Page 1
1600 SERIES
Dual and Quad Data-bus Isolators
INVERTED +VE GOING PULSE INVERTED –VE GOING PULSE
FEATURES
■ Logic Translation
■ Bi-Directional
■ Invert / Non-Invert
■ TTL-CMOS Convert
■ 3V-5V convert
■ Toroidal construction
■ Low Profile
■ Dual or Quad packs
■ 700VDC Isolation
DESCRIPTION
TThe 1600 series are dual or quad isolation
transformer packs for use in digital circuits.
They are particularly suited to isolating
microprocessor bus connections and
performing logic level translation.
Being completely passive, power savings
are offered over opto-coupled or emitter
follower solutions.
Operating free air temperature range 0°C to 70°C
Storage temperature range --40°C to 125°C
Lead Temperature 1.5mm from case for 10 seconds 300°C
Isolation voltage (flash tested for 1 second) 700VDC
Insulation resistance at 500VDC >10GΩ
ABSOLUTE MAXIMUM RATINGS
NON-INVERTED +VE GOING PULSE NON-INVERTED –VE GOING PULSE
SELECTION GUIDE
Order Code Type Function uS mH pF
1600 Quad Isolator 5V to 5V Logic Isolation 5 1:1 3 60 2
1601 Dual Isolator 5V to 5V Logic Isolation 5 1:1 3 60 1
1620 Quad Isolator 5V to 10V Logic Isolation 3.4 1:2 1.5 45 2
1621 Dual Isolator 5V to 10V Logic Isolation 3.4 1:2 1.5 45 1
1630 Quad Isolator 5V to 15V Logic Isolation 2.6 1:3 1 34 2
1631 Dual Isolator 5V to 15V Logic Isolation 2.6 1:3 1 34 1
1635 Quad Isolator 3.3V to 5V Logic Isolation 5 1:1.5 2 40 2
1636 Dual Isolator 3.3V to 5V Logic Isolation 5 1:1.5 2 40 1
1 The maximum pulse width limit to be applied to the repetition curve.
All specifications typical at T
A
=25°C
Pulse Width
(max)
Turns Ratio
Primary
Inductance (typ)
10kHz, 250mV
Interwinding
Capacitance (typ)
100kHz
Package
Style
Parameter Conditions MAX Units
Propagation delay, t
PD
LSTTL Buffer drive 5.0 ns
Low-level pulse width1, t
LPW
Other terminal to VCC 5.0 µs
High-level pulse width1, t
HPW
Other terminal to GND 5.0 µs
SWITCHING CHARACTERISTICS, 5V LOGIC
0V0V
1
2
16
15
Quad-Bus
Isolator
0V
1
2
16
15
Quad-Bus
Isolator
0V
+5V +5V
1
2
16
15
Quad-Bus
Isolator
+5V +5V
1
2
16
15
Quad-Bus
Isolator
www.cdpoweronline.com
Page 2
1600 SERIES
Dual and Quad Data-bus Isolators
C&D Technologies (NCL) Limited reserve the right to alter or improve the
specification, internal design or manufacturing process at any time, without
notice. Please check with your supplier or visit our web site to ensure that
you have the current and complete specification for your product before use.
© C&D Technologies (NCL) Limited 2000 NMP 1600.2
No part of this publication may be copied, transmitted or stored in a
retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior
written permission from C&D Technologies (NCL) Limited.
Instructions for use are available from www.cdpoweronline.com
MECHANICAL DIMENSIONS (PACKAGE STYLE 1)
All dimensions in mm (±0.25mm unless otherwise stated)
12.90
6.86
8.00
8.65
10 PIN DIL (TOP VIEW)
N
10 9 7 6
12 45
N
11
0.25±0.05
10.16
5.80
4.50
REPETITION RATE VERSUS PULSE WIDTH CURVE
2.54 0.50±0.05
0.64±0.15
MECHANICAL DIMENSIONS (PACKAGE STYLE 2)
All dimensions in mm (±0.25mm unless otherwise stated)
22.50
6.86
8.00
8.65
16 PIN DIL (TOP VIEW)
N
16 15 14 13 12 11 10 9
12345678
1
N
1
N
1
N
1
0.25±0.05
17.78
5.80
4.50
2.54 0.50±0.05
Operating Region
t
PW
max
0.1 1 10 100
t
T
(µs)
t
PW
(µs)
10
1
0.1
t
PW
t
T
0.64±0.15
C&D Technologies (NCL) Ltd
Tanners Drive, Blakelands North
Milton Keynes MK14 5BU, England
Tel: +44 (0)1908 615232
Fax:+44 (0)1908 617545
email: [email protected]
www.cdpoweronline.com
C&D Technologies Inc.
3400 E Britannia Drive, Tucson,
Arizona 85706, USA
Tel: +1 (800) 547-2537
Fax: +1 (520) 741-4598
email: [email protected]
Loading...