Dataram DRI550D2 User Manual

Page 1

CUSTOMER SUPPORT

Dataram's Technical Support Program goes beyond the lifetime warranty, routine calls and questions. As memory specialists since 1967, we want to provide the most comprehensive level of service and support in the industry.
Our Customer Support representatives can answer your questions and give you information on system/memory configurations, upgrade options, product specifications, compatibility and other technical topics or issues.
In Europe:
+45 70 212 217 (Phone) +45 70 212 211 (FAX)
eusupport@dataram.com (E-mail)
In the U.S.A. and all other countries:
800-599-0071 (Toll Free) 609-799-0071 (Phone) 609-936-1369 (FAX)
usasupport@dataram.com (E-mail)
If a Dataram memory board does not function properly we will issue a Return Material Authorization number (RMA#) for the return of the defective module(s) and express ship a repair or replacement to you at no charge.
P/N 06701 A
DRI550D2 INSTALLATION INSTRUCTIONS
FOR IBM p5+ Models 285, 520, 505, 510, 520, 550

SYSTEM AND MEMORY OVERVIEW

Note: Refer to your system owner’s manual for detailed instructions and be
sure to follow all static and safety precautions.
p5+ Models 285, 520, 505, 510, 520
Memory is installed on a system board that has eight DIMM sockets
The minimum memory requirement is 1GB (2 x 512MB DIMMs)
The maximum memory capacity is 32GB (8 x 4GB DIMMs)
Although memory “features”, or “kits” are available in pairs of
matched DIMMs, it is strongly recommended that memory configurations consist of groups of matched “quads”—four matched DIMMs—for best performance.
p5+ Model 550
Memory is installed on one or two processor cards, each having eight DIMM sockets
The minimum memory requirement is 1GB (2 x 512MB DIMMs)
The maximum memory capacity is 64GB (16 x 4GB DIMMs) with two
processor cards
Although memory “features”, or “kits” are available in pairs of matched DIMMs, it is strongly recommended that memory configurations consist of groups of matched “quads”—four matched DIMMs—for best performance.

P/N 06701 A

CUSTOMER SUPPORT

Dataram's Technical Support Program goes beyond the lifetime warranty, routine calls and questions. As memory specialists since 1967, we want to provide the most comprehensive level of service and support in the industry.
Our Customer Support representatives can answer your questions and give you information on system/memory configurations, upgrade options, product specifications, compatibility and other technical topics or issues.
In Europe:
+45 70 212 217 (Phone) +45 70 212 211 (FAX)
eusupport@dataram.com (E-mail)
In the U.S.A. and all other countries:
800-599-0071 (Toll Free) 609-799-0071 (Phone) 609-936-1369 (FAX)
usasupport@dataram.com (E-mail)
If a Dataram memory board does not function properly we will issue a Return Material Authorization number (RMA#) for the return of the defective module(s) and express ship a repair or replacement to you at no charge.

P/N 06701 A

DRI550D2 INSTALLATION INSTRUCTIONS
FOR IBM p5+ Models 285, 520, 505, 510, 520, 550

SYSTEM AND MEMORY OVERVIEW

Note: Refer to your system owner’s manual for detailed instructions and be
sure to follow all static and safety precautions.
p5+ Models 285, 520, 505, 510, 520
Memory is installed on a system board that has eight DIMM sockets
The minimum memory requirement is 1GB (2 x 512MB DIMMs)
The maximum memory capacity is 32GB (8 x 4GB DIMMs)
Although memory “features”, or “kits” are available in pairs of
matched DIMMs, it is strongly recommended that memory configurations consist of groups of matched “quads”—four matched DIMMs—for best performance.
p5+ Model 550
Memory is installed on one or two processor cards, each having eight DIMM sockets
The minimum memory requirement is 1GB (2 x 512MB DIMMs)
The maximum memory capacity is 64GB (16 x 4GB DIMMs) with two
processor cards
Although memory “features”, or “kits” are available in pairs of matched DIMMs, it is strongly recommended that memory configurations consist of groups of matched “quads”—four matched DIMMs—for best performance.
P/N 06701 A
Page 2

MEMORY INSTALLATION

g
g
Note: Refer to your system owner’s manual for detailed instructions.
Caution: System parts are sensitive to electrostatic discharge and can be
IntelliStation POWER 285, p5 520/520Q (9131-52A), p5 505/505Q (9115-
505), p5 510/510Q (9110-51A)
Remember that ordering and installing DIMMs in matched quads is preferred with the first quad being J0A, J2A, J0C and J2C and the second quad being J0B, J2B, J0D and J2D.
p5 550/550Q (9133-55A
Remember that ordering and installing DIMMs in matched quads is preferred with the first quad being J0A, J2A, J0C and J2C and the second quad being J0B, J2B, J0D and J2D.
It is also recommended that each processor card have an equal amount of memory installed. Balancing memory across the cards improves performance.
damaged by the static charge you may carry. You should wear a
rounded wrist strap.
Memory is installed in the following order:
The first pair is installed in J0A and J2A
The second pair is installed in J0C and J2C
The third pair is installed in J0B and J2B
The fourth pair is installed in J0D and J2D
Memory is installed on each processor card in the following order:
The first pair is installed in J0A and J2A
The second pair is installed in J0C and J2C
The third pair is installed in J0B and J2B
The fourth pair is installed in J0D and J2D

MEMORY INSTALLATION

MEMORY INSTALLATION MEMORY INSTALLATION
Note: Refer to your system owner’s manual for detailed instructions.
Caution: System parts are sensitive to electrostatic discharge and can be
IntelliStation POWER 285, p5 520/520Q (9131-52A), p5 505/505Q (9115-
505), p5 510/510Q (9110-51A)
Remember that ordering and installing DIMMs in matched quads is preferred with the first quad being J0A, J2A, J0C and J2C and the second quad being J0B, J2B, J0D and J2D.
p5 550/550Q (9133-55A
Remember that ordering and installing DIMMs in matched quads is preferred with the first quad being J0A, J2A, J0C and J2C and the second quad being J0B, J2B, J0D and J2D.
It is also recommended that each processor card have an equal amount of memory installed. Balancing memory across the cards improves performance.
damaged by the static charge you may carry. You should wear a
rounded wrist strap.
Memory is installed in the following order:
The first pair is installed in J0A and J2A
The second pair is installed in J0C and J2C
The third pair is installed in J0B and J2B
The fourth pair is installed in J0D and J2D
Memory is installed on each processor card in the following order:
The first pair is installed in J0A and J2A
The second pair is installed in J0C and J2C
The third pair is installed in J0B and J2B
The fourth pair is installed in J0D and J2D
Loading...