Page 1
6121 Baker Road,
Suite 108
Minnetonka, MN 55345
www.chtechnology.com
Phone (952) 933-6190
Fax (952) 933-6223
1-800-274-4284
Thank you for downloading this document from C&H Technology, Inc.
Please contact the C&H Technology team for the following questions -
Technical
Application
Assembly
Availability
Pricing
Phone – 1-800-274-4284
E-Mail – [email protected]
www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.com
Page 2
10ETS..SPbF High Voltage Series
Vishay High Power Products
Input Rectifier Diode, 10 A
Base cathode
2
DESCRIPTION/FEATURES
The 10ETS..SPbF rectifier series has been
optimized for very low forward voltage drop, with
moderate leakage. The glass passivation
technology used has reliable operation up to
150 °C junction temperature.
Typical applications are in input rectification and these
D2PAK
1 3
Anode Anode
products are designed to be used with Vishay HPP switches
PRODUCT SUMMARY
VF at 10 A < 1 V
I
FSM
V
RRM
200 A
800/1200 V
and output rectifiers which are available in identical package
outlines.
This product series has been designed and qualified for
industrial level and lead (Pb)-free.
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE UNITS
Capacitive input filter T
common heatsink of 1 °C/W
= 55 °C, TJ = 125 °C
A
12.0 16.0 A
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
F(AV)
V
RRM
I
FSM
V
F
T
J
Sinusoidal waveform 10 A
800/1200 V
200 A
10 A, TJ = 25 °C 1.1 V
- 40 to 150 °C
Available
RoHS*
COMPLIANT
VOLTAGE RATINGS
, MAXIMUM PEAK
V
RRM
PART NUMBER
10ETS08SPbF 800 900
10ETS12SPbF 1200 1300
REVERSE VOLTAGE
V
V
, MAXIMUM NON-REPETITIVE
RSM
PEAK REVERSE VOLTAGE
V
I
RRM
AT 150 °C
mA
0.5
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current I
Maximum peak one cycle
non-repetitive surge current
2
Maximum I
Maximum I
* Pb containing terminations are not RoHS compliant, exemptions may apply
t for fusing I2t
2
√t for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 1450 A2√s
F(AV)
I
FSM
TC = 105 °C, 180° conduction half sine wave 10
10 ms sine pulse, rated V
10 ms sine pulse, no voltage reapplied 200
10 ms sine pulse, rated V
10 ms sine pulse, no voltage reapplied 145
applied 170
RRM
applied 130
RRM
A
2
A
s
www.vishay.com
Page 3
10ETS..SPbF High Voltage Series
Vishay High Power Products
Input Rectifier Diode, 10 A
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop V
Forward slope resistance r
Threshold voltage V
Maximum reverse leakage current I
F(TO)
RM
FM
10 A, TJ = 25 °C 1.1 V
t
TJ = 150 °C
TJ = 25 °C
T
= 150 °C 0.50
J
V
= Rated V
R
RRM
20 mΩ
0.82 V
0.05
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and storage temperature range T
Maximum thermal resistance,
junction to case
Maximum thermal resistance,
junction to ambient (PCB mount)
Soldering temperature T
Approximate weight
Marking device Case style D
Note
(1)
When mounted on 1" square (650 mm2) PCB of FR-4 or G-10 material 4 oz. (140 µm) copper 40 °C/W
For recommended footprint and soldering techniques refer to application note #AN-994
, T
J
Stg
DC operation 2.5
R
thJC
(1)
62
R
thJA
S
2
PAK (SMD-220)
- 40 to 150 °C
240 °C
2g
0.07 oz.
10ETS08S
10ETS12S
mA
°C/W
www.vishay.com For technical questions, contact: [email protected]
Document Number: 94338
2 Revision: 06-Jun-08
Page 4
10ETS..SPbF High Voltage Series
150
140
130
120
110
100
Maximum Allowable
Case Temperature (°C)
90
80
0
246810
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
150
140
130
120
110
Maximum Allowable
Case Temperature (°C)
100
90
30°
02468
Average Forward Current (A)
Fig. 2 - Current Rating Characteristics
10ETS.. Series
R
thJC
30°
10ETS.. Series
R
thJC
60°
90°
(DC) = 2.5 °C/W
Conduction angle
60°
90°
(DC) = 2.5 °C/W
Conduction period
120°
180°
Input Rectifier Diode, 10 A
Ø
Maximum Average
120°
180°
12
Ø
Peak Half Sine Wave
DC
16141210
18
Vishay High Power Products
20
18
16
14
12
10
Forward Power Loss (W)
200
180
160
140
120
100
80
Forward Current (A)
60
40
DC
180°
120°
90°
60°
30°
RMS limit
8
6
4
2
0
2468 1210 14
0
Ø
Conduction period
10ETS.. Series
= 150 °C
T
J
Average Forward Current (A)
Fig. 4 - Forward Power Loss Characteristics
At any rated load condition and with
rated V
10ETS.. Series
1
applied following surge.
RRM
Initial TJ = 150 °C
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
10
Number of Equal Amplitude
Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
16
100
16
14
12
10
Maximum Average
Forward Power Loss (W)
180°
120°
90°
60°
30°
8
6
4
2
0
0
Average Forward Current (A)
Fig. 3 - Forward Power Loss Characteristics
RMS limit
Ø
Conduction angle
10ETS.. Series
T
= 150 °C
J
108642
240
220
200
180
160
140
120
100
Forward Current (A)
Peak Half Sine Wave
80
60
40
Maximum non-repetitive surge current
10ETS.. Series
versus pulse train duration.
No voltage reapplied
Rated V
0.1 1.00.01
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
Initial TJ = 150 °C
reapplied
RRM
Document Number: 94338 For technical questions, contact: [email protected]
www.vishay.com
Revision: 06-Jun-08 3
Page 5
10ETS..SPbF High Voltage Series
Vishay High Power Products
Instantaneous Forward Current (A)
10
Input Rectifier Diode, 10 A
100
TJ = 25 °C
TJ = 150 °C
10
10ETS.. Series
1
0
0.5 1.0 1.5 2.0 2.5
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
3.0
Steady state value
(DC operation)
1
- Transient
thJC
Z
Single pulse
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
Thermal Impedance (°C/W)
0.1
0.0001 0.001 0.01 0.1 1
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance Z
Characteristics
thJC
10ETS.. Series
10
www.vishay.com For technical questions, contact: [email protected]
Document Number: 94338
4 Revision: 06-Jun-08
Page 6
10ETS..SPbF High Voltage Series
ORDERING INFORMATION TABLE
Device code
10 E T S 12 S TRL PbF
1 - Current rating (10 = 10 A)
2 - Circuit configuration
- Package
3
4 - Type of silicon
5 - Voltage code x 100 = V
6 - S = TO-220 D2PAK (SMD-220) version
7 - None = Tube
8
- None = Standard production
Input Rectifier Diode, 10 A
51324678
E = Single diode
T = TO-220AC
S = Standard recovery rectifier
RRM
TRL = Tape and reel (left oriented)
TRR = Tape and reel (right oriented)
PbF = Lead (Pb)-free
Vishay High Power Products
08 = 800 V
12 = 1200 V
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95046
Part marking information http://www.vishay.com/doc?95054
Packaging information http://www.vishay.com/doc?95032
www.vishay.com
Page 7
Legal Disclaimer Notice
Vishay
Notice
The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of
International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the
products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below.
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or
anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
International Rectifier
are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product
names noted herein may be trademarks of their respective owners.
®
, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN
®
Document Number: 99901 www.vishay.com
Revision: 12-Mar-07 1
Loading...