Datasheet 12149A, 12147A Specification

Download

Page 1

APEM www.apem.com A-71

12000 series

Professional toggle switches - threaded bushing ø 11.9 (15/32)

Specifications

MATERIALS

• Case : diallylphthalate (DAP)

• Actuator : brass, chrome plated

• Bushing : brass, nickel plated

• Housing : brass, nickel plated

• Contacts

A : silver AD2 : gold plated silver

(2 microns gold) X780 : solid rivet - gold plated silver/nickel alloy

D : solid gold rivet X910 : silver/nickel alloy (for

peak currents, see “Special options”)

• Terminal seal : epoxy Note : AD2 and X780 contacts

can be used for high level applications. In this case, the gold layer is considered only as a protection against oxidation during storage. Tin dipped terminals available, see "Special options".

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load : Peak currents, refer to “Special options”.

- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC

- gold contacts (D) : 200mA 250VAC - 400mA 125VAC

• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.

• Initial contact resistance : 10 mΩ max.

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength :

1.000 Vrms 50 Hz min. between terminals

2.000 Vrms 50 Hz min. between poles and between terminals and frame

• Contact bounce : 2 ms max.

• Electrical life at full load :

Contacts Max. current/voltage rating 2 positions 3 positions

A 2A 250VAC - 4A 125VAC - 4A 30VDC 50.000 50.000 AD2 2A 250VAC - 4A 125 VAC - 4A 30VDC 20.000 20.000

X780 (Gold plating : 100mA 30VDC max.) D 200mA 250VAC - 400mA 125VAC 80.000 50.000

Low level or mechanical life 150.000 100.000

GENERAL SPECIFICATIONS

• Torque :1,50 Nm (1.10 Ft.lb) max. applied between the 2 nuts

• Standard panel thickness : 4,5 mm (.177) max.

• Operating temperature : -40°C to +85°C

RELIABILITY - RUN-IN TEST

Upon request, each individual switch can be submitted to a low level run-in test of 50 or 250 cycles to ensure suitability for special applications requiring a very high level of reliability (military, space, etc.).

Number of cycles

AGENCY APPROVALS/PREFERENTIAL LISTS

QPL (Europe only) MUAHAG Designed to MIL specifications

Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete appropriate box of

ordering format. Preferential lists do not appear on the switches.

CECC 96201-005 CECC 96201-008

Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.

Packaging unit : 2 pole models : 25 pieces - 3 & 4 pole models : 20 pieces.

Page 2

A-72 APEM www.apem.com

12000 series

Professional toggle switches - threaded bushing ø 11.9 (15/32)

Overview

SERIES

Terminals and bushings

1 Solder lug terminals 2 Straight PC terminals

All models with threaded bushing Ø 11,9 (15/32). Bushing Ø 15 (.590), see X822 under "Special options".

Number of poles

4 Double pole 5 Three pole 6 Four pole

Electrical functions

6 ON - ON 9 ON OFF ON 7 MOM OFF MOM 8 ON OFF MOM 5 - ON MOM

4 ON ON ON

ON ON MOM ▲ MOM ON MOM ▲

Function 4

▲

Must not have blank

in "momentary" box.

Momentary for

function 4

1R ON ON MOM 2R MOM ON MOM

Leave blank for other functions.

Finish

Blank Bright chrome finish G Matt black finish on

bushing, actuator and hardware.

Satin chrome finish, see "Special options".

Fluorescent tip

Blank None

0.38 White fluorescent

tip to lever

Available with matt black finish (G) only.

Special options

Blank No special

requirement

X408 Front panel sealing

by two O-rings

X822 Bushing Ø 15 (.590) Other : see foll. pages.

Contact materials

A Silver AD2 Silver, gold plated

(2 micron gold))

D Solid gold rivet See "Special options" for

X780 (solid silver/nickel rivet) and X910 (for peak currents).

Sealing

Blank Epoxy sealed

terminals standard

K Front panel sealing by

one O-ring and sealing washer

Sealing by two O-rings, see X408, "Special options" box

Levers

-13 Standard lever

-12 Short lever

Approvals

CECC

Availability : Consult factory for details of approved models.

Locking levers

-1V 1 locked position

-2V 2 locked positions

-3V 3 locked positions

Other, consult factory.

ABOUT THIS SERIES

On the following pages, you will find successively :

- model structure of switches

- options in the same order as in above chart

NOTICE : please note that not all combinations of above numbers are available.

Refer to the following pages for further information.

Sealing boots are available to protect the switches against dust and water. They are presented in section H.

Mounting accessories : standard hardware supplied with all models : 2 hex nuts 14 (.551) across flats and 1 locking ring.

Standard and special hardware available are presented in section I. Security caps are available to prevent inadvertent lever operation. They are presented in section I.

Page 3

APEM www.apem.com A-73

12000 series

Professional toggle switches - threaded bushing ø 11.9 (15/32)

Solder lug terminals : 12100

Solder lug terminals - four pole

Solder lug terminals - three pole

Solder lug terminals - double pole

MODEL STRUCTURE

Function 6 Other functions

• Epoxy sealed terminals standard

I II III

12146 ON - ON 12149 ON OFF ON 12147 MOM OFF MOM 12148 ON OFF MOM 12144* ON ON ON 12144 1R* ON ON MOM 12144 2R* MOM ON MOM 12145 - ON MOM

I II III

12156 ON - ON 12159 ON OFF ON 12157 MOM OFF MOM 12158 ON OFF MOM

* Function 4 : SP in DP case - connections, see end of catalogue.

I II III

12166 ON - ON 12169 ON OFF ON 12167 MOM OFF MOM 12168 ON OFF MOM 12164* ON ON ON 12164 1R* ON ON MOM 12164 2R* MOM ON MOM

* Function 4 : DP in 4P case - connections, see end of catalogue.

Shown with standard lever (-13)

➞

Keyway

➞

Keyway

➞

Keyway

➞

Keyway

1 2 3 1 2 3

(.098)

(.047)

(.066)

(.196)

1.70

5.00

1.20

2.50

(.374)

(.039)

9.50

1.00

Function 6

Typical angle of throw (A)

24°

Functions 9, 7, 8, 4 20°

Function 5 12°

1 2

Ø11.90-32UNS

(15/32-32UNS)

10.90 13.70

17.30 (.681)

4 5

III

Ø6.00

(.236 DIA)

1.00

(.039)

(.539)(.429)

5.00

(.196)

0.50 (.019)

4.00 (.157)

2.50 (.098)

EPOXY

Ø18.20

(.716 DIA)

6.00 (.236)

14.00

(.551)

4 5 6

17.30 (.681)

III

13.7010.90

(.429) (.539)

3 21

1.00

(.039)

0.50 (.019)

4.00 (.157)

4.00

2.50

(.157)

(.098)

EPOXY

6.00 (.236)

Ø11.90-32UNS

(15/32-32UNS)

10 11 12

Ø6.00

(.236 DIA)

III

5.00

(.196)

10.90 13.70

17.30 (.681)

1.00

(.039)

(.539)(.429)

3 21

0.50 (.019)

Ø11.90-32UNS

(15/32-32UNS)

Ø6.00

(.236 DIA)

5.00

(.196)

2.50 (.098)

EPOXY

6.00 (.236)

20.00 (.787)

Ø18.20

(.716 DIA)

26.00

(1.02

Ø18.20

(.716 DIA)

14.00

(.551)

14.00

(.551)

Page 4

A-74 APEM www.apem.com

12000 series

Professional toggle switches - threaded bushing ø 11.9 (15/32)

Straight PC terminals : 12200

Straight PC terminals - four pole ▲

Straight PC terminals - three pole ▲

Straight PC terminals - double pole ▲

PANEL CUT-OUT

With K With X408

Standard sealing option sealing option

I II III

12246 ON - ON

I II III

12256 ON - ON

I II III

12266 ON - ON

➞

Keyway

➞

Keyway

➞

Keyway

▲ Models with straight PC terminals are also available with 3,5 mm (.138) short

terminals, functions 6, 9, 7 and 8. On request.

1 2

17.30 (.681)

4 5

III

13.7010.90

(.429) (.539)

1.00

(.039)

0.50 (.019)

4.00 (.157)

Ø18.20

(.716 DIA)

14.00

(.551)

4 5 6

Ø11.90-32UNS

32UNS

Ø11.90-

(15/32-32UNS)

10 11 12

Ø1.60

EPOXY

6.00

(.236)

EPOXY

6.00 (.236)

(.062 DIA)

20.00

(.787)

Ø18.20

(.716 DIA)

Ø1.60

(.062 DIA)

26.00

(1.023)

Ø18.20

(.716 DIA)

Ø1.60

(.062 DIA)

(.157)

6.00

4.00

(.157)

6.00

4.00

14.00

(.236)

14.00

(.236)

(.551)

1.00

(.039)

(15/32-32UNS)

Ø6.00

(.236 DIA)

17.30 (.429) (.539)

(.681)

III

1.00

(.039)

Ø6.00

(.236 DIA)

17.30 (.429) (.539)

(.681)

III

1.00

(.039)

13.7010.90

123

13.7010.90

3 21

(.374)

0.50 (.019)

9.50

(.374)

0.50 (.019)

9.50

4.00

1.00

(.157)

(.039)

(.157)

(.039)

Ø12.50

(.492 DIA)

(.137 DIA)

9.60

(.377)

Ø3.50

Ø12.00

(.472 DIA)

5.10

(.200)

1.70

(.066)

Ø12.00

(.472 DIA)

5.10

(.200)

6.00 (.236)

Ø11.90-32UNS

(15/32-32UNS)

Ø6.00

(.236 DIA)

9.50

(.374)

6.00 (.236)

EPOXY

4.00

(.157)

Page 5

APEM www.apem.com A-75

12000 series

Professional toggle switches - threaded bushing ø 11.9 (15/32)

Epoxy sealed terminals are standard.

Blank No sealing except standard.

K Front panel sealing by one O-ring and sealing washer.

Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated.

Sealing by two O-rings, see X408 under "Special options". Sealing boots : see section H.

CONTACT MATERIALS

A Silver AD2 Silver, gold plated (2 micron gold) D Solid gold rivet (except functions 4 and 5)

See "Special options" for contacts X780 (solid silver/nickel rivet) and contacts X910 (for peak currents).

FINISH

Blank Bright chrome finish G Matt black finish on bushing, lever and hardware.

For satin chrome finish, see "Special options".

SEALING

FLUORESCENT TIP

Blank None

0.38 White fluorescent tip.

Becomes luminous when submitted to ultra-violet rays.

Standard lever Locking lever

Available with matt black finish (option G) only.

➀ O-ring ➁ Sealing washer

(.118)

3.00

4 Maxi

(.157 max)

Page 6

A-76 APEM www.apem.com

12000 series

Professional toggle switches - threaded bushing ø 11.9 (15/32)

ACTUATORS

Levers

Locking levers

-13

Standard

-12

Short lever

-1V

1 locked position (function 6) Typical angle of throw : 26°

Consult factory for other locking lever options.

-2V

2 locked positions (function 6) Typical angle of throw : 26°

-3V

3 locked positions (functions 9 and 4) Typical angle of throw : 20°

SPECIAL OPTIONS

Blank No special requirement.

X408 Front panel sealing by two O-rings. Flatted bushing for precise

orientation. Panel thickness : 8 mm (.314) max., 3 mm (.118) min. Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated.

X545 Lever, bushing, housing, nuts and washers with satin chrome finish.

Dash compulsory before lever code.

Security caps : see section I.

➞

Keyway

➀ O-rings

➞

Flat

11.90

(.468) (.681)

(.236 DIA)

17.30

Ø6.00

(.468)

11.90

(.275 DIA)

Ø7.00

(.763)

19.40

Ø7.00

(.275 DIA)

11.90

(.468)

19.40

(.763)

(.468)

11.90

(.811)

20.60

(.275)

Ø7.00

(.468) (.464)

(.196 DIA)

Ø5.00

11.8011.90

10.40

(.409)

Page 7

(.409)

10.40

(.590 DIA X 100 IS) (.500)

(.255 Max)

6.5 Maxi

Ø15 X 100 SI 12.70

(.511)

13.00

Ø15.20

(.598 DIA)

APEM www.apem.com A-77

12000 series

Professional toggle switches - threaded bushing ø 11.9 (15/32)

AGENCY APPROVAL

X822 Threaded bushing Ø 15 (.590), with double flat

Not available with function 5 or locking levers. Includes front panel sealing and X780 contact material.

X780 Solid rivet - gold plated silver/nickel alloy contacts

Not available with function 5.

SPECIAL OPTIONS (continued)

CECC 96201-005 (high level - contacts X780) CECC 96201-008 (low level - contacts AD2 or D)

Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete above box with ”CECC”.

Blank : no agency approval required. Preferential lists : see specifications.

➞

Flat

➀ O-rings

X822

CECC

X910 Switches for peak currents

Peak current up to 80A (1 ms) 60VDC - double pole

12146 X910 ON - ON

• Contacts : solid rivet - silver/nickel alloy (AgNi)

• Max. current/voltage rating : 3/80A (1 ms) 60VDC - 10.000 cycles 2/30A 250VAC - 10.000 cycles

• Further specifications and dimensions : see previous pages

• General information on peak currents : see end of catalogue.