Datasheet 100313SCX, 100313SC, 100313QIX, 100313QI, 100313QCX Datasheet (Fairchild Semiconductor)

...

Page 1

September 1989 Revised August 2000

100313 Low Power Quad Driver

General Description

The 100313 is a mon olithic quad driver with two OR and two NOR outputs and com mon e nable. T he commo n inp ut is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50

Ω lines. All

inputs have 50 k

Ω pull-down resistors and all outputs are

buffered.

Features

■ 50% power reduction of the 100113

■ 2000V ESD protection

■ Pin/function compatible with 100113 and 100112

■ Voltage compensated operating range

= −4.2V to −5.7V

■ Available to industrial grade temperature range (PLCC package only)

Ordering Code:

Devices also availab le in Tape and Reel. Specify by appending th e s uffix let t er “X” to the ordering code.

Logic Symbol

Pin Descriptions

Connection Diagrams

24-Pin DIP/SOIC

28-Pin PLCC

Order Number Package Number Package Description

100313SC M24B 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 100313PC N24E 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 100313QC V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 100313QI V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square

Industrial Temperature Range (

−40°C to +85°C)

Pin Names Description

a–Dd

Data Inputs E Enable Input O

na–Ond

Data Outputs O

na–Ond

Complementary Data Outputs

Page 2

www.fairchildsemi.com 2

100313

Truth Table

H = HIGH Voltage Level L = LOW Voltage Level X = Don’t Care

Inputs Outputs

DbDcDdO1a, 02aO1a, O2aO1b, 02bO1b, 02bO1c, 02cO1c, 02cO1d, 02dO1d, 0

HXXXXH L H LHLHL LLLLL L H L H L H L H LLLLH L H L H L H H L LLLHL L H L H H L L H LLLHHL H LHHLHL LLHLL L H H L L H L H LLHLH L H H L L H H L LLHHL L H H L H L L H LLHHHL H H LHLHL LHLLLH L L HLHLH LHLLH H L L H L H H L LHLHL H L L H H L L H LHLHH H L L H H L H L LHHLL H L H L L H L H LHHLH H L H L L H H L LHHHL H L H L H L L H LHHHHH L H LHLHL

Page 3

3 www.fairchildsemi.com

100313

Absolute Maximum Ratings(Note 1) Recommended Operating

Conditions

Note 1: The “Absolute Maximum Ratings” are those value s beyond which

the safety of the dev ice cannot b e guaranteed . The device sh ould not be operated at these limit s. The parametric values defi ned in the Electrical Characteristics tables are not gu aranteed at the absolute m ax i m um ratings. The “Recomm ended O peratin g Cond itions ” table will defin e the condition s for actual device operation.

Note 2: ESD testing conforms to MIL-STD-883, Method 3015.

Commercial Version DC Electrical Characteristics

(Note 3)

= −4.2V to −5.7V, VCC = V

CCA

= GND, T

= 0°C to +85°C

Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasin g the al l owable syste m opera ti ng ran ge s. Cond it i ons fo r t estin g sho w n in the tabl es are chosen to guarantee operation under “worst case” conditions.

DIP AC Electrical Characteristics

= −4.2V to −5.7V, VCC = V

CCA

= GND

Note 4: The propagation delay s pec ified is for single output swit c hing. Delays may vary up to 150 ps with multiple outpu ts s witching.

Storage Temperature (T

STG

) −65°C to +150°C

Maximum Junction Temperature (T

) +150°C

Pin Potential to Ground Pin −7.0V to +0.5V

Input Voltage (DC) V

to +0.5V

Output Current (DC Output HIGH)

−50 mA

ESD (Note 2)

≥2000V

Case Temperature (T

)

Commercial 0

°C to +85°C

Industrial

−40°C to +85°C

Supply Voltage (V

) −5.7V to −4.2V

Symbol Parameter Min Typ Max Units Conditions

Output HIGH Voltage −1025 −955 −870

VIN =V

IH (Max)

Loading with

Output LOW Voltage −1830 −1705 −1620 or V

IL (Min)

50Ω to −2.0V

OHC

Output HIGH Voltage −1035

VIN = V

IH (Min)

Loading with

OLC

Output LOW Voltage −1610 or V

IL (Max)

50Ω to −2.0V

Input HIGH Voltage −1165 −870 mV Guaranteed HIGH Signal

for All Inputs

Input LOW Voltage −1830 −1475 mV Guaranteed LOW Signal

for All Inputs

Input LOW Current 0.50 µAVIN = V

IL (Min)

Input HIGH Current

Data 350 µAV

= V

IH (Max)

Enable 240

Power Supply Current −59 −29 mA Inputs OPEN

Symbol Parameter

= 0°CT

= +25°CT

= +85°C

Units Conditions

Min Max Min Max Min Max

PLH

Propagation Delay

0.55 1.30 0.55 1.30 0.55 1.40 ns

PHL

Data to Output Figures 1, 2

PLH

Propagation Delay

0.80 1.80 0.80 1.80 0.80 1.90 ns

(Note 4)

PHL

Enable to Output

TLH

Transition Time

0.45 1.30 0.45 1.30 0.45 1.30 ns Figures 1, 2

THL

20% to 80%, 80% to 20%

Page 4

www.fairchildsemi.com 4

100313

Commercial Version (Continued) SOIC and PLCC AC Electrical Characteristics

= −4.2V to −5.7V, VCC = V

CCA

= GND

Note 5: The propagation dela y sp ec if ied is for single output swit c hing. Delays may vary up to 150 ps with multiple outpu ts s w it c hing. Note 6: Output-to-Output Skew is defined as the absolute value of the difference between the actual propagation delay for any outputs within the same pack-

aged device. Th e specif ications apply to any out puts s witchin g in the sa me dire ction e ither HI GH-to-LO W ( t

OSHL

), or LOW-to-HIGH ( t

OSLH

), or in opposite

directions both HL and LH (t

OST

). Parameters t

OST

and tPS guaranteed by design.

Symbol Parameter

TC = 0°CT

= +25°CT

= +85°C

Units Conditions

Min Max Min Max Min Max

PLH

Propagation Delay

0.55 1.20 0.55 1.20 0.55 1.30 ns

PHL

Data to Output Figures 1, 2

PLH

Propagation Delay

0.80 1.70 0.80 1.70 0.80 1.80 ns

(Note 5)

PHL

Enable to Output

TLH

Transition Time

0.45 1.30 0.45 1.30 0.45 1.30 ns Figures 1, 2

THL

20% to 80%, 80% to 20%

OSHL

Maximum Skew Common Edge

PLCC Only Output-to-Output Variation 280 280 280 (Note 6) Data to Output Path

OSHL

Maximum Skew Common Edge

PLCC Only Output-to-Output Variation 290 290 290 (Note 6) Enable to Output Path

OSLH

Maximum Skew Common Edge

PLCC Only Output-to-Output Variation 330 330 330 (Note 6) Data to Output Path

OSLH

Maximum Skew Common Edge

PLCC Only Output-to-Output Variation 360 360 360 (Note 6) Enable to Output Path

OST

Maximum Skew Opposite Edge

PLCC Only Output-to-Output Variation 330 330 330 (Note 6) Data to Output Path

OST

Maximum Skew Opposite Edge

PLCC Only Output-to-Output Variation 360 360 360 (Note 6) Enable to Output Path

Maximum Skew

PLCC Only Pin (Signal) Transition Variation 200 200 200 (Note 6) Data to Output Path

Maximum Skew

PLCC Only Pin (Signal) Transition Variation 200 200 200 (Note 6) Enable to Output Path

Page 5

5 www.fairchildsemi.com

100313

Industrial Version PLCC DC Electrical Characteristics

(Note 7)

= −4.2V to −5.7V, VCC = V

CCA

= GND, T

= −40°C to +85°C

Note 7: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasin g the al l owable syste m opera ti ng ran ge s. Cond it i ons fo r t estin g sho w n in the tabl es are chosen to guarantee operation under “worst case” conditions.

PLCC AC Electrical Characteristics

= −4.2V to −5.7V, VCC = V

CCA

= GND

Note 8: The propagation delay s pec ified is for single output swit c hing. Delays may vary up to 150 ps with multiple outpu ts s witching.

Symbol Parameter

TC = −40°CTC = 0°C to +85°C

Units Conditions

Min Max Min Max

Output HIGH Voltage −1085 −870 −1025 −870

VIN = V

IH(Max)

Loading with

Output LOW Voltage −1830 −1575 −1830 −1620 or V

IL(Min)

50Ω to −2.0V

OHC

Output HIGH Voltage −1095 −1035

VIN = V

IH(Min)

Loading with

OLC

Output LOW Voltage −1565 −1610 or V

IL(Max)

50Ω to −2.0V

Input HIGH Voltage −1170 −870 −1165 −870 mV Guaranteed HIGH Signal for All Inputs

Input LOW Voltage −1830 −1480 −1830 −1475 mV Guaranteed LOW Signal for All Inputs

Input LOW Current 0.50 0.50 µAVIN = V

IL(Min)

Input HIGH Current

Data 350 350 µAVIN = V

IH(Max)

Enable 240 240

Power Supply Current −59 −29 −59 −29 mA Inputs OPEN

Symbol Parameter

TC = −40°CT

= +25°CT

= +85°C

Units Conditions

Min Max Min Max Min Max

PLH

Propagation Delay

0.55 1.20 0.55 1.20 0.55 1.30 ns

PHL

Data to Output Figures 1, 2

PLH

Propagation Delay

0.80 1.70 0.80 1.70 0.80 1.80 ns

(Note 8)

PHL

Enable to Output

TLH

Transition Time

0.45 1.30 0.45 1.30 0.45 1.30 ns Figures 1, 2

THL

20% to 80%, 80% to 20%

Page 6

www.fairchildsemi.com 6

100313

Test Circuitry

Notes:

, V

CCA

= +2V, VEE = −2.5V.

L1 and L2 = equal length 50Ω impedance lines . R

= 50Ω terminator internal to scope.

Decoupling 0.1 µF from GND to V

and VEE.

All unused outputs are loaded with 50Ω to GND. C

= Fixture and stray capacitance ≤ 3 pF.

FIGURE 1. AC Test Circuit

Switching Waveforms

FIGURE 2. Propagation Delay and Transition Times

Page 7

7 www.fairchildsemi.com

100313

Physical Dimensions inches (millimeters) unless otherwise noted

24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide

Package Number M24B

24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide

Package Number N24E

Page 8

www.fairchildsemi.com 8

100313 Low Power Quad Driver

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square

Package Number V28A

Fairchild does not assume any responsibility for use of any circuitr y described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems a re devices or syste ms which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant inju ry to the user.

2. A critical component in any com ponen t of a life su pport device or system whose failure t o perform can be reasonably expected to ca use the failure of the life supp ort device or system, or to affect its safety or effectiveness.

www.fairchildsemi.com