Page 1
68
SAFETY INSULATED PLIERS
Insulated and piece-checked in accordance with specification
EN 60.900 of the Association of German Electrical
Engineers (VDE). Permissable voltage at which the safety
pliers can be used: 1000 V a.c. or 1500 V d.c.
Two-colour multilayered insulation, outside red - inside yellow.
Damages of the external red insulation immediately
become visible by the yellow layer below.
The advantage: simple safety control, practical at any time
No.
Length
Finish
Weight
mm inches g
Side cutters
special steel, cutting capacity: 13-106 VDE for steel wire up to 1.6 mm Ø
13-108 VDE for steel wire up to 2.0 mm Ø
13-106 VDE 165 6 1/4 chrome-plated, polished, 200
with VDE safety insulation
13-108 VDE 195 7 3/4 chrome-plated, polished, 300
with VDE safety insulation
Telephone pliers
snipe nose, long, straight jaws, with cutting edge for hard wire
up to 1.6 mm Ø, serrated jaws, special steel
13-207 VDE 205 8 chrome-plated, polished, 230
with VDE safety insulation
Telephone pliers
snipe nose, long, bent jaws, with cutting edge for hard wire
up to 1.6 mm Ø, serrated jaws, special steel
13-208 VDE 205 8 chrome-plated, polished, 230
with VDE safety insulation
Round nose pliers
with long, round, serrated jaws
13-506 VDE 165 6 1/2 chrome-plated, polished, 200
with safety insulation
Flat nose pliers
with long, flat, serrated jaws
13-516 VDE 165 6 1/2 chrome-plated, polished, 210
with safety insulation
Combination pliers
with wire cutter, for hard wire up to 1.6 mm Ø
13-707 VDE 190 7 1/2 chrome-plated, polished, 210
with VDE safety insulation
13-708 VDE 210 8 1/4 chrome-plated, polished, 340
with VDE safety insulation
Wire strippers
with adjusting screw
13-806 VDE 165 6 1/2 chrome-plated, polished, 210
with VDE safety insulation
1000 V
13-506 VDE
13-516 VDE
13-707 VDE
13-806 VDE
13-207 VDE
13-106 VDE
Loading...