Datamax-O'Neil RL3-4 Multiple Unit Charging Adapter User Manual
Multiple Unit Charging Adapter
3
1
2
1
RL3/4
* Power Supply and cord not included
4
4
4
4
Warnings/Safety Guidelines
• This charging adapter cannot be used for any other type of printer.
• Do not operate the charging adapter if cables or adapter appear damaged.
• Do not disassemble, incinerate, or short circuit charging adapter, or related components.
• Do not operate the charging adapter or power supply near water.
• To reduce risk of electric shock, disconnect the charging adapter before cleaning.
• Power Supply input is 110V - 220V AC auto-ranging. Alternate input cables for various countries are available.
• Use of power supplies not approved by Datamax-O'Neil could cause damage to the batteries or the printer and will void the warranty.
5hrs
110277000 Rev.2, Copyright © 2012
No Liability for Negligent Use
In no event shall Datamax-O'Neil be held liable for any damages whatsoever (including, without limitations, damages for loss of profits,
business interruption, loss of information, or other pecuniary loss) arising out of negligence in use and care of the product.
Loading...