Page 1
DAP-SW1003
HDMI 4x2 Matrix Switcher
DAP-SW1003
HDMI 4x2 MATRIX SWITCHER
USER MANUAL
Contents
1.0 Introduction ..................................................................................................... 2
2.0 Features ........................................................................................................... 2
3.0 Specification .................................................................................................... 3
4.0 Package Contents ............................................................................................ 3
5.0 Panel Descriptions ........................................................................................... 4
6.0 Operation ........................................................................................................ 4
7.0 Connection Diagram ........................................................................................ 5
Page 2
DAP-SW1003
HDMI 4x2 Matrix Switcher
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 Introduction
The DAP-SW1003 routes high definition video in multiple resolutions up to 1080p
plus multichannel digital audio from any of the four HDMI sources to two
independent outputs.
2.0 Features
De-embeds output ‘A’ HDMI audio to analogue/digital.
2ch or 5.1ch audio can be selected using Remote control for output A.
Supports up to 1080p resolutions and HDCP.
Supports 225MHz/2.25Gbps per channel bandwidth.
Supports 12bit per channel (36bit all channels) deep colour.
Supports uncompressed audio such as LPCM.
Supports compressed audio such as DTS Digital, Dolby Digital (including
DTS-HD and Dolby True HD).
Support 3D.
Page 3
DAP-SW1003
HDMI 4x2 Matrix Switcher
3.0 Specification
Inputs
4x HDMI
Outputs
2x HDMI; 3.5mm Audio; S/PDIF(Coax &
TOSLINK)
Vertical Frequency Range
50/60Hz
Video Amplifier Bandwidth
2.25Gbps/225MHz
Interlaced Resolutions(50&60Hz)
480i, 576i, 1080i
Progressive Resolutions(50&60Hz)
480p, 576p, 720p, 1080p
Limited Warranty
1 Year
Operating Temperature
0°C to 70°C
Operating Humidity
10% to 85% RH (no condensation)
Storage Temperature
-10°C to +80°C
Storage Humidity
5% to 90% RH (no condensation)
Power Supply
5V DC @ 2A
Power consumption
8W
Power Supply/Main Unit Cert
FCC, CE
Note: Specifications are subject to change without notice.
4.0 Package Contents
1) Main unit.
2) 5V DC Power supply.
3) Remote Control.
4) This user manual.
Page 4
DAP-SW1003
HDMI 4x2 Matrix Switcher
5.0 Panel Descriptions
6.0 Operation
Front button control
The “Output A” button will cycle Output A to the next input (1 through 4).
The “Output B” button will cycle Output B to the next input (1 through 4).
Remote control
The “ON/OFF” buttons will individually turn each respective output on/off.
The “1”, “2”, “3”, “4” buttons will switch to that input for the respective output.
The “Mute” button will mute the audio output from all audio connectors.
The “2CH" and "5.1CH" buttons will set the de-embedded audio output mode.
5.1ch audio can only be output from the Coaxial and TOSLINK connectors and only
if the source supports 5.1ch audio output over HDMI. The 3.5mm analogue audio
will only ever output 2ch audio.
Page 5
DAP-SW1003
HDMI 4x2 Matrix Switcher
7.0 Connection Diagram
Loading...