Page 1
www.vishay.com
138 AML
021 ASM
118 AHT
longer
life
smaller
dimensions
120 AT
C
Aluminum Electrolytic Capacitors
Fig. 1
138 AML
Vishay BCcomponents
Axial Miniature, Long-Life
FEATURES
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Axial leads, cylindrical aluminum case, insulated
with a blue sleeve
(case Ø 6.3 mm x 12.7 mm and 7.7 mm x 12.7 mm are
molded with flame retardant plastic material)
• Mounting ring version not available in insulated form
• Taped versions up to case Ø 15 mm x 30 mm available for
automatic insertion
• Charge and discharge proof
• Long useful life: 2000 h to 10 000 h at 105 °C, high
reliability
• High ripple current capability
• Miniaturized, high CV-product per unit volume
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes
(Ø D x L in mm)
Rated capacitance range, C
Tolerance on C
Rated voltage range, U
Category temperature range -40 °C to +105 °C
Endurance test at 105 °C 1000 h 5000 h
Useful life at 105 °C 2000 h 10 000 h
Useful life at 40 °C,
applied
I
R
Shelf life at 0 V, 105 °C 500 h
Based on sectional
specification
Climatic category IEC 60068 40 / 105 / 56
R
R
6.3 x 12.7
to 10 x 25
R
2.2 μF to 15 000 μF
± 20 %
6.3 V to 100 V
applied:
1.3 x I
R
200 000 h
IEC 60384-4 / EN130 300
10 x 30
to 21 x 38
1.8 x IR applied:
500 000 h
APPLICATIONS
• Industrial, automotive, EDP and telecommunication
• Smoothing, filtering, buffering in SMPS; coupling,
decoupling, timing
• Portable and mobile equipment (small size, low mass)
• Stand-by applications
• Low mounting height boards, vibration and shock
resistant
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Upper category temperature (105 °C)
• Date code, in accordance with IEC 60062
• Code for factory of origin
• Name of manufacturer
• Negative terminal identification
• Series number (138)
Revision: 27-Mar-2020
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1
Document Number: 28332
Page 2
L
63.5 ± 1.5
Ø D
Ø d
+
F
Form BR: Taped on reel
Form BA: Taped in box (ammopack)
Case Ø D x L = 6.3 mm x 12.7 mm to 7.7 mm x 12.7 mm
Form AA: Axial in box
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
33 ± 1
Ø D
Ø d
I
L
F
138 AML
www.vishay.com
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
(V)
C
R
(μF)
6.3101625405063100
2.2-------6.3 x 12.7
4.7 - - - - - - 6.3 x 12.7 7.7 x 12.7
10 - - - 6.3 x 12.7 - 6.3 x 12.7 7.7 x 12.7 6.5 x 18
22 - - 6.3 x 12.7 6.3 x 12.7 - 7.7 x 12.7 6.5 x 18 8 x 18
33----7.7 x 12.7--47 - - 6.3 x 12.7 7.7 x 12.7 6.5 x 18 - 8 x 18 10 x 25
68-------10 x 30
100 6.3 x 12.7 - 7.7 x 12.7 6.5 x 18 8 x 18 10 x 18 10 x 25 12.5 x 30
150 - 7.7 x 12.7 - - - - 10 x 30 15 x 30
220 7.7 x 12.7 6.5 x 18 8 x 18 10 x 18 10 x 25 - 12.5 x 30 15 x 30
330 - - - - 10 x 30 - 12.5 x 30 18 x 30
470 6.5 x 18 8 x 18 10 x 18 10 x 25 12.5 x 30 - 15 x 30 18 x 38
680 - - - 10 x 30 12.5 x 30 - 18 x 30 21 x 38
1000 10 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 - 18 x 38 1500 - 10 x 30 12.5 x 30 15 x 30 18 x 30 - 21 x 38 2200 10 x 25 12.5 x 30 15 x 30 18 x 30 18 x 38 - - 3300 - 15 x 30 18 x 30 18 x 38 21 x 38 - - 4700-18 x 3018 x 3018 x 38---6800-18 x 3818 x 3821 x 38----
10 000-18 x 3821 x 38----15 000-21 x 38------
U
R
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Forms BA and BR Fig. 3 - Forms BA and BR
73 ± 1.6
Ø D
Form BR: Taped on reel
Case Ø D x L = 6.5 mm x 18 mm to 15 mm x 30 mm
Form BA: Taped in box (ammopack)
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
L
F
Ø d
Revision: 27-Mar-2020
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 4 - Form AA
2
For technical questions, contact: [email protected]
Document Number: 28332
Page 3
138 AML
www.vishay.com
Table 1
AXIAL; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE
(mm)
6.3 x 12.7 (2) 0.6 - 6.5 12.9 17.5 1.1 - 1000 1000
7.7 x 12.7 (3) 0.6 - 7.9 12.9 17.5 1.3 - 500 500
6.5 x 18 4 0.8 - 6.9 18.5 25 1.3 - 1000 1000
8 x 18 5 0.8 - 8.5 18.5 25 1.7 - 500 500
10 x 18 6 0.8 - 10.5 18.5 25 2.5 - 500 500
10 x 25 7 0.8 - 10.5 25.5 30 3.3 - 500 500
10 x 30 00 0.8 55 ± 1 10.5 30.5 35 4.8 340 - 500
12.5 x 30 01 0.8 55 ± 1 13.0 30.5 35 7.4 260 - 400
15 x 30 02 0.8 55 ± 1 15.5 30.5 35 11.7 200 - 250
18 x 30 03 0.8 55 ± 1 18.5 30.5 35 12.9 120 - -
18 x 38 04 0.8 34 ± 1 18.5 39.5 44 19.0 125 - -
21 x 38 05 0.8 34 ± 1 21.5 39.5 44 24.0 100 - -
Note
• For detailed tape dimensions refer to packaging information: www.vishay.com/doc?28361
AXIAL: FORM AA, BA, AND BR
Ø d I Ø D
max.Lmax.
MASS
F
min.
(g)
Vishay BCcomponents
PACKAGING QUANTITIES
FORM
AA
FORM
BA
FORM
BR
D
120 °C
(3 x)
D3
-
+ 0.1
1.3
Case Ø D x L = 15 mm x 30 mm to 21 mm x 38 mm
Especially for applications with severe shocks and vibrations
d2
(3 x)
0
Mounting holes
90° ± 2°
(3 x)
1.05
1.3
3.6
+ 0.2
+ 0.03
+ 0
- 0.05
- 0.2
- 0.1
L
(3 x)
(3 x)
Ø D2
Fig. 5 - Mounting hole diagram and outline; Form MR: With mounting ring and pins
Table 2
MOUNTING RING; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE
Ø d1 Ø d2 D
15 x 30 02 0.8 1.0 + 0.4 15.5 17.5 16.5 ± 0.2 33 11.7 200
18 x 30 03 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 33 12.9 240
18 x 38 04 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 42 19.0 100
21 x 38 05 0.8 1.0 + 0.4 21.5 22.5 21.5 ± 0.2 42 24.0 100
MOUNTING RING: FORM MR
max.
Ø D2
max.
D3 L
max.
MASS
(g)
Ø d1
PACKAGING
QUANTITIES
1
+ 1.0
- 0.5
Revision: 27-Mar-2020
3
Document Number: 28332
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Page 4
www.vishay.com
138 AML
Vishay BCcomponents
ELECTRICAL DATA
SYMBOL DESCRIPTION
C
I
I
L5
tan Max. dissipation factor at 100 Hz
ESR
Z Max. impedance at 10 kHz or 100 kHz
Note
• Unless otherwise specified, all electrical values in Table 3 apply
at T
Rated capacitance at 100 Hz, tolerance ± 20 %
R
Rated RMS ripple current at 100 Hz, 105 C
R
Max. leakage current after 5 min at U
Equivalent series resistance at 100 Hz
(calculated from tan
= 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
amb
max.
and CR)
R
ORDERING EXAMPLE
Electrolytic capacitor 138 series
470 μF / 10 V; ± 20 %
Nominal case size: Ø 8 mm x 18 mm; Form BA
Ordering code: MAL213834471E3
Former 12 NC: 2222 138 34471
Table 3
ELECTRICAL DATA AND ORDERING INFORMATION
NOMINAL
C
U
(V)
6.3
10
16
25
R
R
100 Hz
1000 10 x 18 430 17 0.24 0.380 0.300 0.240 - 23102E3 33102E3 -
2200 10 x 25 640 32 0.29 0.210 0.180 0.150 - 23222E3 33222E3 -
1000 10 x 25 520 24 0.2 0.320 0.200 0.160 - 24102E3 34102E3 -
1500 10 x 30 670 34 0.28 0.320 0.260 0.260 14152E3 24152E3 - -
2200 12.5 x 30 890 48 0.29 0.220 0.190 0.190 14222E3 24222E3 - -
3300 15 x 30 1140 70 0.30 0.160 0.130 0.150 14332E3 24332E3 - 44332E3
4700 18 x 30 1450 98 0.33 0.120 0.110 0.130 14472E3 - - 44472E3
6800 18 x 38 1880 140 0.34 0.085 0.074 0.110 14682E3 - - 44682E3
10 000 18 x 38 1980 200 0.41 0.070 0.062 0.100 14103E3 - - 44103E3
15 000 21 x 38 2200 300 0.55 0.063 0.058 0.099 14153E3 - - 44153E3
1000 10 x 30 630 36 0.20 0.340 0.270 0.260 15102E3 25102E3 - -
1500 12.5 x 30 860 52 0.20 0.230 0.190 0.190 15152E3 25152E3 - -
2200 15 x 30 1090 74 0.21 0.170 0.140 0.150 15222E3 25222E3 - 45222E3
3300 18 x 30 1420 110 0.24 0.120 0.100 0.130 15332E3 - - 45332E3
4700 18 x 30 1480 150 0.28 0.100 0.090 0.120 15472E3 - - 45472E3
6800 18 x 38 1930 220 0.28 0.072 0.062 0.100 15682E3 - - 45682E3
10 000 21 x 38 2100 320 0.38 0.065 0.057 0.098 15103E3 - - 45103E3
CASE SIZE
(μF)
100 6.3 x 12.7 99 5.3 0.24 3.800 3.000 1.800 - 23101E3 33101E3 -
220 7.7 x 12.7 160 6.8 0.24 1.700 1.400 0.950 - 23221E3 33221E3 -
470 6.5 x 18 250 9.9 0.24 0.810 0.640 0.500 - 23471E3 33471E3 -
150 7.7 x 12.7 140 7.0 0.2 2.100 1.300 0.950 - 24151E3 34151E3 -
220 6.5 x 18 190 8.4 0.2 1.400 0.910 0.500 - 24221E3 34221E3 -
470 8 x 18 300 13 0.2 0.680 0.430 0.350 - 24471E3 34471E3 -
22 6.3 x 12.7 58 4.7 0.12 8.700 7.300 2.700 - 25229E3 35229E3 -
47 6.3 x 12.7 83 5.5 0.16 5.400 3.400 1.900 - 25479E3 35479E3 -
100 7.7 x 12.7 130 7.2 0.16 2.500 1.600 1.000 - 25101E3 35101E3 -
220 8 x 18 230 11 0.16 1.200 0.730 0.350 - 25221E3 35221E3 -
470 10 x 18 360 19 0.16 0.540 0.340 0.250 - 25471E3 35471E3 -
10 6.3 x 12.7 46 4.5 0.09 14.000 12.000 2.800 - 26109E3 36109E3 -
22 6.3 x 12.7 61 5.1 0.14 10.000 5.500 2.500 - 26229E3 36229E3 -
47 7.7 x 12.7 96 6.4 0.14 4.700 2.600 1.000 - 26479E3 36479E3 -
Ø D x L
(mm)
I
R
100 Hz
105 °C
(mA)
I
L5
5 min
(μA)
tan
100 Hz
ESR
100 Hz
()
Z
10 kHz
()
Z
100 kHz
()
FORM AA
ORDERING CODE MAL2138.......
IN BOX
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING
RING
FORM MR
Revision: 27-Mar-2020
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
4
Document Number: 28332
Page 5
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
NOMINAL
C
U
(V)
25
40
50
63
100
R
R
100 Hz
1000 12.5 x 30 790 54 0.15 0.250 0.180 0.190 16102E3 26102E3 - 1500 15 x 30 1020 79 0.15 0.170 0.130 0.150 16152E3 26152E3 - 46152E3
2200 18 x 30 1320 110 0.17 0.130 0.100 0.130 16222E3 - - 46222E3
3300 18 x 38 1720 170 0.17 0.090 0.071 0.110 16332E3 - - 46332E3
4700 18 x 38 1840 240 0.21 0.076 0.063 0.100 16472E3 - - 46472E3
6800 21 x 38 2100 340 0.27 0.068 0.058 0.099 16682E3 - - 46682E3
1000 15 x 30 970 84 0.10 0.170 0.120 0.140 17102E3 27102E3 - 47102E3
1500 18 x 30 1250 120 0.12 0.130 0.098 0.120 17152E3 - - 47152E3
2200 18 x 38 1640 180 0.12 0.093 0.069 0.100 17222E3 - - 47222E3
3300 21 x 38 1810 270 0.15 0.079 0.061 0.100 17332E3 - - 47332E3
1000 18 x 38 1460 130 0.12 0.130 0.086 0.110 18102E3 - - 48102E3
1500 21 x 38 1680 190 0.13 0.100 0.072 0.110 18152E3 - - 48152E3
CASE SIZE
(μF)
100 6.5 x 18 160 9.0 0.13 2.100 1.200 0.550 - 26101E3 36101E3 220 10 x 18 270 15 0.13 0.940 0.550 0.270 - 26221E3 36221E3 470 10 x 25 440 28 0.13 0.440 0.260 0.170 - 26471E3 36471E3 680 10 x 30 580 38 0.14 0.360 0.260 0.250 16681E3 26681E3 - -
33 7.7 x 12.7 91 6.6 0.11 5.300 2.700 1.000 - 27339E3 37339E3 -
47 6.5 x 18 120 7.8 0.10 3.400 1.900 0.650 - 27479E3 37479E3 100 8 x 18 180 12 0.10 1.600 0.900 0.400 - 27101E3 37101E3 220 10 x 25 350 22 0.10 0.720 0.410 0.200 - 27221E3 37221E3 330 10 x 30 490 30 0.10 0.470 0.320 0.300 17331E3 27331E3 - 470 12.5 x 30 650 42 0.10 0.340 0.230 0.220 17471E3 27471E3 - 680 12.5 x 30 750 58 0.10 0.250 0.180 0.180 17681E3 27681E3 - -
10 6.3 x 12.7 51 5.0 0.09 14.00 7.000 2.700 - 21109E3 31109E3 -
22 7.7 x 12.7 82 6.2 0.09 6.500 3.200 1.100 - 21229E3 31229E3 100 10 x 18 230 14 0.08 1.300 0.700 0.300 - 21101E3 31101E3 -
4.7 6.3 x 12.7 35 4.6 0.09 30.00 17.000 5.000 - 28478E3 38478E3 10 7.7 x 12.7 59 5.3 0.08 13.00 8.000 1.800 - 28109E3 38109E3 22 6.5 x 18 100 6.8 0.07 5.100 3.600 0.850 - 28229E3 38229E3 47 8 x 18 150 9.9 0.07 2.400 1.700 0.500 - 28479E3 38479E3 -
100 10 x 25 280 17 0.07 1.100 0.800 0.270 - 28101E3 38101E3 150 10 x 30 410 23 0.11 0.730 0.440 0.400 18151E3 28151E3 - 220 12.5 x 30 560 32 0.11 0.500 0.310 0.290 18221E3 28221E3 - 330 12.5 x 30 660 46 0.12 0.370 0.230 0.220 18331E3 28331E3 - 470 15 x 30 860 63 0.12 0.260 0.160 0.160 18471E3 28471E3 - 48471E3
680 18 x 30 1130 90 0.12 0.190 0.120 0.140 18681E3 - - 48681E3
2.2 6.3 x 12.7 24 4.4 0.09 65.00 25.000 8.000 - 29228E3 39228E3 -
4.7 7.7 x 12.7 40 4.9 0.08 27.00 17.000 5.000 - 29478E3 39478E3 10 6.5 x 18 67 6.0 0.07 11.00 8.000 2.400 - 29109E3 39109E3 22 8 x 18 100 8.4 0.07 5.100 3.600 1.400 - 29229E3 39229E3 47 10 x 25 190 13 0.07 2.400 1.700 0.670 - 29479E3 39479E3 68 10 x 30 300 18 0.07 1.700 1.100 0.970 19689E3 29689E3 - -
100 12.5 x 30 410 24 0.07 1.100 0.770 0.670 19101E3 29101E3 - 150 15 x 30 550 34 0.07 0.780 0.520 0.460 19151E3 29151E3 - 49151E3
220 15 x 30 650 48 0.07 0.540 0.370 0.330 19221E3 29221E3 - 49221E3
330 18 x 30 880 70 0.08 0.380 0.270 0.240 19331E3 - - 49331E3
470 18 x 38 1130 98 0.08 0.270 0.190 0.170 19471E3 - - 49471E3
680 21 x 38 1330 140 0.09 0.210 0.140 0.140 19681E3 - - 49681E3
Ø D x L
(mm)
I
R
100 Hz
105 °C
(mA)
I
L5
5 min
(μA)
tan
100 Hz
ESR
100 Hz
()
Z
10 kHz
()
Z
100 kHz
()
IN BOX
FORM AA
Vishay BCcomponents
ORDERING CODE MAL2138.......
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
138 AML
MOUNTING
RING
FORM MR
Revision: 27-Mar-2020
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5
Document Number: 28332
Page 6
www.vishay.com
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS
Voltage
Surge voltage U
Reverse voltage U
Current
Leakage current
Inductance
Equivalent series inductance (ESL)
After 1 min at U
case Ø D x L = 6.3 mm x 12.7 mm and
7.7 mm x 12.7 mm
case Ø D x L = 6.5 mm x 18 mm to
21 mm x 38 mm
After 5 min at U
Case Ø D x L mm:
6.3 x 12.7 Typ. 20 nH -
7.7 x 12.7 Typ. 30 nH -
6.5 x 18 Typ. 15 nH -
8 x 18 Typ. 35 nH -
10 x 18 Typ. 69 nH -
10 x 25 Typ. 38 nH -
10 x 30 Typ. 38 nH -
12.5 x 30 Typ. 46 nH -
15 x 30 Typ. 48 nH Typ. 39 nH
18 x 30 Typ. 50 nH Typ. 39 nH
18 x 38 Typ. 54 nH Typ. 39 nH
21 x 38 Typ. 59 nH Typ. 39 nH
:
R
R
Vishay BCcomponents
AXIAL MOUNTING RING
s
I
0.02 CR x UR + 3 μA
L1
I
0.006 CR x UR + 4 μA
L1
IL5 0.002 CR x UR + 4 μA
VALUE
1.15 x U
1 V
rev
138 AML
R
CAPACITANCE (C)
2
1
1.1
C
C
0
1.0
0.9
0.8
0.7
0.6
Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm
C
0
4
3
2
Curve 1: 6.3 V and 10 V
Curve 2: 16 V and 40 V
1
- 60 - 40 - 20 0 20 40 60 80 100 120
= Typical at 20 °C, 100 Hz
Curve 3: 50 V and 63 V
Curve 4: 100 V
3
4
T
(°C)
amb
Fig. 6 - Typical multiplier of capacitance as a function of
ambient temperature
Revision: 27-Mar-2020
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1.2
C
C
0
1.1
1.0
0.9
0.8
0.7
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
C
= Typical at 20 °C, 100 Hz
0
2
1
- 60 - 40 - 20 0 20 40 60 80 100 120
Fig. 7 - Typical multiplier of capacitance as a function of
ambient temperature
6
Document Number: 28332
Curve 1: 10 V
Curve 2: 100 V
T
amb
1
2
(°C)
Page 7
www.vishay.com
1
10
0 50 100- 50
ESR
0
ESR
10
2
10
-1
Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm
ESR
0
= Typical ESR at 20 °C, 100 Hz
2
1
2
1
T
amb
(°C)
Curve 1: 50 V
Curve 2: 6.3 V; 63 V; 100 V
- 60 - 40 - 20 0 20 40 60 80 100 120
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
ESR
0
= Typical ESR at 20 °C, 100 Hz
T
amb
(°C)
1
10
10
- 1
ESR
0
ESR
EQUIVALENT SERIES RESISTANCE (ESR)
1.2
C
C
0
1.0
138 AML
Vishay BCcomponents
0.8
0.6
0.4
2
1
Curve 1: 10 V
Curve 2: 100 V
0.2
2
10
10
C0 = Typical at 20 °C, 100 Hz
3
10
4
10
f (Hz)
5
10
Fig. 8 - Typical multiplier of capacitance as a function of frequency Fig. 9 - Typical multiplier of ESR as a function of
ambient temperature
2
Curve 1: 6.3 V
Curve 2: 100 V
1
ESR
ESR
2
0
1
1
Fig. 10 - Typical multiplier of ESR as a function of
ambient temperature
Revision: 27-Mar-2020
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
For technical questions, contact: [email protected]
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
2
0
2
10
10
3
10
Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm
= Typical at 20 °C, 100 Hz
ESR
0
4
10
f (Hz)
5
10
Fig. 11 - Typical multiplier ESR as a function of frequency
7
Document Number: 28332
Page 8
www.vishay.com
10
-2
10
1
10
-1
Z
0
Z
- 60 - 40 - 20 0 20 40 60 80 100 120
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
T
amb
(°C)
10
6
10
5
10
4
10
3
10
2
f (Hz)
Case Ø D x L = 6.3 mm x 12.7 mm to 6.5 mm x 18 mm
T
amb
(°C)
10
3
10
2
10
1
10
-1
Z
( )
Ω
3
4
5
6
7
8
1
2
Curve 1: 10 µF, 63 V
Curve 2: 10 µF, 50 V
Curve 3: 22 µF, 63 V
Curve 4: 47 µF, 25 V
Curve 5: 100 µF, 16 V
Curve 6: 100 µF, 25 V
Curve 7: 220 µF, 10 V
Curve 8: 470 µF, 6.3 V
EQUIVALENT SERIES RESISTANCE (ESR)
2
ESR
ESR
0
1
2
1
138 AML
Vishay BCcomponents
Curve 1: 10 V
Curve 2: 100 V
1
2
0
10
Case Ø D x L = 10 x 30 to 21 x 38 mm
ESR
= typical ESR at 20 °C, 100 Hz
0
2
10
3
10
4
10
f (Hz)
5
10
Fig. 12 - Typical multiplier ESR as a function of frequency
IMPEDANCE (Z)
Table 4
IMPEDANCE VS. CAPACITANCE VALUES (Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm)
T
amb
6.3 V 10 V 16 V 25 V 40 V 50 V 63 V 100 V
+20 °C 300 200 160 120 90 70 80 80
-25 °C 2000 1200 750 560 450 300 550 550
-40 °C 5500 3200 2000 1500 1200 900 1500 1500
Z x CR ( x μF) AT 10 kHz
Revision: 27-Mar-2020
Fig. 13 - Typical multiplier of ESR as a function of
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ambient temperature at 10 kHz
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical questions, contact: [email protected]
Fig. 14 - Typical impedance as a function of frequency
8
Document Number: 28332
Page 9
www.vishay.com
10
5
10
4
10
3
10
2
10
f (Hz)
Case Ø D x L = 8 mm x 18 mm to 10 mm x 25 mm
T
amb
(°C)
10
3
10
2
10
1
10
-1
Z
( )
Ω
1
2
3
4
7
5
6
8
Curve 1: 47 µF, 63 V
Curve 2: 100 µF, 50 V
Curve 3: 100 µF, 63 V
Curve 4: 220 µF, 25 V
Curve 5: 470 µF, 16 V
Curve 6: 1000 µF, 25 V
Curve 7: 1000 µF, 10 V
Curve 8: 2200 µF, 6.3 V
10
6
10
5
10
4
10
3
10
2
f (Hz)
10
2
10
-2
10
1
10
-1
Z
( )
Ω
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
T
amb
(°C)
2
3
1
Curve 1: 680 µF; 25 V
Curve 2: 4700 µF; 25 V
Curve 3: 6800 µF; 25 V
10
6
10
5
10
4
10
3
10
2
f (Hz)
10
2
10
-2
10
1
10
-1
Z
( )
Ω
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
T
amb
(40 °C)
1
2
3
Curve 1: 680 µF; 25 V
Curve 2: 4700 µF; 25 V
Curve 3: 6800 µF; 25 V
138 AML
Vishay BCcomponents
2
10
( )
Z
Ω
10
1
Curve 1: 680 µF; 25 V
Curve 2: 4700 µF; 25 V
Curve 3: 6800 µF; 25 V
-1
10
-2
10
2
10
3
10
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
1
2
3
4
10
5
10
f (Hz)
T
amb
Fig. 15 - Typical impedance as a function of frequency Fig. 16 - Typical impedance as a function of frequency
(°C)
6
10
Fig. 17 - Typical impedance as a function of frequency Fig. 18 - Typical impedance as a function of frequency
Revision: 27-Mar-2020
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical questions, contact: [email protected]
9
Document Number: 28332
Page 10
www.vishay.com
RIPPLE CURRENT AND USEFUL LIFE
Table 5
ENDURANCE TEST DURATION AND USEFUL LIFE
NOMINAL CASE SIZE
Ø D x L
(mm)
6.3 x 12.7 1000 2000
7.7 x 12.7 1000 2000
6.5 x 18 1000 2000
8 x 18 1000 2000
10 x 18 1000 2000
10 x 25 1000 2000
10 x 30 5000 10 000
12.5 x 30 5000 10 000
15 x 30 5000 10 000
18 x 30 5000 10 000
18 x 38 5000 10 000
21 x 38 5000 10 000
Note
• Multiplier of useful life code: CCC206
ENDURANCE
AT 105 °C
(h)
138 AML
Vishay BCcomponents
USEFUL LIFE
AT 105 °C
(h)
IA = Actual ripple current at 100 Hz
= Rated ripple current at 100 Hz, 105 °C
I
R
(1)
Useful life at 105 °C and IR applied:
Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm: 2000 h
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm: 10 000 h
3.8
3.7
I
A
I
R
3.6
3.5
3.4
3.3
3.2
3.1
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
200
150
100
60
1.2
1.0
0.8
0.5
0.0
40 50 60 70 80 90 100 110
8.0
12
20
30
6.0
4.0
3.0
1.0
1.5
2.0
Lifetime multiplier
CCC206
(1)
T
(°C)
amb
Fig. 19 - Multiplier of useful life as a function of ambient temperature and ripple current load
Revision: 27-Mar-2020
10
Document Number: 28332
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Page 11
138 AML
www.vishay.com
Table 6
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
U
(V)
R
50 100 300 1000 3000 10 000
6.3 0.95 1.00 1.07 1.12 1.15 1.20
10 0.95 1.00 1.07 1.12 1.15 1.20
16 0.90 1.00 1.12 1.20 1.25 1.30
25 0.90 1.00 1.12 1.20 1.25 1.30
40 0.85 1.00 1.20 1.30 1.35 1.40
50 0.85 1.00 1.20 1.30 1.35 1.40
63 0.85 1.00 1.20 1.30 1.35 1.40
100 0.85 1.00 1.20 1.30 1.35 1.40
Table 7
FREQUENCY (Hz)
I
MULTIPLIER
R
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST REFERENCE
= 105 °C; UR applied;
T
amb
Case Ø D x L:
6.3 mm x 12.7 mm to 10 mm x 25 mm: 1000 h;
10 mm x 30 mm to 21 mm x 38 mm: 5000 h
= 105 °C; UR and IR applied;
T
amb
Case Ø D x L:
6.3 mm x 12.7 mm to 10 mm x 25 mm: 2000 h;
Endurance
Useful life
IEC 60384-4 /
EN130 300
subclause 4.13
CECC 30 301
subclause 1.8.1
10 mm x 30 mm to 21 mm x 38 mm: 10 000 h
= 105 °C; no voltage applied;
T
Shelf life
(storage at
high temperature)
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
IEC 60384-4 /
EN130 300,
subclause 4.17
amb
500 h
After test: U
24 h to 48 h before measurement
Revision: 27-Mar-2020
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PROCEDURE
(quick reference)
to be applied for 30 min,
R
11
Vishay BCcomponents
REQUIREMENTS
6.3 V; C/C: +15 % / -30 %
U
R
6.3 V; C/C: ± 15 %
U
R
tan 1.3 x spec. limit
Z 2 x spec. limit
spec. limit
I
L5
6.3 V; C/C: +45 % / -50 %
U
R
6.3 V; C/C: ± 45 %
U
R
tan 3 x spec. limit
Z 3 x spec. limit
spec. limit
I
L5
no short open circuit
total failure percentage: 1 %
C/C, tan , Z:
for requirements
see “Endurance test” above
2 x spec. limit
I
L5
Document Number: 28332
Page 12
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000
Loading...