Dataram DRSX4100 User Manual
CUSTOMER SUPPORT
Dataram's Technical Support Program goes beyond the lifetime warranty,
routine calls and questions. As memory specialists since 1967, we want
to provide the most comprehensive level of service and support in the
industry.
Our Customer Support representatives can answer your questions and
give you information on system/memory configurations, upgrade options,
product specifications, compatibility and other technical topics or issues.
In Europe:
+45 70 212 217 (Phone)
+45 70 212 211 (FAX)
eusupport@dataram.com (E-mail)
In the U.S.A. and all other countries:
800-599-0071 (Toll Free)
609-799-0071 (Phone)
609-936-1369 (FAX)
usasupport@dataram.com (E-mail)
If a Dataram memory board does not function properly we will issue a
Return Material Authorization number (RMA#) for the return of the
defective module(s) and express ship a repair or replacement to you at
no charge.
P/N 06697 A
DRSX4100 INSTALLATION INSTRUCTIONS
FOR SUN FIRE X4100 AND X4200 SERVERS
SYSTEM AND MEMORY OVERVIEW
Note: Refer to your system owner’s manual for detailed instructions and be
sure to follow all static and safety precautions.
• The Sun Fire X4100 and X4200 servers have 8 DIMM slots.
• The servers can be configured with one or two processors. In single
processor configurations, only four DIMM slots can be utilized.
• DIMMs must be installed in matched pairs.
P/N 06697 A
CUSTOMER SUPPORT
Dataram's Technical Support Program goes beyond the lifetime warranty,
routine calls and questions. As memory specialists since 1967, we want
to provide the most comprehensive level of service and support in the
industry.
Our Customer Support representatives can answer your questions and
give you information on system/memory configurations, upgrade options,
product specifications, compatibility and other technical topics or issues.
In Europe:
+45 70 212 217 (Phone)
+45 70 212 211 (FAX)
eusupport@dataram.com (E-mail)
In the U.S.A. and all other countries:
800-599-0071 (Toll Free)
609-799-0071 (Phone)
609-936-1369 (FAX)
usasupport@dataram.com (E-mail)
If a Dataram memory board does not function properly we will issue a
Return Material Authorization number (RMA#) for the return of the
defective module(s) and express ship a repair or replacement to you at
no charge.
P/N 06697 A
DRSX4100 INSTALLATION INSTRUCTIONS
FOR SUN FIRE X4100 AND X4200 SERVERS
SYSTEM AND MEMORY OVERVIEW
Note: Refer to your system owner’s manual for detailed instructions and be
sure to follow all static and safety precautions.
• The Sun Fire X4100 and X4200 servers have 8 DIMM slots.
• The servers can be configured with one or two processors. In single
processor configurations, only four DIMM slots can be utilized.
• DIMMs must be installed in matched pairs.
P/N 06697 A
MEMORY INSTALLATION MEMORY INSTALLATION
g
y
g
y
Note: Refer to your system owner’s manual for detailed instructions.
Caution: System parts are sensitive to electrostatic discharge and can be
damaged by the static charge you may carry. You should wear a
rounded wrist strap.
1. Power off the server and remove the main cover.
2. Locate the DIMM slots on the motherboard to which you want to install or
replace a memory module. The DIMM ejector handles on each slot
contain LEDs that can indicate a fault. An amber LED indicates a faulty
DIMM. The server must in standby power mode for the LEDs to light.
3. Each processor can support up to four DIMMs.
4. DIMMs must be installed in matched pairs, beginning with slots 0 and 1
then 2 and 3. The slot pairs are colored black or white.
5. Open both ejector levers on each slot.
6. Position a module over the slot so that the alignment notches on the
DIMM match the notches on the connector.
7. Press firmly with your thumbs on both top ends of the module, applying
equal pressure until the module snaps into place. Lock the module in the
socket by pushing up on the ejector levers until they are in their upright
position.
Caution: Confirm the modules are fully and evenly seated in the slots.
Improper seating can cause electrical shorts that can damage
the memor
8. Continue to install the remaining memory modules until you have filled
the bank with two identical modules. Repeat the above steps for each
bank of memory you wish to install.
9. Reconnect the power cords and external cables, replace the cover and
turn on the system.
10. After you reboot, ensure the system recognizes the new memory
configuration.
MEMORY INSTALLATION MEMORY INSTALLATION
Note: Refer to your system owner’s manual for detailed instructions.
Caution: System parts are sensitive to electrostatic discharge and can be
damaged by the static charge you may carry. You should wear a
rounded wrist strap.
11. Power off the server and remove the main cover.
12. Locate the DIMM slots on the motherboard to which you want to install or
replace a memory module. The DIMM ejector handles on each slot
contain LEDs that can indicate a fault. An amber LED indicates a faulty
DIMM. The server must in standby power mode for the LEDs to light.
13. Each processor can support up to four DIMMs.
14. DIMMs must be installed in matched pairs, beginning with slots 0 and 1
then 2 and 3. The slot pairs are colored black or white.
15. Open both ejector levers on each slot.
16. Position a module over the slot so that the alignment notches on the
DIMM match the notches on the connector.
17. Press firmly with your thumbs on both top ends of the module, applying
equal pressure until the module snaps into place. Lock the module in the
socket by pushing up on the ejector levers until they are in their upright
position.
Caution: Confirm the modules are fully and evenly seated in the slots.
Improper seating can cause electrical shorts that can damage
the memor
18. Continue to install the remaining memory modules until you have filled
the bank with two identical modules. Repeat the above steps for each
bank of memory you wish to install.
19. Reconnect the power cords and external cables, replace the cover and
turn on the system.
20. After you reboot, ensure the system recognizes the new memory
configuration.
and/or the system.
and/or the system.
Loading...