Page 1
CUSTOMER SUPPORT
Dataram's Technical Support Program goes beyond the lifetime warranty,
routine calls and questions. As memory specialists since 1967, we want
to provide the most comprehensive level of service and support in the
industry.
Our Customer Support representatives can answer your questions and
give you information on system/memory configurations, upgrade options,
product specifications, compatibility and other technical topics or issues.
In Europe:
+45 70 212 217 (Phone)
+45 70 212 211 (FAX)
eusupport@dataram.com (E-mail)
In the U.S.A. and all other countries:
800-599-0071 (Toll Free)
609-799-0071 (Phone)
609-936-1369 (FAX)
usasupport@dataram.com (E-mail)
If a Dataram memory board does not function properly we will issue a
Return Material Authorization number (RMA#) for the return of the
defective module(s) and express ship a repair or replacement to you at
no charge.
P/N 06695 A
DRHXW9300 INSTALLATION INSTRUCTIONS
SYSTEM AND MEMORY OVERVIEW
Note: Refer to your system owner’s manual for detailed instructions and be
sure to follow all static and safety precautions.
• The HP xw9300 workstation has 8 DIMM slots.
• The xw9300 can be configured with one or two processors. In single
processor configurations, only four DIMM slots can be utilized.
• DIMMs must be installed in matched pairs.
P/N 06695 A
CUSTOMER SUPPORT
Dataram's Technical Support Program goes beyond the lifetime warranty,
routine calls and questions. As memory specialists since 1967, we want
to provide the most comprehensive level of service and support in the
industry.
Our Customer Support representatives can answer your questions and
give you information on system/memory configurations, upgrade options,
product specifications, compatibility and other technical topics or issues.
In Europe:
+45 70 212 217 (Phone)
+45 70 212 211 (FAX)
eusupport@dataram.com (E-mail)
In the U.S.A. and all other countries:
800-599-0071 (Toll Free)
609-799-0071 (Phone)
609-936-1369 (FAX)
usasupport@dataram.com (E-mail)
If a Dataram memory board does not function properly we will issue a
Return Material Authorization number (RMA#) for the return of the
defective module(s) and express ship a repair or replacement to you at
no charge.
P/N 06695 A
DRHXW9300 INSTALLATION INSTRUCTIONS
SYSTEM AND MEMORY OVERVIEW
Note: Refer to your system owner’s manual for detailed instructions and be
sure to follow all static and safety precautions.
• The HP xw9300 workstation has 8 DIMM slots.
• The xw9300 can be configured with one or two processors. In single
processor configurations, only four DIMM slots can be utilized.
• DIMMs must be installed in matched pairs.
P/N 06695 A
Page 2
MEMORY REMOVAL
g
y
g
y
Note: Refer to your system owner’s manual for detailed instructions.
Caution: System parts are sensitive to electrostatic discharge and can be
damaged by the static charge you may carry. You should wear a
rounded wrist strap.
1. Single processor models will utilize DIMM pairs 1 and 3 only. The first
pair of modules is to be installed in DIMM pair 1 (blue sockets) and the
second pair in DIMM pair 3 (black sockets).
MEMORY INSTALLATION
3. Open both ejector levers on each slot.
4. Position a module over the slot so that the alignment notches on the
DIMM match the notches on the connector.
5. Press firmly with your thumbs on both top ends of the module, applying
equal pressure until the module snaps into place. Lock the module in the
socket by pushing up on the ejector levers until they are in their upright
position.
2. Dual processor models will utilize all four DIMM pairs. The first pair of
modules is to be installed in DIMM pair 1 (blue sockets), the second pair
in DIMM pair 2 (blue sockets), the third pair in DIMM pair 3 (black
sockets) and the fourth in DIMM pair 4 (black sockets).
Caution: Confirm the modules are fully and evenly seated in the slots.
Improper seating can cause electrical shorts that can damage
the memor
and/or the system.
6. Continue to install the remaining memory modules until you have filled
the bank with two identical modules. Repeat the above steps for each
bank of memory you wish to install.
7. Reconnect the power cords and external cables, and turn on the system.
8. After you reboot, ensure the system recognizes the new memory
configuration.
MEMORY REMOVAL MEMORY INSTALLATION
Note: Refer to your system owner’s manual for detailed instructions. 3. Open both ejector levers on each slot.
Caution: System parts are sensitive to electrostatic discharge and can be
damaged by the static charge you may carry. You should wear a
rounded wrist strap.
1. Single processor models will utilize DIMM pairs 1 and 3 only. The first
4. Position a module over the slot so that the alignment notches on the
DIMM match the notches on the connector.
5. Press firmly with your thumbs on both top ends of the module, applying
equal pressure until the module snaps into place. Lock the module in the
socket by pushing up on the ejector levers until they are in their upright
position.
pair of modules is to be installed in DIMM pair 1 (blue sockets) and the
second pair in DIMM pair 3 (black sockets).
2. Dual processor models will utilize all four DIMM pairs. The first pair of
modules is to be installed in DIMM pair 1 (blue sockets), the second pair
in DIMM pair 2 (blue sockets), the third pair in DIMM pair 3 (black
sockets) and the fourth in DIMM pair 4 (black sockets).
Improper seating can cause electrical shorts that can damage
the memor
and/or the system.
Caution: Confirm the modules are fully and evenly seated in the slots.
6. Continue to install the remaining memory modules until you have filled
the bank with two identical modules. Repeat the above steps for each
bank of memory you wish to install.
7. Reconnect the power cords and external cables, and turn on the system.
8. After you reboot, ensure the system recognizes the new memory
configuration.
Loading...