Page 1
www.vishay.com
Aluminum Electrolytic Capacitors
Axial Standard, High Voltage
041/043 ASH
low voltage
021 ASM
138 AML
lighting
applications
Fig. 1
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes
(Ø D x L in mm)
Rated capacitance range, C
Tolerance on C
Rated voltage range, U
Category temperature range
Endurance test at 85 °C 2000 h
Useful life at 85 °C 5000 h
Useful life at 40 °C
Shelf life at 0 V, 85 °C 500 h
Based on sectional
specification
Climatic category IEC 60068 40 / 085 / 56 (450 V: 25 / 085 / 56)
R
R
8 x 18
to 10 x 25
R
1.4 x I
applied:
120 000 h
042/043
AMH-ELB 85 °C
AHH-ELB 105 °C
10 x 30
to 21 x 38
6.8 μF to 220 μF
-10 % to +50 %
160 V to 450 V
-40 °C to +85 °C
(450 V: -25 °C to +85 °C)
8000 h
(450 V: 5000 h)
15 000 h
(450 V: 10 000 h)
applied:
1.8 x I
R
IEC 60384-4 / EN130300
R
240 000 h
(450 V: 160 000 h)
041 ASH, 042 ASH, 043 ASH
Vishay BCcomponents
FEATURES
• Useful life: 5000 h to 15 000 h at 85 °C
• High rated voltage: up to 450 V
• Taped versions up to case Ø 15 mm x 30 mm
available for automatic insertion
• Polarized aluminum electrolytic capacitors, non-solid
electrolyte
• Axial leads, cylindrical aluminum case, insulated with a
blue sleeve
• Mounting ring version not available in insulated form
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• General purpose, industrial, power supply, audio-video
• Smoothing, filtering, buffering at high voltages
• Boards with restricted mounting height, vibration, and
shock resistant
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (T for -10 % to +50 %)
• Rated voltage (in V)
• Upper category temperature (85 °C)
• Date code, in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
• Negative terminal identification
• Series number (041, 042 or 043)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
(V)
C
R
(μF)
6.8 - - 10 x 30 10 x 30 10 x 30 10 x 30
10
15 - 12.5 x 30 12.5 x 30 15 x 30 15 x 30 12.5 x 30
22
33 12.5 x 30 15 x 30 18 x 30 18 x 38 18 x 38 18 x 30
47 15 x 30 18 x 30 18 x 38 18 x 38 18 x 38 18 x 38
68 15 x 30 18 x 38 21 x 38 21 x 38 21 x 38 21 x 38
100 18 x 30 21 x 38 - - - 150 18 x 38 - - - - 220 21 x 38 - - - - -
Revision: 19-Sep-16
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
160 250 350 385 400 450
8 x 18 - 12.5 x 30 12.5 x 30 12.5 x 30 12.5 x 30
- 10 x 30 - - - -
10 x 25 12.5 x 30 15 x 30 18 x 30 18 x 30 15 x 30
10 x 30 - - - - -
For technical questions, contact: aluminumcaps1@vishay.com
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
U
R
1
Document Number: 28329
Page 2
041 ASH, 042 ASH, 043 ASH
www.vishay.com
DIMENSIONS in millimeters AND AVAILABLE FORMS
73 ± 1.6
Ø D
Form BR: Taped on reel
Case Ø D x L = 8 mm x 18 mm to 15 mm x 30 mm
Form BA: Taped in box (ammopack)
Case Ø D x L = 8 mm x 18 mm to 10 mm x 25 mm
L
F
Fig. 2 - Forms BA and BR Fig. 3 - Form AA
Table 1
Ø d
Ø d
Form AA: Axial in box
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
I
AXIAL; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE
8 x 18 5 0.8 - 8.5 18.5 25 1.7 - 500 500
10 x 18 6 0.8 - 10.5 18.5 25 2.5 - 500 500
10 x 25 7 0.8 - 10.5 25.5 30 3.3 - 500 500
10 x 30 00 0.8 55 ± 1 10.5 30.5 35 4.8 340 - 500
12.5 x 30 01 0.8 55 ± 1 13.0 30.5 35 7.4 260 - 400
15 x 30 02 0.8 55 ± 1 15.5 30.5 35 11.7 200 - 250
18 x 30 03 0.8 55 ± 1 18.5 30.5 35 12.9 120 - -
18 x 38 04 0.8 34 ± 1 18.5 39.5 44 19.0 125 - -
21 x 38 05 0.8 34 ± 1 21.5 39.5 44 24.0 100 - -
Note
• For detailed tape dimensions please refer to packaging information: www.vishay.com/doc?28361
AXIAL: FORM AA, BA, AND BR
Ø d l Ø D
max.Lmax.
MASS
F
min.
(g)
Vishay BCcomponents
L
F
PACKAGING QUANTITIES
FORM
AA
FORM
BA
33 ± 1
Ø D
FORM
BR
D
120°
(3 x)
D3
+ 0.1
(3 x)
1.3
0
Form MR:
Case Ø D x L = 15 mm x 30 mm to 21 mm x 38 mm
Especially for applications with severe shocks and vibrations
Mounting holes
90° ± 2°
(3 x)
1.05
1.3
3.6
+ 0.03
- 0.1
0
- 0.05
+ 0.2
- 0.4
L
(3 x)
(3 x)
Ø d1
Ø D2
Fig. 4 - Mounting hole diagram and outline. Form MR: With mounting ring and pins
Table 2
MOUNTING RING; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE
Ø d1 Ø d2 Ø D
15 x 30 02 0.8 1.0 + 0.4 15.5 17.5 16.5 ± 0.2 33 11.7 200
18 x 30 03 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 33 12.9 240
18 x 38 04 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 42 19.0 100
21 x 38 05 0.8 1.0 + 0.4 21.5 22.5 21.5 ± 0.2 42 24.0 100
Revision: 19-Sep-16
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MOUNTING RING: FORM MR
Ø D2
max.
max.
2
D3 L
max.
MASS
(g)
Document Number: 28329
+ 1.0
1
- 0.5
PACKAGING
QUANTITIES
Page 3
www.vishay.com
041 ASH, 042 ASH, 043 ASH
Vishay BCcomponents
ELECTRICAL DATA
SYMBOL DESCRIPTION
C
R
I
R
I
L1
I
L5
Rated capacitance at 100 Hz,
tolerance -10 % to +50 %
Rated RMS ripple current at 100 Hz, 85 °C
Max. leakage current after 1 min at U
Max. leakage current after 5 min at U
R
R
ORDERING EXAMPLE
Electrolytic capacitor 041 series
10 μF / 250 V; -10 % / +50 %
Nominal case size: Ø 10 mm x 25 mm; Form BA
Ordering code: MAL204133109E3
Former 12NC: 2222 041 33109
tan Max. dissipation factor at 100 Hz
ESR
Equivalent series resistance at 100 Hz
(calculated from tan
max.
and CR)
Z Max. impedance at 10 kHz
Note
• Unless otherwise specified, all electrical values in Table 3 apply
= 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
at T
amb
ELECTRICAL DATA AND ORDERING INFORMATION
U
(V)
R
100 Hz
C
(μF)
R
NOMINAL
CASE
SIZE
Ø D x L
(mm)
CASE
CODE
I
R
100 Hz
85 °C
(mA)
I
L1
1 min
(μA)
I
L5
5 min
(μA)
tan
100 Hz
ESR
100 Hz
()
Z
10 kHz
()
LIFE
CODE
(1)
IN BOX
FORM AA
10 8 x 18 5 70 68 14 0.15 24 12 L1 - 04121109E3 04131109E3 -
22 10 x 25 7 150 130 25 0.15 11 5.5 L1 - 04121229E3 04131229E3 -
22 10 x 30 00 190 42 25 0.10 6.8 5.5 L2 04211229E3 04221229E3 - -
33 12.5 x 30 01 270 58 36 0.10 4.5 3.1 L2 04211339E3 04221339E3 - -
47 15 x 30 02 350 78 49 0.10 3.2 2.1 L2 04211479E3 04221479E3 - 04241479E3
160
68 15 x 30 02 420 110 69 0.10 2.2 1.4 L2 04211689E3 04221689E3 - 04241689E3
100 18 x 30 03 580 150 100 0.10 1.5 1.0 L2 04211101E3 - - 04241101E3
150 18 x 38 04 760 230 150 0.10 1.0 0.7 L2 04311151E3 - - 04341151E3
220 21 x 38 05 940 330 220 0.10 0.7 0.5 L2 04311221E3 - - 04341221E3
10 10 x 30 00 130 33 19 0.10 15 11 L2 04213109E3 04223109E3 - -
15 12.5 x 30 01 180 44 27 0.10 10 7.4 L2 04213159E3 04223159E3 - -
22 12.5 x 30 01 220 60 37 0.10 6.8 5.0 L2 04213229E3 04223229E3 - -
250
33 15 x 30 02 290 84 54 0.10 4.5 3.4 L2 04213339E3 04223339E3 - 04243339E3
47 18 x 30 03 400 120 75 0.10 3.2 2.3 L2 04213479E3 - - 04243479E3
68 18 x 38 04 520 160 110 0.10 2.2 1.7 L2 04313689E3 - - 04343689E3
100 21 x 38 05 650 240 150 0.10 1.5 1.1 L2 04313101E3 - - 04343101E3
6.8 10 x 30 00 110 32 18 0.10 22 14 L2 04215688E3 04225688E3 - -
10 12.5 x 30 01 150 42 25 0.10 15 10 L2 04215109E3 04225109E3 - -
15 12.5 x 30 01 180 57 36 0.10 10 6.7 L2 04215159E3 04225159E3 - -
350
22 15 x 30 02 250 79 50 0.10 6.8 4.5 L2 04215229E3 04225229E3 - 04245229E3
33 18 x 30 03 350 110 73 0.10 4.5 3.1 L2 04215339E3 - - 04245339E3
47 18 x 38 04 450 160 100 0.10 3.2 2.1 L2 04315479E3 - - 04345479E3
68 21 x 38 05 560 220 150 0.10 2.2 1.4 L2 04315689E3 - - 04345689E3
6.8 10 x 30 00 110 34 20 0.10 22 14 L2 04218688E3 04228688E3 - -
10 12.5 x 30 01 150 45 27 0.10 15 10 L2 04218109E3 04228109E3 - -
15 15 x 30 02 210 62 39 0.10 10 6.0 L2 04218159E3 04228159E3 - 04248159E3
385
22 18 x 30 03 290 86 55 0.10 6.8 4.1 L2 04218229E3 - - 04248229E3
33 18 x 38 04 380 120 80 0.10 4.5 2.7 L2 04318339E3 - - 04348339E3
47 18 x 38 04 450 170 110 0.10 3.2 2.1 L2 04318479E3 - - 04348479E3
68 21 x 38 05 570 250 160 0.10 2.2 1.4 L2 04318689E3 - - 04348689E3
ORDERING CODE MAL2..........
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING
RING
FORM MR
Revision: 19-Sep-16
3
Document Number: 28329
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Page 4
041 ASH, 042 ASH, 043 ASH
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
NOMINAL
U
(V)
R
100 Hz
(μF)
R
SIZE
Ø D x L
CASE
CODE
CASE
C
(mm)
6.8 10 x 30 00 110 220 110 0.055 11.5 7.3 L2 04216688E3 04226688E3 - 10 12.5 x 30 01 150 240 110 0.055 7.5 4.6 L2 04216109E3 04226109E3 - 15 15 x 30 02 210 250 110 0.055 5.0 3.1 L2 04216159E3 04226159E3 - 04246159E3
400
22 18 x 30 03 290 280 120 0.055 3.5 2.1 L2 04216229E3 - - 04246229E3
33 18 x 38 04 380 320 130 0.055 2.3 1.4 L2 04316339E3 - - 04346339E3
47 18 x 38 04 450 370 140 0.055 1.7 1.1 L2 04316479E3 - - 04346479E3
68 21 x 38 05 560 440 150 0.055 1.2 0.7 L2 04316689E3 - - 04346689E3
6.8 10 x 30 00 110 230 110 0.10 22 14 L3 04217688E3 04227688E3 - 10 12.5 x 30 01 150 240 110 0.10 15 10 L3 04217109E3 04227109E3 - 15 12.5 x 30 01 180 260 110 0.10 10 6.0 L3 04217159E3 04227159E3 - -
450
22 15 x 30 02 240 290 120 0.10 6.8 4.1 L3 04217229E3 04227229E3 - 04247229E3
33 18 x 30 03 350 330 130 0.10 4.5 2.7 L3 04217339E3 - - 04247339E3
47 18 x 38 04 440 390 140 0.10 3.2 2.1 L3 04317479E3 - - 04347479E3
68 21 x 38 05 550 460 160 0.10 2.2 1.4 L3 04317689E3 - - 04347689E3
Note
(1)
Determines the applicable row in the table “Endurance Test Duration and Useful Life”
I
R
100 Hz
85 °C
(mA)
I
L1
1 min
(μA)
I
L5
5 min
(μA)
tan
100 Hz
ESR
100 Hz
()
Z
10 kHz
()
LIFE
CODE
(1)
IN BOX
FORM AA
Vishay BCcomponents
ORDERING CODE MAL2..........
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING
RING
FORM MR
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS
Voltage
U
= 160 V to 250 V Us 1.15 x U
Surge voltage
R
UR = 350 V to 450 V Us 1.1 x U
Reverse voltage U
Current
After 1 min:
case Ø D x L = 8 mm x 18 mm to 10 mm x 25 mm:
CV 1000 μC I
CV 1000 μC I
case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm:
U
= 160 V to 385 V IL1 0.009 CR x UR + 10 μA
Leakage current
R
= 400 V and 450 V IL1 0.009 CR x UR + 200 μA
U
R
After 5 min:
U
= 160 V to 385 V:
R
CV 1000 μC I
CV 1000 μC I
U
= 400 V and 450 V IL5 0.002 CR x UR + 100 μA
R
Inductance
Case Ø D x L mm:
8 x 18 Typ. 35 nH 10 x 18 Typ. 69 nH 10 x 25 Typ. 38 nH -
Equivalent series
inductance (ESL)
10 x 30 Typ. 38 nH -
12.5 x 30 Typ. 46 nH 15 x 30 Typ. 48 nH Typ. 39 nH
18 x 30 Typ. 50 nH Typ. 39 nH
18 x 38 Typ. 54 nH Typ. 39 nH
21 x 38 Typ. 59 nH Typ. 39 nH
AXIAL MOUNTING RING
0.05 CR x UR or 5 μA, whichever is greater
L1
0.03 CR x UR + 20 μA
L1
0.01 CR x UR or 1 μA, whichever is greater
L5
0.006 CR x UR + 4 μA
L5
VALUE
1 V
rev
R
R
Revision: 19-Sep-16
4
Document Number: 28329
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Page 5
www.vishay.com
T
amb
(°C)
050
100
1
10
- 50
ESR
0
ESR
10
2
10
-1
ESR0 = Typical at 20 °C, 100 Hz
2
1
Curve 1: Case Ø D x L = 10 mm x 30 mm to 21 mm to 38 mm
Curve 2: Case Ø D x L = 8 mm x 18 mm to 10 mm to 25 mm
10
6
10
5
10
4
10
3
10
2
f (Hz)
ESR
0
= Typical at 20 °C, 100 Hz
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
3
1
2
2
1
3
Curve 1: Case Ø D x L = 10 mm x 30 mm
Curve 2: Case Ø D x L = 21 mm x 38 mm
Curve 3: Case Ø D x L = 8 mm x 18 mm to 10 mm x 25 mm
CAPACITANCE (C)
1.2
C
C
0
1.1
1.0
0.9
0.8
- 40 - 20 0 20 40 60 80 100
C0 = Capacitance at 20 °C, 100 Hz
Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature
EQUIVALENT SERIES RESISTANCE (ESR)
041 ASH, 042 ASH, 043 ASH
Vishay BCcomponents
T
(°C)
amb
Fig. 6 - Typical multiplier of ESR
as a function of ambient temperature
Revision: 19-Sep-16
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Typical multiplier of ESR as a function of frequency
5
For technical questions, contact: aluminumcaps1@vishay.com
Document Number: 28329
Page 6
www.vishay.com
10
2
10
1
10
-1
Z
( )
Ω
T
amb
(°C)
Z
0
= Impedance at 20 °C, 100 Hz
- 50 0 50 100
2
1
Curve 1: Case Ø D x L = 10 mm x 30 mm to 21 mm to 38 mm
Curve 2: Case Ø D x L = 8 mm x 18 mm to 10 mm to 25 mm
10
6
10
5
10
4
10
3
10
2
f (Hz)
Z
( )
Ω
T
amb
(20 °C)
Case Ø D x L = 10 mm x 18 mm to 10 mm x 25 mm
10
3
10
2
10
1
Curve 1: 10 µF
Curve 2: 22 µF
1
2
10
6
10
5
10
4
10
3
10
2
f (Hz)
Case Ø D x L = 12.5 mm x 30 mm
10
3
10
2
10
1
10
-1
1
2
3
4
5
6
7
8
9
IMPEDANCE (Z)
041 ASH, 042 ASH, 043 ASH
Vishay BCcomponents
3
10
Z
Ω
( )
2
10
10 µF
10
Fig. 8 - Typical impedance of capacitance
1
2
10
3
10
Case Ø D x L = 8 mm x 18 mm
Fig. 9 - Typical impedance as a function of frequency
4
10
5
10
f (Hz)
T
amb
as a function of ambient temperature
Fig. 10 - Typical impedance as a function of frequency Fig. 11 - Typical impedance as a function of frequency
at different ambient temperatures
(°C)
6
10
Revision: 19-Sep-16
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Curve 1: 10 μF, 350 V and 385 V; -40 °C
Curve 2: 15 μF, 250 V; -40 °C
Curve 3: 33 μF, 160 V; -40 °C
Curve 4: 10 μF, 350 V and 385 V; 20 °C
Curve 5: 15 μF, 250 V; 20 °C
Curve 6: 33 μF, 160 V; 20 °C
Curve 7: 10 μF, 350 V and 385 V; 85 °C
Curve 8: 15 μF, 250 V; 85 °C
Curve 9: 33 μF, 160 V; 85 °C
6
For technical questions, contact: aluminumcaps1@vishay.com
Document Number: 28329
Page 7
www.vishay.com
RIPPLE CURRENT AND USEFUL LIFE
Table 3
ENDURANCE TEST DURATION AND USEFUL LIFE
LIFE CODE
L1 2000 5000
L2 8000 15 000
L3 5000 10 000
Note
• Multiplier of useful life code: CCC205
ENDURANCE AT 85 °C
(h)
041 ASH, 042 ASH, 043 ASH
Vishay BCcomponents
USEFUL LIFE AT 85 °C
(h)
I
= Actual ripple current at 100 Hz
A
= Rated ripple at 100 Hz, 85 °C
I
R
(1)
Useful life at 85 °C and IR applied;
Case Ø D x L = 8 mm x 18 mm to
10 mm x 25 mm: 5000 h
Case Ø D x L = 8 mm x 18 mm to
10 mm x 25 mm: 5000 h
(450 V: 10 000 h)
T
amb
CCC205
(°C)
3.3
3.2
I
A
I
R
3.1
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
50
70
40 50 60 70 80 90 100
15
20
30
4.0
6 .0
10
1.5
2.0
3.0
Lifetime multiplier
1.0
(1)
Fig. 12 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 4
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
50 100 300 1000 3000 10 000
I
MULTIPLIER
R
0.75 1.00 1.15 1.30 1.40 1.50
Revision: 19-Sep-16
7
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Document Number: 28329
Page 8
041 ASH, 042 ASH, 043 ASH
www.vishay.com
Table 5
TEST PROCEDURE REQUIREMENTS
TEST
NAME OF TEST REFERENCE
T
= 85 °C; UR applied;
amb
Case Ø D x L:
8 mm x 18 mm to 10 mm x 25 mm:
2000 h;
10 mm x 30 mm to 21 mm x 38 mm:
Endurance
IEC 60384-4 /
EN130300
subclause 4.13
8000 h (450 V: 5000 h)
T
= 85 °C; UR and IR applied;
amb
Case Ø D x L:
Useful life
CECC 30301
subclause 1.8.1
8 mm x 18 mm to 10 mm x 25 mm:
5000 h;
10 mm x 30 mm to 21 mm x 38 mm:
15 000 h (450 V: 10 000 h)
T
= 85 °C; no voltage applied;
Shelf life
(storage at high
temperature)
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
IEC 60384-4 /
EN130300
subclause 4.17
amb
500 h
After test: U
24 h to 48 h before measurement
Revision: 19-Sep-16
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PROCEDURE
(quick reference)
to be applied for 30 min,
R
8
Vishay BCcomponents
REQUIREMENTS
U
= 160 V; C/C: ± 15 %
R
U
= 250 V to 450 V; C/C: ± 10 %
R
tan 1.3 x spec. limit
Z 2 x spec. limit
I
spec. limit
L5
U
= 160 V; C/C: ± 45 %
R
U
= 250 V to 450 V; C/C: ± 30 %
R
tan 3 x spec. limit
Z 3 x spec. limit
I
spec. limit
L5
No short or open circuit
Total failure percentage: 3 %
C/C, tan , Z:
for requirements
see “Endurance test” above
I
2 x spec. limit
L5
Document Number: 28329
Page 9
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Vishay products are not designed for use in life-saving or life-sustaining applications or any application in which the failure of
the Vishay product could result in personal injury or death unless specifically qualified in writing by Vishay. Customers using or
selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized
Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jul-2024
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1
Document Number: 91000
Loading...