Datasat LS10 User Manual

Operating Guide

LS10 Audio Processor

Installation and

Version 1.00

Effective Date: July 2014

Document # 9301H66300

Datasat Digital Entertainment

9631 Topanga Canyon Place

Chatsworth, CA 91311

USA

LS10 Installation and Operating Guide Page 2

Notices

This product contains software proprietary to Datasat Digital Entertainment and protected by US and International
copyright law. Unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited.

WARRANTY/LIMITATION OF LIABILITY

EXCEPT FOR THE LIMITED WARRANTY PROVIDED HEREIN, THIS PRODUCT IS PROVIDED "AS IS"
AND WITHOUT WARRANTY OF ANY KIND. DATASAT DIGITAL ENTERTAINMENT EXPRESSLY
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. DATASAT DIGITAL ENTERTAINMENT DOES NOT WARRANT THAT THIS PRODUCT WILL
MEET USER’S REQUIREMENTS, OR THAT THE OPERATION OF THIS PRODUCT WILL BE
UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THIS PRODUCT WILL BE CORRECTED.
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL DATASAT DIGITAL
ENTERTAINMENT, OR ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS, BE LIABLE TO USER
FOR ANY INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, AND THE LIKE) ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT OR RELATED DOCUMENTATION.

Copyright

LS10 Audio Processor Installation and Operating Guide, Version 1.00

© 2014 Datasat Digital Entertainment. All rights reserved.

The content of this publication is subject to change without notice. Datasat Digital Entertainment assumes no
obligation to notify you of any changes or updates. While Datasat Digital Entertainment believes this publication
is accurate, due to ongoing improvements and revisions, Datasat Digital Entertainment cannot guarantee the
accuracy of printed material, nor can it accept responsibility for errors or omissions. Datasat Digital Entertainment
may periodically publish updates and revisions to this publication as it deems necessary.

DTS is a registered trademark of DTS, Inc.

Dolby is a registered trademark of Dolby Laboratories.

Auro-3D is a registered trademark of Auro Technologies

All other trademarks are the properties of their respective owners.

Manufactured under license from Dolby Laboratories. Dolby and the “double-D” symbol are registered trademarks
of Dolby Laboratories.

Manufactured under a license from U.S. Patent No’s: 5,956,674 , 5,974,380 , 5,978,762 ,6,487,535 , 6,226,616 ,
7,212,872 , 7,003,467 , 7,272,567 , 7,668,723 , 7,392,195 ,7,930,184 , 7,333,929 , 7,548,853 , and 7,283,634. DTS,
the Symbol, and DTS and the Symbol together are registered trademarks & DTS Neo:X / 11.1 is a trademark of
DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

Document No. 9301H66300

July 2014

Record of Changes

Manual Version / Date Description

1.00 July 2014 Production release.

LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.00

LS10 Installation and Operating Guide Page 3

Regulatory Notices

INSTRUCTION TO THE USER

This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

* Consult the dealer or an experienced radio/TV technician for help.

In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of manufacturer could void the user's authority to
operate this equipment.

Canadian Department of Communications compliance statement:

This equipment does not exceed Class B limits per radio noise emissions for digital apparatus
set out in the Radio Interference Regulation of the Canadian Department of Communications.
Operation in a residential area may cause unacceptable interference to radio and TV reception
requiring the owner or operator to take whatever steps are necessary to correct the interference.

Avis de conformite aux normes du ministere des Communications du Canada:

Cet equipment ne depasse pas les limites de Classe B D'emission de bruits radioelectriques
pour les appareils numeriques telles que perscrites par le Reglement sur le brouillage
radioelectrique etabli par le ministere des Communications du Canada. L'exploitation faite en
milieu residentiel peut entrainer le brouillage des receptions radio et television, ce qui olbigerait
le proprietaire ou l'operateur a prendre les dispositions necessaires pour en eliminer les causes.

LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.00

LS10 Installation and Operating Guide Page 4

TABLE OF CONTENTS

Record of Changes 2
Regulatory Notices 3

INTRODUCTION 7

How to Use this Guide 7
About LS10 Audio Processor 7
Features and Benefits 8
Product Details 8
Limited Warranty 10
Product Improvements and Upgrades 10
FACTORY WARRANTY INFORMATION 11
Technical Support Contact Information 11
Software License Agreement 11
Unpacking 13

PART 1: OPERATION 15

1.0 OPERATING LS10 15

1.1 How-To Procedures – Operations 15

1.2 Front Panel Controls and Indicators 16

1.3 Powering ON the LS10 Processor 16

1.3.1 Using the Touch Screen 18

1.4 The Home Screen 18

1.4.1 Adjusting the Volume control 18

1.5 User Setup 19

1.5.1 Network 19

1.5.2 USB 21

1.6 Mode, Audio Processing 24

1.6.1 Auro 3D

1.6.2 DTS Neo X 27

1.6.3 Dolby PLIIx 28

1.6.4 Dolby PLIIz 29

1.6.5 Dolby PLII 29

1.6.6 DRC 30

1.7 Inputs 30

1.8 Troubleshooting (Operation) 31

®

25

PART 2: INSTALLATION AND SETUP 33

2.0 INSTALLATION 33

2.1 Unpacking System Components 34

2.1.1 Preliminary Inspection 34

2.2 Installation Overview 34

2.3 LS10 Rear Panel Connections 34

2.4 Power Supply 35

2.4.1 Changing the Input Voltage Setting and Fuses 36

2.5 Mounting and Connection 37

2.5.1 Rack/Enclosure Requirements 37

LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.00