Page 1
© 1997 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
QPL
500 Watt Axial Leaded TVS
1N6102A
Thru
1N6137A
TEL:805-498-2111 FAX:805-498-3804
DESCRIPTION
The 1N61xx series of transient voltage suppressors are
designed to protect military and commercial electronic
equipment from overvoltages caused by lightning, ESD,
EFT, inductive load switching, and EMP. These devices are
constructed using two p-n junction TVS diodes in a back-toback configuration, hermetically sealed in a voidless glass
package. The hermetically sealed package provides high
FEATURES:
• 500 Watts Peak Pulse Power (tp = 10/1000µs)
• Voidless hermetically sealed glass package
• Metallurgically bonded
• High surge capacity
• Military & Industrial applications
• Available in JAN, JTX, and JTXV versions per
MIL-S-19500/516
reliability in harsh environmental conditions. TVS diodes
are further characterized by their high surge capability, low
operating and clamping voltages, and a theoretically
instantaneous response time. This makes them ideal for
use as board level protection for sensitive semiconductor
components.
MECHANICAL CHARACTERISTICS:
• Hermetically sealed glass package
• Tinned copper leads
• Marking : P/N, date code, logo
MAXIMUM RATINGS
RATING SYMBOL VALUE UNIT
Peak Pulse Power (tp = 10 x 1000µs) Ppk 500 Watts
Operating Temperature Tj -65 to +175 °C
Storage Temperature Tstg -65 to +175 °C
Steady-State Power Dissipation @ TL = 75ºC (3/8”) PD 3 Watts
ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise specified)
DEVICE
TYPE
1N6102A 5.2 100 6.46 175 10.5 47.6 0.05 4000
1N6103A 5.7 50 7.13 175 11.2 44.6 0.06 750
1N6104A 6.2 20 7.79 150 12.1 41.3 0.06 500
1N6105A 6.9 20 8.65 150 13.4 37.3 0.06 300
1N6106A 7.6 20 9.50 125 14.5 34.5 0.07 200
1N6107A 8.4 20 10.45 125 15.6 32.0 0.07 200
1N6108A 9.1 20 11.40 100 16.9 29.6 0.07 150
1N6109A 9.9 20 12.35 100 18.2 27.5 0.08 150
1N6110A 11.4 20 14.25 75 21.0 23.8 0.08 100
1N6111A 12.2 20 15.20 75 22.3 22.4 0.08 100
1N6112A 13.7 1 17.10 65 25.1 19.9 0.085 100
1N6113A 15.2 1 19.0 65 27.7 18.0 0.085 100
1N6114A 16.7 1 20.9 50 30.5 16.4 0.085 100
1N6115A 18.2 1 22.8 50 33.3 15.0 0.09 100
1N6116A 20.6 1 25.7 50 37.4 13.4 0.09 100
1N6117A 22.8 1 28.5 40 41.6 12.0 0.09 100
1N6118A 25.1 1 31.4 40 45.7 10.9 0.095 100
1N6119A 27.4 1 34.2 30 49.9 10.0 0.095 100
1N6120A 29.7 1 37.1 30 53.6 9.3 0.095 100
1N6121A 32.7 1 40.9 30 59.1 8.5 0.095 100
1N6122A 35.8 1 44.7 25 64.6 7.7 0.095 100
1N6123A 38.8 1 48.5 25 70.1 7.1 0.095 100
1N6124A 42.6 1 53.2 20 77.0 6.5 0.095 100
1N6125A 47.1 1 58.9 20 85.3 5.9 0.100 100
1N6126A 51.7 1 64.6 20 97.1 5.1 0.100 100
1N6127A 56.0 1 71.3 20 103.1 4.8 0.100 100
1N6128A 62.2 1 77.9 15 112.8 4.4 0.100 100
1N6129A 69.2 1 86.5 15 125.1 4.0 0.100 100
1N6130A 76.0 1 95.0 12 137.6 3.6 0.100 100
1N6131A 83.6 1 104.5 12 151.3 3.3 0.100 100
1N6132A 91.2 1 114.0 10 165.1 3.0 0.100 100
1N6133A 98.8 1 123.5 10 178.8 2.8 0.105 100
1N6134A 114.0 1 142.5 8 206.3 2.4 0.105 100
1N6135A 121.6 1 152.0 8 218.4 2.3 0.105 100
1N6136A 136.8 1 171.0 5 245.7 2.0 0.110 100
1N6137A 152.0 1 190.0 5 273.0 1.8 0.110 100
1. Non-A Part has 5% higher clamping voltage, 5% lower minimum breakdown voltage, and 5% lower peak pulse current.
REVERSE
STAND-OFF
VOLTAGE
V
RWM
(V) (µA) (V) (mA) (V) (A) % / °C (A)
REVERSE
LEAKAGE
CURRENT
I
R
MINIMUM
BREAKDOWN
VOLTAGE
VBR @ I
T
TEST
CURRENT
I
T
MAXIMUM
CLAMPING
VOLTAGE
VC @ I
PP
PEAK PULSE
CURRENT
Ipp
tp = 1ms
TEMPERATURE
COEFFICIENT
OF V
BR
αVz
MAXIMUM
REVERSE
LEAKAGE
CURRENT (Ir2)
TA=+150°C
Page 2
© 1997 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
QPL
Ppp - Peak Pulse Power (kW)
500 Watt Axial Leaded TVS
1N6102A
Thru
1N6137A
TEL:805-498-2111 FAX:805-498-3804
PEAK PULSE POWER vs. PULSE TIME
100
10
1
0.1
0.1 1 10 100 1000 10000
STEADY STATE DERATING CHARACTERISTICS
FOR FREE AIR MOUNTING
2.5
2
1.5
MAX. POWER (W)
1
0.5
0
0 20 40 60 80 100 120 140 160 180
Pulse Duration (us)
AMBIENT TEMPERATURE (TA) IN degC
10x1000µs IMPULSE WAVEFORM
PULSE DERATING CURVE
100
Tj (oC)
Pulse conditions as
defined by 10 X 1000us
impulse waveform
Pp or
Ipp in %
of max
ratings
60
40
20
0
0 40 80 120 160 200
MECHANICAL OUTLINE
B
A
C
D
B
DIM
NOTES :
N
0.085 2.1 3.6
A
B
C
0.026 0.033 0.66 0.84
D
1. Controlling dimension is inches.
2. Includes uncontrolled area of device leads.
DIMENSIONS
INCHES MM
MAXMIN MAXMIN
0.140
1.3001.00
25.4 33.0
0.2450.140 3.5 6.3
SCHEMATIC
NOTE
2
Loading...