Datapaq PA0082 Data Sheet

®

Oven Tracker

Thermocouple Range 2

A comprehensive range to suit your exact
application needs

• Designed to be accurate, repeatable and easy to operate

• Exceptionally durable, quad wrapped, 10 strand 36 AWG (0.125 mm/0.005 in),
metal braid and PTFE sheathed* Type K thermocouple

• Specified to ANSI MC96.1 Special Limits of Error
(±0.4% or ±1.1ºC/±2.0ºF, whichever is greater)

• IEC584 color standard (green) for Type K thermocouples

• Strong ‘crimped’ plug/cable attachment

• Circular cable cross section to reduce kinking and twisting

• Various cable lengths available

(*does not apply to PA0060/61/62, PA0215 and PA0180/82)

CLAMP THERMOCOUPLES

Clamp Surface

Clips to non-ferrous components for measuring substrate temperature.

PA0011 1.5 m (5 ft) Maximum temperature 265ºC (509ºF)
PA0012 3.0 m (10 ft) Maximum temperature 265ºC (509ºF)

Clamp Air

Clips to non-ferrous components for measuring the surrounding ambient air temperature.

PA0021 1.5 m (5 ft) Maximum temperature 265ºC (509ºF)
PA0022 3.0 m (10 ft) Maximum temperature 265ºC (509ºF)

EXPOSED JUNCTION THERMOCOUPLES

Exposed junction designed for use on test pieces that are left permanently rigged.
Attached to the substrate by spot welding, soldering, use of high temperature tape or
screw (washer). Used in applications, where conventional magnetic and clip attachment
methods are not appropriate.

PA0063 1.5 m (5 ft) Exposed Junction
Maximum temperature 265ºC (509ºF)

PA0064 3.0 m (10 ft) Exposed Junction
Maximum temperature 265ºC (509ºF)

PA0081 1.5 m (5 ft) Washer
Maximum temperature 265ºC (509ºF)

PA0082 3.0 m (10 ft) Washer
Maximum temperature 265ºC (509ºF)

ADHESIVE PATCH THERMOCOUPLE

Ultra fast response, single strand and PTFE coated. Employs self-adhesive patch for attachment.
Its minimal thermal mass makes it ideal for small items or plastics. Recommended for use in
IR ovens, if the thermocouple requires over coating prior to the test.

PA0061 1.0 m (3 ft) Maximum temperature 265ºC (509ºF)
PA0060 1.5 m (5 ft) Maximum temperature 265ºC (509ºF)
PA0062 3.0 m (10 ft) Maximum temperature 265ºC (509ºF)

EXPOSED JUNCTION THERMOCOUPLE – HIGH TEMPERATURE

Exposed junction thermocouple constructed of glass fiber cable and designed for high temperature coating
applications, such as PTFE or Dacromet cure. Attached to the substrate by either high temperature tape or
screw, or spot welded into position.

PA0215 0.8 m (2.6 ft) Fast response, glass fiber
Maximum temperature 500ºC (932ºF)

PA0182 1.5 m (5 ft) Glass fiber
Maximum temperature 500ºC (932ºF)

PA0180 3.0 m (10 ft) Glass fiber
Maximum temperature 500ºC (932ºF)

The Worldwide Leader in Temperature Profiling

Europe and Asia

DATAPAQ Limited,
Deanland House, 160 Cowley Road,
Cambridge CB4 OGU, UK
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.datapaq.com

North and South America

DATAPAQ Inc,
187 Ballardvale Street,
Willmington, MA 01887, USA
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.datapaq.com

Germany

DATAPAQ GmbH,
Valdorfer Straße 100
D-32602 Vlotho, Deutschland
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.datapaq.de

www.datapaq.com

© 2011 Datapaq (2052 Rev B) 6/2011

Datapaq, the Datapaq logo and Oven Tracker

are registered trademarks of Datapaq.

Specifications subject to change without notice.