Page 1
DVM16E2L8/8G
8GB - 240-Pin 2Rx8 Unbuffered ECC DDR3 Low Voltage DIMM
Identification
DVM16E2L8/8G 1Gx72
8GB 2Rx8 PC3L-12800E-11
Performance Range
Clock / Module Speed / CL-t
RCD
–tRP
800 MHz / PC3-12800 / 11-11-11
667 MHz / PC3-10600 / 10-10-10
667 MHz / PC3-10600 / 9-9-9
533 MHz / PC3-8500 / 8-8-8
533 MHz / PC3-8500 / 7-7-7
400 MHz / PC3-6400 / 6-6-6
Features
Description
240-pin JEDEC-compliant DIMM, 133.35 mm wide by 30.00 mm high
Operating Voltage: VDD = VDDQ = +1.35V (1.283V to 1.45V)
Backward-compatible to VDD = VDDQ = +1.5V ±0.075V
On-board I2C temperature sensor with integrated Serial Presence-Detect (SPD) EEPROM
Data Transfer Rate: 12.8 Gigabytes/sec
Data Bursts: 8 and burst chop 4 mode
ZQ Calibration for Output Driver and On-Die Termination (ODT)
Programmable ODT / Dynamic ODT during Writes
Programmable CAS Latency: 6, 7, 8, 9, 10 and 11
Differential Data Strobe signals
SDRAM Addressing (Row/Col/BG/BA): 16/10/3
Fully RoHS Compliant
DVM16E2L8/8G is a low voltage, unbuffered
1Gx72 memory module, which conforms to
JEDEC's DDR3L, PC3L-12800 standard. The
assembly is dual Rank. The rank is comprised of
nine 512Mx8 DDR3 SDRAMs.
One EEPROM is used for Serial Presence Detect
and a combination register/PLL, with Address and
Command Parity, is also used.
Both output driver strength and input termination
impedance are programmable to maintain signal
integrity on the I/O signals in a Fly-by topology.
A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
Notes
Tolerances on all dimensions
except where otherwise
indicated are .13 (.005).
All dimensions are expressed
in millimeters [inches]
DVM16E2L8/8G 10-Nov-15
Copyright 2015 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Loading...