Datasheet 218.063, 218.032, 218.050, 218.080, 218.040 Specification

Page 1
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 218 Series
218 Series, 5 x 20 mm, Time-Lag (Slo-Blo
Agency Approvals
Agency Agency File Number Ampere Range
Cartridge Certificates: NBK120802-E10480 A&C
PS
E
Leaded Certificates: NBK120802-E10480 B&D
Certificates:
* Approval for Cartridge versions only
2002010207007596
Certificates: SU05001-3005 SU05001-2008 SU05001-2009
Recognised File: E10480 Guide: JDYX2
File: 029862 Acc. Class: LR1422-30
License: KM41462
File: 9850004, 9843043, 811742, 304650, 416270
License: 40013496
License: 40016604
1A – 5A
6.3A – 15A
32mA – 6.3A
32mA – 40mA
50mA – 800mA
1A – 10A
32mA – 16A
32mA – 15A
80mA – 6.3A
32mA – 6.3A
32mA – 10A
15A*
32mA – 16A
®
) Fuse
PS
E
Description
5x20mm time-Lag glass body cartridge fuse designed to IEC specification.
Features
t %FTJHOFEUP
International (IEC ) Standards for use globally
t .FFUTUIF*&$
60127-2, Sheet 3
specification for time­Lag fuses
t "WBJMBCMFJODBSUSJEHF
and axial lead form
t 3P)4DPNQMJBOUBOE
lead-free
Applications
Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits.
Electrical Characteristics
% of Ampere
Rating
150%
210%
275%
400%
1000%
Ampere Rating Opening Time
32mA–100mA
125mA-6.3A
8A-15A
32mA-100mA 30 minutes, Maximum
125mA-6.3A 30 minutes, Maximum
8A-15A 30 minutes, Maximum
32mA-100mA 0.01 sec., Min.; .5 sec. Max.
125mA-6.3A 0.05 sec., Min.; 2 sec. Max.
8A-15A
32mA-100mA
125mA-6.3A
8A-15A
32mA-100mA .02 second, Maximum
125mA-6.3A .02 second, Maximum
8A-15A
60 minutes, Minimum
60 minutes, Minimum
30 minutes, Minimum
0.05 sec., Min.; 2 sec. Max.
.003 sec., Min.; 0.1 sec. Max.
.01 sec., Min.; 0.3 sec. Max.
.01 sec., Min.; 0.4 sec. Max.
.04 second, Maximum
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/218.html for current information.
269
Revised: January 7, 2009
218 Series
Page 2
Electrical Characteristics
Introduction to Circuit Protection
Introduction to Circuit Protection
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 218 Series
Transientology
Amp
Rating
(A)
Voltage
Rating
Amp Code
.032 0.032 250
(V)
Interrupting
Rating
Nominal
Nominal
Cold
Resistance
(Ohms)
Nominal
Melting
2
t (A2 sec)
I
Voltage Drop at
Rated
Current
(mV)
58.4500 0.00297 5000 1.6 x x x x x x x
Nominal
Power
Dissipation
At Rated
Current
(W)
Agency Approvals
PS
E
.040 0.04 250 35.7000 0.00536 4000 1.6 x x x x x x x
.050 0.05 250 23.3000 0.00692 3500 1.6 x x x x x x x
.063 0.063 250 17.6500 0.0117 3000 1.6 x x x x x x x
.080 0.08 250 12.6000 0.0258 2500 1.6 x x x x x x x x
.100 0.1 250 8.9050 0.0482 2000 1.6 x x x x x x x x
.125 0.125 250 4.2000 0.1465 1900 1.6 x x x x x x x x
.160 0.16 250 2.5500 0.2190 1500 1.6 x x x x x x x x
.200 0.2 250 1.6000 0.3410 1300 1.6 x x x x x x x x
.250 0.25 250 1.0495 0.5405 1100 1.6 x x x x x x x x
.315 0.315 250 0.8475 1.1100 1000 1.6 x x x x x x x x
35A@250Vac
.400 0.4 250 0.5350 1.3250 900 1.6 x x x x x x x x
.500 0.5 250 0.3700 2.8250 300 1.6 x x x x x x x x
.630 0.63 250 0.2750 4.6750 250 1.6 x x x x x x x x
.800 0.8 250 0.0813 3.370 150 1.6 x x x x x x x x
001. 1 250 0.0613 6.730 150 1.6 x x x x x x x x x
1.25 1.25 250 0.0446 12.650 150 1.6 x x x x x x x x x
01.6 1.6 250 0.0336 23.350 150 1.6 x x x x x x x x x
002. 2 250 0.0293 14.450 150 1.6 x x x x x x x x x
02.5 2.5 250 0.0219 23.250 120 1.6 x x x x x x x x x
3.15 3.15 250 0.0173 38.150 100 1.6 x x x x x x x x x
004. 4 250
005. 5 250
06.3 6.3 250
008. 8 250
010. 10 2 50
12.5 12.5 250
015. 15 250
016. 16 250
* Approval for cartidge versions only.
40A @ 250Vac
50A @ 250Vac
63A @ 250Vac
80A @ 250Vac
100A @ 250Vac
63A @ 250Vac
100A @ 250Vac
63A @ 250Vac
0.0129 69.10 100 1.6 x x x x x x x x x
0.0104 111.00 100 1.6 xxxxxxxxx
0.0076 198.50 100 1.6 x x x x x x x x x
0.0059 341.50 100 4 x x x x x x
0.0045 568.00 100 4 x x x x x x
0.0034 889.00 100 4 x x
0.0028 1405.00 100 4 x x x x*
0.0021 1955.00 100 4 x x
Temperature Rerating Curve
218 Series
Average Time Current Curves
270
Revised: January 7, 2009
10000
1000
100
10
TIME IN SECONDS
1
0.1
0.01
0.001
0.01
0.032A
0.040A
0.050A
0.063A
0.080A
0.100A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A1A0.800A
0.630A
1.25A
0.125A
0.1 1 10
Please refer to www.littelfuse.com/series/218.html for current information.
1.6A2A2.5A
CURRENT IN AMPERES
Specifications are subject to change without notice.
3.15A
4A5A6.3A8A10A
15A
100 1000
© 2009 Littelfuse, Inc.
Page 3
Soldering Parameters - Wave Soldering
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
Temperature (°C) - Measured on bottom side of board
0
102030405060708090
Time (Seconds)
Preheat Time
100
110
120
130
140
150
Dwell Time
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 218 Series
Recommended Process Parameters:
Wave Parameter Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
Temperature Minimum:
Temperature Maximum:
Preheat Time: 60-180 seconds
Solder Pot Temperature:
Solder Dwell Time: 2-5 seconds
160
170
180
190
200
210
220
230
240
Recommended Hand-Solder Parameters:
Cooling Time
Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or Convection Reflow process.
(Typical Industry Recommendation)
100
° C
150
° C
260
° C Maximum
Product Characteristics
Material
Terminal Strength
Solderability
Product Marking
Packaging
Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper
MIL-STD-202G, Method 211A, Test Condition A
Reference IEC 60127 Second Edition 2003-01 Annex A
Cap1: Brand logo, current and
voltage ratings
Cap2: Agency approval marks
Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel)
Operating Temperature –55ºC to +125ºC
Thermal Shock
MIL-STD-202G, Method 107G, Test Condition B: (5 cycles –65
°
C to
+125°C)
Vibration MIL-STD-202G, Method 201A
MIL-STD-202G, Method 103B, Test
Humidity
Condition A. high RH (95%) and elevated temperature (40
°
C) for 240
hours.
Salt Spray
MIL-STD-202G, Method 101D, Test Condition B
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/218.html for current information.
271
Revised: January 7, 2009
218 Series
Page 4
Introduction to Circuit Protection
Introduction to Circuit Protection
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 218 Series
Transientology
Dimensions
20+0.5
5.1+0.6
5.2+0.1
-0.2
6.0 MAX
0218 000P
0218.032 XEP
5.1+0.6
40
22.5 MAX
to
0218.100XEP
0218.125 XEP
0.65
40
22.5 MAX
5.8 MAX
to
0218015. XEP
Notes: * Ratings above 6.3A have 0.8 mm dia lead
0.65*
All dimensions in mm
Packaging
Packaging Option Packaging Specification Quantity
Bulk N/A 1000 MX N/A
Bulk N/A 1000 MXE N/A
Reel and Tape EIA 296- E 1000 MRET1 T1=52mm (2.062”)
Part Numbering System
0218 xxxx M X E P
Series
Amp Code
Refer to Amp Code column of Electrical Characteristics Table
Quantity Code
M = 1000
Packaging Code
X = Filler
Option Codes
Blank : Cartidge Type Fuse E : Axial Leaded Fuse
Lead-free
Quantity &
Packaging Code
Taping Width
218 Series
272
Revised: January 7, 2009
© 2009 Littelfuse, Inc.
Please refer to www.littelfuse.com/series/218.html for current information.
Specifications are subject to change without notice.
Loading...