DATASENSOR SVS1 User Manual
The SVS1 series is the easiest solution for machine vision applications. The setup is
very quick and intuitive thanks to the VSC unit, the external configurator with 3.5” colour
display. The sensor setting is carried-out through three simple steps: region of interest
definition, control type selection, parameter adjusting. The SVS1 is a fully embedded
vision sensor able to acquire images, control them and activate the digital outputs
according to the result. The VSC unit can provide a real time monitoring of the images,
but it is not required during the functioning of the sensor and so it can be disconnected
and used to setup multiple sensors. SVS1 is able to carry-out 7 different controls:
Brightness, Contrast, Position, Width, Edge counting, Pattern match, OCV. Its flexibility
together with the VSC configurator make the sensor ideal for plants with frequent format
changes (packaging, food, cosmetic, bottling, labelling, …).
VISION SENSORS
VISION SENSORS
•
Fully embedded vision sensor
•
3.5” VSC c
onfigurator
•
7 different controls
•
Memorisation of 8 inspections
holesholes
VISION SENSORS
SVS1
CONNECTIONS
A
B
C
D
mm
DIMENSIONS
INDICATORS
M12 8-POLE
(VSC connection)
M12 8-POLE
(power supply and I/O)
Power supply, green
Digital output 2, yellow
Digital output 1, yellow
VSC connection, green
A
B
C
D
E
F
G
H
Setting mode, green
Adjust mode, green
Monitor mode, green
Main menu, green
Power supply, green
Digital output 1, yellow
Digital output 2, yellow
Sensor connection, green
PIN 1 = white = digital input 1
PIN 2 = brown = 24 Vdc
PIN 3 = green = STROBE for external illuminator
PIN 4 = yellow = output 1
PIN 5 = grey = output 2
PIN 6 = pink = output 3
PIN 7 = blue = GND
PIN 8 = red = external trigger
PIN 1 = Ethernet TX+
PIN 2 = Ethernet RX+
PIN 3 = Ethernet RXPIN 4 = Not used
PIN 5 = 24 Vdc
PIN 6 = Not used
PIN 7 = Ethernet TXPIN 8 = GND
The extremely compact size of the
SVS sensors is not an obstacle for
the full integration of all the elements
for a reliable image-based control.
• Compact housing
• 640 x 480 image sensor
• VSC configurator with 3.5’’ colour
display, 8 push-buttons, 8 LEDs
• Red light LED illuminator
• Selectable lenses
• Standard M12 connectors
• Configurator preset for DIN rail or
panel mounting
• 3 PNP outputs
• 4 signalling LEDs: output1,
output2, power supply,
communication
96
96
90.2
42.5
14
96
14.5
42.5
104
93.4
48
AAC
B
BCD
D
E G
F H
Power supply: 24 Vdc ±10 %
Ripple: 1 Vpp max with illuminator
2 Vpp without illuminator
Consumption (SVS1+VSC): 300 mA @ 24 Vdc (illuminator excluded)
Output type: 3 PNP
Output current: 100 mA max
Saturation voltage:
<<
2 V
VSC connection: M12 8-pole A-code
External illuminator interface: Strobe signal (TTL)
Frame rate: 60 fps
Optics: integrated (6 mm / 8 mm / 12 mm)
Setting: VSC configurator
Sensor indicators: 4 LEDs
VSC indicators: 8 LEDs
Connections: 2 x M12 8-poli A-code
Mechanical protection: IP50 (SVS1)
IP40 (VSC)
Protection devices: A, B
Housing material: aluminium alloy / ABS
Sensor weight: 125 g
VSC weight: 170 g
Operating temperature: -10 ... +50°C
Storage temperature: -25 ... +70°C
1
2
50 mm
500 mm
42 x 30 mm
25 x 20 mm
17 x 12 mm
330 x 232 mm
236 x 167 mm
150 x 110 mm
Operating distance
(mm) SVS1-12-DC-S SVS1-08-DC-x SVS1-06-DC-S
50 17x12 25x20 42x30
80 25x20 40x30 60x41
110 33x25 55x40 80x55
140 45x35 70x50 98x69
170 53x38 85x65 118x83
200 60x50 100x70 138x92
300 90x65 145x103 201x140
400 121x82 186x132 265x189
500 150x110 236x167 330x232
600 185x130 282x232 385x270
FIELD OF VIEW
TECHNICAL DATA
TECHNICAL NOTES
1
Limit values
2
A - reverse polarity protection
B - overload and short-circuit protection
Loading...