DataParts DAP-EX2837 User Manual

Page 1
DAP-EX2837
VGA + Audio Extender over UTP with Sender Loop out
DAP-EX2837
VGA + AUDIO EXTENDER OVER
CAT5E/6 WITH SENDER LOOP OUT
USER MANUAL
Contents
1.0 Introduction ........................................................................................... 2
2.0 Features ................................................................................................. 2
3.0 Specifications ......................................................................................... 3
4.0 Package Contents ................................................................................... 3
5.0 Panel Descriptions .................................................................................. 4
6.0 Connection Diagram .............................................................................. 4
Page 2
DAP-EX2837
VGA + Audio Extender over UTP with Sender Loop out
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
1.0 Introduction
The DAP-EX2837 is an ideal device for extending VGA and audio signals that
also need to be looped out at the sender end. It distributes the input of the
VGA signal and audio signal to the local and remote outputs simultaneously.
2.0 Features
Extend VGA video and stereo audio signal max up to 300m over one
UTP cable.
Adjustable GAIN (brightness) and PEAK (skew) to accommodate for
different lengths of UTP cable.
Supports resolution max up to 1920x1200. Sender outputs 1x VGA loop output for local site, plus 1 x UTP output
for remote site.
Page 3
DAP-EX2837
VGA + Audio Extender over UTP with Sender Loop out
3.0 Specifications
Input connector
VGA(Female 15pin), Stereo Audio
Output connector
VGA(Female 15pin), Stereo Audio,1xRJ45
Vertical Frequency Range
60/75/85Hz
Resolutions(PC)
640x480; 800x600; 1024x768; 128Ox720; 1280x768; 1280x960; 1600x900; 1600x1200; 1920x1080; 1920x1200
Size (Sender)
100mm x 65mm x 26mm
Weight (Sender)
208g
Size (Receiver)
82mm x 43mm x 23mm
Weight (Receiver)
108g
Limited Warranty
1 Year
Operating Temperature
0°C to 70°C
Operating Humidity
10% to 85% RH (no condensation)
Storage Temperature
-10°C to +80°C
Storage Humidity
5% to 90% RH (no condensation)
Power Supply (Sender & Receiver)
5VDC @ 2A
Main Unit/Power Supply Cert
FCC, CE
Note: Specifications are subject to change without notice.
4.0 Package Contents
1) 1x Main Unit Sender
2) 1x Main Unit Receiver
3) 2x 5V@2A DC Power Supply
4) This user manual
Page 4
DAP-EX2837
VGA + Audio Extender over UTP with Sender Loop out
5.0 Panel Descriptions
6.0 Connection Diagram
Loading...