8MM
RD-96T1J390R 390OHM 5% 1/6W
RD-96T1J18K0 18KOHM 5% 1/6W
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RS-92T1J27K0 27KOHM 5% 1/2W
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J2K20 2.2KOHM 5% 1/6W 3.2X1.8M
RD-96T1J2K20 2.2KOHM 5% 1/6W 3.2X1.8M
S M L02R0J39R0 39OHM 5% 2W
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RD-96T1J10K0 10KOHM 5% 1/6W
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J1K20 1.2KOHM 5% 1/6W 3.2X1.8M
RD-96T1J2K40 2.4KOHM 5% 1/6W 3.2X1.8M
RD-96T1J2K70 2.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J1K80 1.8KOHM 5% 1/6W 3.2X1.8M
RD-96T1J360R 360OHM 5% 1/6W
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MM
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J510R 510OHM 5% 1/6W
RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MM
RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MM
RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MM
RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MM
RN-96T1F15K0 15KOHM 1% 1/6W
RDM92T1J1R50 1.5OHM 5% 1/2W
RDM92T1J1R00 1OHM 5% 1/2W 6.5X2.3MM
RN-96T1J12K0 12KOHM 5% 1/6W
RD-96T1J82K0 82KOHM 5% 1/6W
RN-96T1F2K70 2.7KOHM 1% 1/6W 3.2X1.8M
RN-96T1F43K0 43KOHM 1% 1/6W
RD-96T1J6K80 6.8KOHM 5% 1/6W 3.2X1.8M
RDM92T1J1R50 1.5OHM 5% 1/2W
RN-96T1F30K0 30KOHM 1% 1/6W
RD-96T1J15K0 15KOHM 5% 1/6W
RN-96T1F47K0 47KOHM 1% 1/6W
SML02R0J150R 150OHM 5% 2W 8.6X3.5MM
SML02R0J2K70 2.7KOHM 5% 2W 8.6X3.5MM
SML02R0J120R 120OHM 5% 2W 8.6X3.5MM
RDM92T1J47R0 47OHM 5% 1/2W
RDM92T1J2K00 2KOHM 5% 1/2W
RD-96T1J150R 150OHM 5% 1/6W
SML02R0J3K00 3KOHM 5% 2W 8.6X3.5MM
RSD02T3J3K30 3.3KOHM 5% 2W
RDM92T1J10K0 10KOHM 5% 1/2W
RD-96T1J43K0 43KOHM 5% 1/6W
RD-96T1J620K 620KOHM 5% 1/6W 3.2X1.8M
RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
RD-96T1J5K10 5.1KOHM 5% 1/6W 3.2X1.8M
For Capacitor & Resistors,
the charactors at 2nd and 3rd
digit in the P/No. means as
follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
RESISTOR
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 28
- 28 -
LOCA. NO PART NO DESCRIPTION
R413
R414
R416
R42
R420
R421
R43
R440
R441
R450
R451
R455
R456
R457
R459
R460
R461
R462
R463
R502
R503
R504
R505
R506
R507
R508
R509
R510
R512
R513
R514
R515
R516
R517
R518
R519
R521
R522
R523
R524
R525
R526
R527
R529
R530
R531
R532
R536
R537
R547
R550
R552
0RD0392A609
0RD1002F609
0RS1001J607
0RD1004F609
0RD2403F609
0RD6200F609
0RD2703F609
0RMZVBK002D
0RD3300A609
0RD1001F609
0RD1502F609
0RD3902F609
0RD1203F609
0RD3902F609
0RD1103F609
0RD6201F609
0RD1001F609
0RD6200F609
0RD9100F609
0RD3902F609
0RD1003F609
0RD1002F609
0RD1000F609
0RD1000F609
0RD1000F609
0RD3901F609
0RD3901F609
0RD3901F609
0RN4701F409
0RD1300F609
0RD2200F609
0RD0102F609
0RD2200F609
0RD5601F609
0RD3602F609
0RD9101F609
0RD7501F609
0RD2402F609
0RD1803F609
0RD2700F609
0RD6202F609
0RD4702F609
0RD3600F609
0RD0392F609
0RD3300F609
0RD3300F609
0RD3901F609
0RD3000F609
0RD3300F609
0RD1003A609
0RS1002H609
0CN1030F679
RDM92T1J39R0 39OHM 5% 1/2W
RD-96T1J10K0 10KOHM 5% 1/6W
RS-01T3J1K00 1KOHM 5% 1W 12.0X4.0MM
RD-96T1J1M00 1MOHM 5% 1/6W 3.2X1.8MM
RD-96T1J240K 240KOHM 5% 1/6W 3.2X1.8M
RD-96T1J620R 620OHM 5% 1/6W
RD-96T1J270K 270KOHM 5% 1/6W 3.2X1.8M
RSR05V-J15K0 15KOHM 5% 5W
RDM92T1J330R 330OHM 5% 1/2W
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J15K0 15KOHM 5% 1/6W
RD-96T1J39K0 39KOHM 5% 1/6W
RD-96T1J120K 120KOHM 5% 1/6W 3.2X1.8M
RD-96T1J39K0 39KOHM 5% 1/6W
RD-96T1J110K 110KOHM 5% 1/6W 3.2X1.8M
RD-96T1J6K20 6.2KOHM 5% 1/6W 3.2X1.8M
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J620R 620OHM 5% 1/6W
RD-96T1J910R 910OHM 5% 1/6W
RD-96T1J39K0 39KOHM 5% 1/6W
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RD-96T1J10K0 10KOHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J3K90 3.9KOHM 5% 1/6W 3.2X1.8M
RD-96T1J3K90 3.9KOHM 5% 1/6W 3.2X1.8M
RD-96T1J3K90 3.9KOHM 5% 1/6W 3.2X1.8M
RN-96T1F4K70 4.7KOHM 1% 1/6W 3.2X1.8M
RD-96T1J130R 130OHM 5% 1/6W
RD-96T1J220R 220OHM 5% 1/6W
RD-96T1J10R0 10OHM 5% 1/6W 3.2X1.8MM
RD-96T1J220R 220OHM 5% 1/6W
RD-96T1J5K60 5.6KOHM 5% 1/6W 3.2X1.8M
RD-96T1J36K0 36KOHM 5% 1/6W
RD-96T1J9K10 9.1KOHM 5% 1/6W 3.2X1.8M
RD-96T1J7K50 7.5KOHM 5% 1/6W 3.2X1.8M
RD-96T1J24K0 24KOHM 5% 1/6W
RD-96T1J180K 180KOHM 5% 1/6W 3.2X1.8M
RD-96T1J270R 270OHM 5% 1/6W
RD-96T1J62K0 62KOHM 5% 1/6W
RD-96T1J47K0 47KOHM 5% 1/6W
RD-96T1J360R 360OHM 5% 1/6W
RD-96T1J39R0 39OHM 5% 1/6W 3.2X1.8MM
RD-96T1J330R 330OHM 5% 1/6W
RD-96T1J330R 330OHM 5% 1/6W
RD-96T1J3K90 3.9KOHM 5% 1/6W 3.2X1.8M
RD-96T1J300R 300OHM 5% 1/6W
RD-96T1J330R 330OHM 5% 1/6W
RDM92T1J100K 100KOHM 5% 1/2W
RS-92T1J10K0 10KOHM 5% 1/2W
RH EP050 Y103M-B-B 10nF 20% 16V X5R -
LOCA. NO PART NO DESCRIPTION
R561
R562
R563
R564
R565
R566
R58
R60
R601
R602
R603
R604
R605
R606
R608
R611
R618
R620
R65
R66
R69
R701
R702
R703
R704
R705
R706
R707
R708
R711
R713
R72
R722
R760
R761
R803
R804
R805
R806
R807
R808
R809
R810
R812
R814
R816
R82
R823
R831
R832
R835
R884
0RD1000F609
0RD1000F609
0RD1000F609
0RD1000F609
0RD1001F609
0RD4701F609
0RD4701F609
0RD1002F609
0RD0221A609
0RD0221A609
0RD0221A609
0RD0221A609
0RD4301F609
0RD8201F609
0RD8201F609
0RD4301F609
0RD1002F609
0RS0561K607
0RD2200F609
0RD3301F609
0RD2200F609
0RD1000F609
0RD1000F609
0RD6801F609
0RD1000F609
0RD1003F609
0RD1003F609
0RD1003F609
0RD1003F609
0RD1000F609
0RD2201F609
0RD6800F609
0RD0752F609
0RD1001F609
0RD1001F609
0RD4701F609
0RS4702K607
0RS4702K619
180-A01D
0RD2200A609
0RD1501F609
0RD1001F609
0RD0472F609
0RD1003F609
0RKZVTA001C
0RD2001F609
0RD4701F609
0RS1500K607
0RD4701F609
0RD4701F609
0RD1001F609
0RD1201F609
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J10K0 10KOHM 5% 1/6W
RDM92T1J2R20 2.2OHM 5% 1/2W
RDM92T1J2R20 2.2OHM 5% 1/2W
RDM92T1J2R20 2.2OHM 5% 1/2W
RDM92T1J2R20 2.2OHM 5% 1/2W
RD-96T1J4K30 4.3KOHM 5% 1/6W 3.2X1.8M
RD-96T1J8K20 8.2KOHM 5% 1/6W 3.2X1.8M
RD-96T1J8K20 8.2KOHM 5% 1/6W 3.2X1.8M
RD-96T1J4K30 4.3KOHM 5% 1/6W 3.2X1.8M
RD-96T1J10K0 10KOHM 5% 1/6W
RSD02T3J5R60 5.6OHM 5% 2W 12.0X4.0MM
RD-96T1J220R 220OHM 5% 1/6W
RD-96T1J3K30 3.3KOHM 5% 1/6W 3.2X1.8M
RD-96T1J220R 220OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J6K80 6.8KOHM 5% 1/6W 3.2X1.8M
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J2K20 2.2KOHM 5% 1/6W 3.2X1.8M
RD-96T1J680R 680OHM 5% 1/6W
RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MM
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RSD02T3J47K0 47KOHM 5% 2W 12.0
SML02R0J47K0 47KOHM 5% 2W 8.6X3.5MM
PRW02T3JR160 0.16OHM 5% 2W
RDM92T1J220R 220OHM 5% 1/2W
RD-96T1J1K50 1.5KOHM 5% 1/6W 3.2X1.8M
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J47R0 47OHM 5% 1/6W 3.2X1.8MM
RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8M
RN-92T1J8M20 8.2MOHM 5% 1/2W 9.0X3.0M
RD-96T1J2K00 2KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RSD02T3J150R 150OHM 5% 2W
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8M
RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MM
RD-96T1J1K20 1.2KOHM 5% 1/6W 3.2X1.8M
For Capacitor & Resistors,
the charactors at 2nd and 3rd
digit in the P/No. means as
follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 29
- 29 -
LOCA. NO PART NO DESCRIPTION
R902
R904
R905
R906
R908
R912
R915
R916
R917
R918
R919
R920
R921
R922
R923
SW11
SW12
SW13
SW14
SW15
SW16
SW801
SG901
SG902
SG903
FB801
L804
T804
X1
X501
Z111
A1
A2
0RD2204A609
0CN1030F679
0RD3900F609
0RD1000F609
0RD1801F609
0RS1802K607
0RD3900F609
0RD1000F609
0RS1802K607
0RD1501A609
0RD1501A609
0RD1501A609
0RD1000F609
0RD4300F609
0RS1802K607
140-315H
140-315H
140-315H
140-315H
140-315H
140-315H
6600M000057
165-004A
165-004A
165-004A
125-022R
125-022R
150-F06T
6212AA2998A
156-A01V
6200QL3003W
38289U0580A
38289U0580E
38289U0580F
38289U0580K
38289U0580N
3828VA0383J
38289U0580V
38289U0580L
38289U0580H
38289U0580Z
MFL32369927
6710V00124Y
6710V00018G
RDM92T1J2M20 2.2MOHM 5% 1/2W
RH EP050 Y103M-B-B 10nF 20% 16V X5R
RD-96T1J390R 390OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J1K80 1.8KOHM 5% 1/6W 3.2X1.8M
RSD02T3J18K0 18KOHM 5% 2W
RD-96T1J390R 390OHM 5% 1/6W
RD-96T1J100R 100OHM 5% 1/6W
RSD02T3J18K0 18KOHM 5% 2W
RDM92T1J1K50 1.5KOHM 5% 1/2W
RDM92T1J1K50 1.5KOHM 5% 1/2W
RDM92T1J1K50 1.5KOHM 5% 1/2W
RD-96T1J100R 100OHM 5% 1/6W
RD-96T1J430R 430OHM 5% 1/6W
RSD02T3J18K0 18KOHM 5% 2W
THVH472GBC(HORIZONTAL) 1C1P 12VDC
THVH472GBC(HORIZONTAL) 1C1P 12VDC
THVH472GBC(HORIZONTAL) 1C1P 12VDC
THVH472GBC(HORIZONTAL) 1C1P 12VDC
THVH472GBC(HORIZONTAL) 1C1P 12VDC
THVH472GBC(HORIZONTAL) 1C1P 12VDC
KDC-A02-F AC 250VAC 5A 1PCS 1C1P HORI
152F-L3N/S-23 RADIAL 1.5KV 1.5KV 0A 5
152F-L3N/S-23 RADIAL 1.5KV 1.5KV 0A 5
152F-L3N/S-23 RADIAL 1.5KV 1.5KV 0A 5
BI3857 30OHM 3.6X5.7MM AXIAL TP
BI3857 30OHM 3.6X5.7MM AXIAL TP
150-F06T 20MH 38X26X43MM SQE3535
HLX-308 32.768MHZ 10PPM 32.768MHZ 10P
EUA4.43361F00EYYL 4.433619MHZ 15PPM
HDMIF389A5M 38.9MHZ 17.3*3.9*8.7 SIP
Manual,USER MC059C LG NEU/FL
Manual, USER MC059C LG NAGHI AR/EN
Manual,USER MC059C LG NEU AR/EN
Manual,USER MC059C KA/RU/EN
Manual,USER MC059C FR/EN
Manual,USER MC049B LG 16 GAME
Manual,USER MC059C VLASER RU/EN
Manual,USER MC059C RU/EN
Manual,USER MC059C RUS/BZ RU/EN
Manual,USER MC059C SAKAL HE/AR/EN
Manual,Owners USER MC059C RU/EN
Remote Controller COMPLEX MC059C 21FS2
Remote Controller MC022A GAME
LOCA. NO PART NO DESCRIPTION
A3
B1
F801
JA01
JA1201
LD11
PA01
SK901
TH801
TH803
TU101
VD801
5010V00004B
5010V00004D
450-018C
MAY35755201
MAY35755204
MAY35755205
3890900096D
3890900097D
3890V00067F
372-N74B
MAY35755201
0FS4001B53C
6612VJH023D
6613V00004B
0DLLT0020AA
6712SCA226B
6620VBC003A
163-051F
6322TA080AB
6700MF0018A
164-003K
Antenna,Rod 5010V00004B SINGLE
Antenna,Rod 3SECTION 750MM NTSC
Connector,RF BS901 - STRAIGHT
Box, DW 644 394 502 2 COLOR 21FS6
Box DW 644 394 502 2 COLOR 21FS6
Box, DW 644 394 502 2 COLOR 21FS6
Box, DW2 1074 1104 1080 1 COLOR
Box, DW2 1094 1124 100 1 COLOR
Box, SW 0 0 0 1 COLOR PC-63A 29
Box, SW 0 0 0 NO PRINTING CHASSIS
Box, DW 644 394 502 2 COLOR 21FS6
Fuse,Time Delay 0215 004. CERAMIC 250V
Jack,RCA PPJ126-04 15MM 3RX3C ANGLE
Jack,RCA PJ6054B 14.0MM 3RX1C ANGLE
LED,DIP LTL-4223 ROUND 5MM HIGH
Receiver Module KSM-913LG1T 4.5TO5.5V
Socket,CRT PCS030A 8P STRAIGHT
Thermistor,PTC J503P84D140M290Q 14OHM
Thermistor,NTC TP8D15LKBESMNR 8OHM
Tuner,Analog TAEA-G011D PAL-B/G+I+M+D/K
Varistor INR14D621K(600pF 14MM) 620V
ACCESSORIES
FILTER & CRYSTAL
MISCELLANEOUS
SWITCH
SPARK GAP
For Capacitor & Resistors,
the charactors at 2nd and 3rd
digit in the P/No. means as
follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
Copyright©2007 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Page 30
P/No : 38549D0026A
LGE Internal Use Only
Copyright©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Page 31
SVC. SHEET : 38549D0026A-S
Loading...