Datasheet 1.5KE6.8A, 1.5KE7.5A, 1.5KE8.2A, 1.5KE9.1A, 1.5KE10A Datasheet

Transient Voltage Suppression Diodes

Pb

e3

Datasheet

Samples

Axial Leaded – 1500W > 1.5KE series

1.5KE Series

Uni-directional

Bi-directional

Agency Approvals

AGENCY AGENCY FILE NUMBER

E230531

Maximum Ratings and Thermal Characteristics
(T

=25OC unless otherwise noted)

A

Parameter Symbol Value Unit

Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
(Note 1), (Note 4)

Steady State Power Dissipation on
Infinite Heat Sink at T

Peak For ward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)

Operating Junction and Storage
Temperature Range

Typical Thermal Resistance
Junction to Lead

Typical Thermal Resistance
Junction to Ambient

Notes:

1. Non-repetitive current pulse , per Fig. 4 and derated above T

2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.

< 3.5V for single die parts and VF< 5.0V for stacked-die parts.

3. V

F

of stacked-die parts is 2kW and please contact littelfuse for the detail

4. The P

PPM

stacked-die parts.

=75ºC

L

P

PPM

P

D

I

FSM

V

F

, T

T

J

STG

R

θJL

R

θJA

(initial) =25OC per Fig. 3.

J

150 0 W

6.5 W

200 A

3.5/5.0 V

-55 to 175 °C

15 °C/W

75 °C/W

RoHS

Description

The 1.5KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.

Features

• 1500W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%

• Glass passivated chip
junction in DO-201
Package

• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min

• Excellent clamping
capability

• Typical failure mode is

short from over-specified
voltage or current

• Whisker test is conducted

based on JEDEC
JESD201A per its table 4a
and 4c

• IEC-61000-4-2 ESD

30kV(Air), 30kV (Contact)

• ESD protection of data

lines in accordance with
IEC 61000-4-2

• EFT protection of data
lines in accordance with
IEC 61000-4-4

• Low incremental surge
resistance

• Typical I
when V

less than 1μA

R

min>12V

BR

• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension

• V

@ TJ= VBR@25°C

BR

x (1+

αT x (T

(

αT:Temperature

- 25))

J

Coefficient, typical value
is 0.1%)

• Plastic package is
flammability rated V-0 per
Underwriters Laboratories

• Matte tin lead–free plated

• Halogen free and RoHS
compliant

• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD­609A.01)

Applications

TVS devices are ideal for the protection of I/O interfaces,
V

bus and other vulnerable circuits used in telecom,

CC

computer, industrial and consumer electronic applications.

Functional Diagram

Bi-directional

Cathode

Uni-directional

© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15

Additional Infomarion

Resources

Anode

Transient Voltage Suppression Diodes

Axial Leaded – 1500W > 1.5KE series

Electrical Characteristics (T

Part

Number

(Uni)

Part

Number

(Bi)

=25°C unless otherwise noted)

A

Reverse

Stand off

Voltage V

(Volts)

Breakdown Voltage VBR

R

MIN MAX

(Volts) @ I

Test

T

Current

IT (mA)

Clamping

Voltage

VC @ Ipp

(Volts)

Maximum

Maximum

Peak Pulse

Current I

(A)

pp

Maximum

Reverse

Leakage IR @

VR (µA)

1.5KE6.8A 1.5KE6.8CA 5.80 6.45 7. 1 4 10 10.5 144.8 1000 X

1.5KE7.5A 1.5KE7.5CA 6.40 7. 13 7.88 10 11. 3 134.5 500 X

1.5KE8.2A 1.5KE8.2CA 7.02 7.79 8.61 10 12.1 125.6 200 X

1.5KE9.1A 1.5KE9.1CA 7.78 8.65 9.50 1 13.4 113.4 50 X

1.5KE10A 1.5KE10CA 8.55 9.50 10.50 1 14.5 104.8 10 X

1.5KE11A 1.5KE11CA 9.40 10.50 11.60 1 15.6 97.4 5 X

1.5KE12A 1.5KE12CA 10.20 11.40 12.60 1 16.7 91.0 5 X

1.5KE13A 1.5KE13CA 11. 10 12.40 13.70 1 18.2 83.5 1 X

1.5KE15A 1.5KE15CA 12.80 14.30 15.80 1 21.2 71.7 1 X

1.5KE16A 1.5KE16CA 13.60 15.20 16.80 1 22.5 67.6 1 X

1.5KE18A 1.5KE18CA 15.30 1 7. 1 0 18.90 1 25.2 60.3 1 X

1.5KE20A 1.5KE20CA 1 7. 10 19.00 21.00 1 27.7 54.9 1 X

1.5KE22A 1.5KE22CA 18.80 20.90 23.10 1 30.6 49.7 1 X

1.5KE24A 1.5KE24CA 20.50 22.80 25.20 1 33.2 45.8 1 X

1.5KE27A 1.5KE27CA 23.10 25.70 28.40 1 37.5 40.5 1 X

1.5KE30A 1.5KE30CA 25.60 28.50 31.50 1 41.4 36.7 1 X

1.5KE33A 1.5KE33CA 28.20 31.40 34.70 1 45.7 33.3 1 X

1.5KE36A 1.5KE36CA 30.80 34.20 37.80 1 49.9 30.5 1 X

1.5KE39A 1.5KE39CA 33.30 37.10 41.00 1 53.9 28.2 1 X

1.5KE43A 1.5KE43CA 36.80 40.90 45.20 1 59.3 25.6 1 X

1.5KE47A 1.5KE47CA 40.20 44.70 49.40 1 64.8 23.5 1 X

1.5KE51A 1.5KE51CA 43.60 48.50 53.60 1 70.1 21.7 1 X

1.5KE56A 1.5KE56CA 47.80 53.20 58.80 1 77.0 19.7 1 X

1.5KE62A 1.5KE62CA 53.00 58.90 65.10 1 85.0 1 7. 9 1 X

1.5KE68A 1.5KE68CA 58.10 64.60 71.40 1 92.0 16.5 1 X

1.5KE75A 1.5KE75CA 64.10 71.30 78.80 1 103.0 14.8 1 X

1.5KE82A 1.5KE82CA 70.10 77.90 86.10 1 113.0 13.5 1 X

1.5KE91A 1.5KE91CA 77.80 86.50 95.50 1 125.0 12.2 1 X

1.5KE100A 1.5KE100CA 85.50 95.00 105.00 1 137.0 11. 1 1 X

1.5KE110A 1.5KE110CA 94.00 105.00 116.00 1 152.0 10.0 1 X

1.5KE120A 1.5KE120CA 102.00 114.00 126.00 1 165.0 9.2 1 X

1.5KE130A 1.5KE130CA 111.0 0 124.00 137.00 1 179.0 8.5 1 X

1.5KE150A 1.5KE150CA 128.00 143.00 158.00 1 207.0 7. 3 1 X

1.5KE160A 1.5KE160CA 136.00 152.00 168.00 1 219.0 6.9 1 X

1.5KE170A 1.5KE170CA 145.00 162.00 179.00 1 234.0 6.5 1 X

1.5KE180A 1.5KE180CA 154.00 171.00 189.00 1 246.0 6.2 1 X

1.5KE200A 1.5KE200CA 171.00 190.00 210.00 1 274.0 5.5 1 X

1.5KE220A 1.5KE220CA 185.00 209.00 231.00 1 328.0 4.6 1 X

1.5KE250A 1.5KE250CA 214.00 237.00 263.00 1 344.0 4.4 1 X

1.5KE300A 1.5KE300CA 256.00 285.00 315.00 1 414.0 3.7

1 X

1.5KE320A 1.5KE320CA 273.00 304.00 336.00 1 441.0 3.5 1 X

1.5KE350A 1.5KE350CA 300.00 332.00 368.00 1 482.0 3.2 1 X

1.5KE400A 1.5KE400CA 342.00 380.00 420.00 1 548.0 2.8 1 X

1.5KE440A 1.5KE440CA 376.00 418.00 462.00 1 602.0 2.5 1 X

1.5KE480A 1.5KE480CA 408.00 456.00 504.00 1 658.0 2.3 1

1.5KE510A 1.5KE510CA 434.00 485.00 535.00 1 698.0 2.1 1

1.5KE530A 1.5KE530CA 451.00 503.50 556.50 1 725.0 2.1 1

1.5KE540A 1.5KE540CA 460.00 513.00 567.00 1 740.0 2.0 1

1.5KE550A 1.5KE550CA 468.00 522.50 577.50 1 760.0 2.0 1

1.5KE600A 1.5KE600CA 512.00 570.00 630.00 1 828.0 1. 8 1

F
For bidirectional type having V

For parts without A, the V

of 10 volts and less, the IR limit is double.

R

is ± 10% and VC is 5% higher than with A parts.

BR

Agency

Approval

Specifications are subject to change without notice.

© 2015 Littelfuse, Inc.

Revised: 11/20/15

Transient Voltage Suppression Diodes

Voltage Transients

Time

Voltage Across TVS

Current Through TVS

Voltage or Current

td-Pulse Width (ms)

P

PPM

-Peak Pulse Power (kW)

0.1

1

10

100

0.0010.010.1 110

stacked-die, 2kW
at 10x1000

µs, 25°C

TJ initial = T

amb

Single die, 1.5kW
at 10x1000

µs, 25°C

Axial Leaded – 1500W > 1.5KE series

I-V Curve Characteristics

Uni-directional

BR

V

Vc

VR

IR

VF

IT

V

Bi-directional

BR

V

Vc

VR

Ipp

P

Peak Pulse Power Dissipation -- Max power dissipation

PPM

V

Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation

R

V

Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)

BR

V

Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current)

C

I

Reverse Leakage Current -- Current measured at V

R

V

Forward Voltage Drop for Uni-directional

F

Ratings and Characteristic Curves (T

Figure 1 - TVS Transients Clamping Waveform

R

=25°C unless otherwise noted)

A

Figure 2 - Peak Pulse Power Rating

Ipp

IT
IR

IR
IT

VR

BR

V

V

Vc

Ipp

© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15

continues on next page.

Transient Voltage Suppression Diodes

Peak Pulse Power (P

PP

) or Current (I

PP

)

Derating in Percentage %

0

25

50

75

100

0255075 100 125 150 175 200

TJ - Initial Junction Temperature (ºC)

Transient Thermal Impe dance (°C/W)

-Pulse Dura tion (s)

T

P

0.1

1

10

100

0.01 0.11 10 100 1000

I

F

-Peak Forward Current(A)

VF-Peak Forward Voltage(V)

0.1

1.0

10.0

100.0

0.01.0 2.03.0 4.05.0 6.07.0 8.09.0

Stacked-die

Single die

Axial Leaded – 1500W > 1.5KE series

Ratings and Characteristic Curves (T

=25°C unless otherwise noted) (Continued)

A

Figure 3 - Peak Pulse Power Derating Curve

Figure 5 - Typical Junction Capacitance

100000

Uni-directional V=0V

Bi-directional V=0V

VR

Cj(pF)

10000

1000

100

Uni-directional V=

Figure 4 - Pulse Waveform

150

RSM

100

50

- Peak Pulse Current, % I

PPM

I

0

tr=10µsec

Peak Value
I

PPM

t

d

0

1.0 2.0 3.0 4.0

Half Value
I

PPM

( )

TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I

I

PPM

2

10/1000µsec. Waveform
as defined by R.E.A

PPM

t-Time (ms)

Figure 6 - Typical Transient Thermal Impedance

10

1

110100 1000

Bi-directional V=

VBR-Reverse Breakdown Voltage(V)

Figure 7 - Maximum Non-Repetitive Peak Forward

Surge Current Uni-Directional Only

200

180

160

140

120

100

80

60

40

- Peak Forward Surge Current (A)

FSM

I

20

0

110 100

Number of Cycles at 60 Hz

V

R

Figure 8 - Peak Forward Voltage Drop vs Peak Forward

Current (Typical Values)

Specifications are subject to change without notice.

© 2015 Littelfuse, Inc.

Revised: 11/20/15

Transient Voltage Suppression Diodes

Cathode Band

Axial Leaded – 1500W > 1.5KE series

Soldering Parameters

Reflow Condition

- Temperature Min (T

Pre Heat

- Temperature Max (T

) 150°C

s(min)

) 200°C

s(max)

Lead–free
assembly

- Time (min to max) (ts) 60 – 180 secs

Average ramp up rate (Liquidus Temp (T
to peak

to TA - Ramp-up Rate 3°C/second max

T

S(max)

Reflow

- Temperature (TA) (Liquidus) 217°C

- Time (min to max) (ts) 60 – 150 seconds

Peak Temperature (TP) 260

Time within 5°C of actual peak
Temperature (t

)

p

)

A

3°C/second max

20 – 40 seconds

+0/-5

°C

Ramp-down Rate 6°C/second max

Time 25°C to peak Temperature (T

Do not exceed

) 8 minutes Max.

P

260°C

Physical Specifications

Weight 0.045oz., 1.2g

Case

JEDEC DO-201 molded plastic body
over passivated junction.

t

T

P

Ramp-up Critical Zone

T

L

T

s(max)

T

s(min)

Temperature (T)

25˚C

t

s

Preheat

t 25˚C to Peak

Time (t)

p

Flow/Wave Soldering (Solder Dipping)

Peak Temperature : 265OC

Dipping Time : 10 seconds

Soldering : 1 time

Environmental Specifications

High Temp. Storage JESD22-A103

HTRB JESD22-A108

T

T

to

L

t

L

P

Ramp-down

Polarity

Terminal

Dimensions

Color band denotes the cathode except
Bipolar.

Matte Tin axial leads, solderable per

Temperature Cycling JESD22-A104

H3TRB JESD22-A101

JESD22-B102.

RSH JESD22-B106

Dimensions

(for Uni-directional products only)

D

C

A

B

A

A 1.000 - 25.40 -

B 0.285 0.375 7.20 9.50

C 0.038 0.042 0.96 1.07

D 0.190 0.210 4.80 5.30

Inches Millimeters

Min Max Min Max

DO-201

© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15

Transient Voltage Suppression Diodes

OPTION CODE:
BLANK Reel Tape

-B Bulk Packaging

SERIES CODE

1.5KE

xxx XX

X

TYPE CODE:
A Uni-Directional (5%

V

BR

Voltage Tolerance)

CA Bi-Directional (5%

V

BR

Voltage Tolerance)

V

BR

VOLTA GE CODE

(Refer to the Electrical Characteristics table)

Trace Code Marking

Cathode Band

(for Uni-directional
products only

R

Axial Leaded – 1500W > 1.5KE series

Part Numbering System

Part Marking System

Littelfuse Logo

Packaging

Part Number

Component

Package

Quantity

1.5KExxxXX DO-201 1200 Tape & Reel EIA STD RS-296

1.5KExxxXX-B DO-201 500 BULK Littelfuse Spec.

Packaging

Option

Packaging Specification

Tape and Reel Specification

)

YYWW

F

1.5KEXXX

YY:Year Code
WW: Week Code

Product Type

2.56

(65.0)

0.394+/-0.020

(10.0+/-0.5)

0.68

(17. 27)

2.75

(69.85)

ecess Depth Max. 0.75 (19.05)

13.0

(330.2)

3.0

(76.2)

Off Center
either side

0.028(0.7)

0.047

(1.2)

Dimensions are in
inches/mm

Direction of Feed

2.063+0.079/-0.039

(53.0+2.0/-1.0)

0.236

(6.0)

Specifications are subject to change without notice.

© 2015 Littelfuse, Inc.

Revised: 11/20/15